Anker Anker Soundcore Liberty 2 Manual

Anker Anker Soundcore Liberty 2

Product specification

Product number : Anker Soundcore Liberty 2
Bluetooth version : 5.0
Audio decoding : SBC、AAC、aptX
Battery capacity : Charging compartment 500mAh, headset 65mAh*2
Endurance : 32 hours, 8 hours per ear
The number of times the charging compartment recharges the headset : About 4th
Charging Time :
Charge for 1.5 hours, support Qi wireless charging;
Fast charge function: charge for 10 minutes, listen for 2 hours
Weight : 5.1g per ear, 42.3g charging compartment

Instructions

Bluetooth pairing

1. After taking out both ears, wait for the right ear to flash white light quickly and the left ear to flash white light slowly
2. Turn on the phone’s Bluetooth pairing “Soundcore Liberty 2”
   (You have to wait another 3-5 seconds to pop up another window, click on the pairing “Soundcore Liberty 2-L” to Calculated complete)
3. Single ear mode: Both left and right ears can be switched directly without re-pairing Put one ear back into the charging compartment, it will be in monaural mode, take it out again, it will return to binaural mode
4. A small step: After opening the charging compartment, press the rear circular button for 3-5 seconds, and wait for the right ear to flash white light quickly.
   To re-pair the device directly

Reset method

1. Delete the device pairing record on the phone
2. Put the headset back into the charging compartment and close it and wait for 5 seconds
3. After opening the charging compartment, press the round button behind the charging compartment for 10 seconds
4. Until the headset flashes red light 3 times, the reset is successful and you can re-pair

Instructions

1. Switch on/off: take out/put back the charging box;
   Long press for 1 second to turn on, long press for 5 seconds to turn off
2. Adjust the volume: APP or connected device
3. Switch tracks: tap the left/right ear twice
4. Play/pause, answer/hang up: tap the left/right ear once
5. Reject the call: Long press the left/right ear for 1 second
   (The above operations are all preset by the original factory, and the demo opportunity may be different due to changes during the trial period)
6. SoundcoreAPP: can change button functions, adjust EQ and HeardID
7. Charging compartment power display: one light flashing is <30%, one light is on and one light is flashing for 30%-70%,
   Two lights are on and the third light is flashing at >70%, and all lights are on at 100%