Pairing
True Wireless Stereo connection
Slow flashing white (Breathing-like) True Wireless Stereo pairing mode
Steady white (For 1 second)
True Wireless Stereo connection is successful (the right earbud is connected to the left earbud).
Bluetooth connection (Device)
Enter pairing mode when earbuds are switched on.
Rapidly flashing white Pairing mode Slow flashing white Connected to a device
Controls
Reset
Reset the earbuds if you can only hear sound on one side: 1. Delete the “Soundcore Liberty Air” in device’s bluetooth list, and turn off the bluetooth on your device.
2. Only take one earbud out of the charging case. Tap the multifunction touchpad on the earbud for 4 times. Repeat the same on the other earbud.
3. Put both earbuds into the charging case.
4. Then take both earbuds out of the charging case, place them near each other, then the LED indicator will start flashing in white(breathing-like).
5. Once the LED indicator on right earbud flashes white, go to the Bluetooth® pairing list on your device and select “Soundcore Liberty Air”.
Specifications
Specifications are subject to change without notice.
- Input : 5 V 0.5 A
- Charging time : 2 hours
- Playtime (varies by volume level and content): 5 hours
- Weight (product net weight) : 55 g / 1.9 oz
- Impedance : 16
- Driver (full range) : 6 mm × 2
- Frequency response : 20 Hz – 20 KHz
- Bluetooth version : V 5.0
- Range : 10 m / 33 ft
Customer Service
18-month limited warranty
Lifetime technical support
[email protected]
+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the radio equipment type A3902 is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.soundcore.com/
Maximum output power: 4dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
FCC ID: 2AOKB-A3902 IC: 23451-A3902 204-820407