Armitron – ItsManual

Armitron WR330 Watch Manual

ItsManual — Sun, 12 Sep 2021 14:48:18 +0000

Armitron WR330 (40/8125) Watch

Button Layout

Alarm (ADJ.) A / C Date (ST/STP)
Mode B / D Light (EL)

Set time/date

Press and hold B (Mode) alarm hours flash
Press (Alarm) to advance these
Press B (Mode) again, seconds will flash,
press A (Alarm) to advance these
Press C (Date), minutes flash, press A to advance these
Press C again, hours flash, press A to advance these
Press C again, month flashes, press A to advance these
Press C again, Date flashes, press A to advance these
Press C again, Date flashes, press A to advance

Armitron M1099 Watch Instructions

ItsManual — Tue, 22 Nov 2022 10:41:39 +0000

INSTRUCTIONS MANUAL

FEATURES

Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the Week)
Calendar Mode (Month, Date, and Day of the Week)
(3) 24 Hour Daily and Weekly Alarms
Hourly Chime: One ‘Beep’ sound every full Hour
Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a second with Lap Operation
Countdown Timer
Second Time Zone
12/24 Hour (Military Time)
Water Resistant as indicated on the watch
INSTALITE – Electro Luminescent Display

EL LIGHT FEATURE

Press ‘D’ in any mode to illuminate the watch face. The backlight will remain lit for 2 to 3 seconds.
NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.

SELECTING FEATURES

Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week.
From Time Telling Mode, press and hold ‘C’. Calendar Mode appears and the Month, Date, and Day of the Week are displayed. Release ‘C’ to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ once. Chronograph appears. Press ‘B’ four times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’ three times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ three times. Timer Mode appears. Press ‘B’ twice to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ four times. Second Time Zone Mode appears. Press ‘B’ once to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

From lime Telling Mode, press and hold ‘A’. Seconds flash. Press ‘C’ to zero out the Seconds.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to time.
Press ‘B’. Hours flash. Press ‘C’ to advance the Hour.
NOTE: Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour
Format is selected, ‘PM’ indicates ‘p.m.’ times; there is no indicator for ‘a.m.’ times.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
Press ‘B’. Months flash. Press ‘C’ to advance the Months.
Press ‘B’. The Date flashes. Press ‘C’ to advance the Date.
Press ‘B’. The Day of the Week flashes. Press ‘C’ to advance the Day.
Press ‘B’. 12/24 Hour Time Format flashes. Press ‘C’ to select either 12 Hour Time or 24 Hour (Military) Time.
NOTE: ‘PM’ indicates ‘p.m.’ times in 12 Hour Format; there is no indicator tor ‘a.m.’ times. ‘24HR’ indicates 24 Hour (Military Time).
Press ‘A’ to end sequence and return to Time Telling Mode.

STOPWATCH

From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode.
Press ‘C’ to start timing.
Press ‘C’ again to stop timing.
Press ‘A’ to reset to zero.
Press ‘B’ to return to Time Telling Mode.

SPLIT TIME

While in the Stopwatch Mode, press ‘C’ to start timing.
Press ‘A’ to measure and display Split Times.
Press ‘C’ to stop timing at the end of the event.
Press ‘A’ to reveal the final Split Time.
Press ‘A’ again to reset to zero.
Press ‘B’ to return to Time Telling Mode.

SETTING THE 24 HOUR ALARM

From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode.
Press and hold ‘A’. The Alarm Number flashes. Press ‘C’ to select the Alarm Number (Al-A3).
Press ‘B’. Alarm Hours flash. Press ‘C’ to adjust the Hours.
Press ‘B’. Alarm Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘B’. Normal Time/Dual Time Alarms flash. Press ‘C’ to select either Normal Time (Tl) or Dual Time (T2) Alarm.
Press ‘B’. Daily or Weekly Alarms flash. Press ‘C’ to select either the Daily (DA) or the Weekly (WE) Alarm. If the Weekly Alarm is selected, press ‘B’ then press ‘C’ to select the Day of the Week.
Press ‘B’. then press ‘C’ to activate or deactivate the selected Alarm.
Press ‘A’ to end set sequence
Press ‘B’ to return to Time Telling Mode.

ACTIVATING ALARM + HOURLY CHIME

While in Alarm Mode, press ‘A’ to select the Alarm (Al-A3), Hourly Chime (CH), and “Beep” sound (BP).
Press ‘C’ to activate or deactivate the selected Alarm, Hourly Chime, or “Beep” sound.
NOTE: The Alarm or Chime Symbols appear when the Alarm and Hourly Chime are activated. “ON” indicates that the “Beep” will sound. When the Alarm is activated, the selected Alarm will sound at the preset Alarm Time for 20 seconds or until any button is pressed. When the Hourly Chime is activated, the Hourly Chime will sound with one “Beep” eve,y hour on the hour.
Press ‘B’ to return to Time Telling Mode.

SECOND TIME ZONE

From Time Telling Mode, press ‘B’ four times to enter the Second Time Zone Mode.
Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode.
NOTE: The Second Time (Second Time Zone) Clock may be used to keep track of a foreign time.

COUNTDOWN TIMER

From Time Telling Mode, press ‘B’ three times to enter the Timer Mode.
Press and hold ‘A’. Hours flash. Press ‘C’ to adjust the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
When the Countdown Timer is set, press ‘A’ to end set sequence and return to Timer Mode.
Press ‘C’ to start the Countdown Timer.
If desired, press ‘C’ to stop the Countdown Timer. Press ‘C’ again to resume the Countdown Timer.
NOTE: The Countdown timing will continue in any mode until any button is pressed. When the Timer has expired, the alarm will sound for 10 seconds or until any button is pressed.
Press ‘C’ to stop the Timer.
Press ‘B’ to return to Time Telling Mode.

CHANGING THE BATTERY

Change the battery when the watch becomes slow, the readout darkens or does not appear, or the backlight fails. Before removing the old battery, be sure to denote its polarity so that the new battery is installed in exactly the same way. Replace with the same kind or equivalent only. This watch contains precise electronic components and should only be opened by a qualified watch technician. However, it is not necessary to return your watch to the manufacturer for battery replacement. It is recommended that you bring your timepiece to a local jeweler.

WATER RESISTANCE

This is a WATER RESISTANT watch. Do not operate push buttons below the surface of the water. Should water or condensation appear in the watch, immediately have the watch checked. Water can corrode electronic parts inside the case.

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

If your watch requires cleaning, lubrication, battery changing, or needs a crystal replaced, Armitron Adventure approved Service Centers are available in your area. These repair facilities use Armitron Adventure parts and components to assure quality and future performance. Free estimates are available in advance, should you need servicing or repairs not covered under the warranty. Repairs covered under the warranty may require proof
of purchase, so retain the purchase receipt.

RETURN YOUR WATCH FOR SERVICING

Please call (718) 482-4195 for a listing of all approved and authorized service centers and locations, or visit our website at: WWW.ARMITRON.COM

YOUR WATCH SHOULD NOT BE RETURNED TO THE PLACE OF PURCHASE. Carefully pack your watch in a sturdy box (do not send in a gift box for same will not be returned) and mail to the nearest approved authorized service station. Because of possible loss, we recommend that you insure the watch, return receipt requested, when using the mail. If you do not receive a receipt within a reasonable time, start a tracer through the originating post office. Never include a special watch band or any other article of personal value in your shipment.

Armitron Digital Watch MD0699 User Manual

ItsManual — Mon, 21 Nov 2022 16:38:38 +0000

MD0699

LIMITED LIFETIME WARRANTY & INSTRUCTIONS MANUAL

FEATURES

Standard display mode: Hour, Minutes, Seconds, Month, Day of the Week.
Function:
• Alarm function with buzzer signal output.
• Chronograph function with lap operation.
• Hourly Chime
• 12/24 Hour (Military Time).
• Second Time Zone
• Water Resistant as indicated on the watch
• INSTALITE – Electro Luminescent Display
Press ‘A’ Minutes flash. Press ‘C’ to advance the Minutes.
Normal operating temperature range: 10”C-40’C.
Press ‘B’ twice return to Time Telling Mode.

SELECTING FEATURES

Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week.
From Time Telling Mode, press ‘B’ once. Alarm Mode appears. Press ‘B’ three times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ twice. Stopwatch Mode appears. Press ‘ B’ two times to return to Time Telling Mode.

SPLIT TIME

While in Stopwatch Mode, press ‘D ‘to start timing.
Press ‘A’ to display split time, stopwatch timing continues internally.
Press ‘A’ to clear sp lit time and continue time measurement.
Repeat step 2 and 3 and u can measure the multi-split time.
Press ‘D’ to stop the stopwatch
Press ‘A’ to reset to zero.
Press ‘B’ twice return to Time Telling Mode.

SETTING THE 24 HOUR ALARMS

From lime Telling Mode, press ‘B’ once to enter the Alarm Mode.
Press ‘A’. Alarm Hours flash. Press ‘D’ to advance the Alarm Hour.
Press ‘B’ Alarm Minutes flash. Press ‘D’ to advance the Alarm Minute.
NOTE: Pressing and holding ‘D’ will advance digits rapidly.
Press ‘A’ to exit the set date.
Press ‘B’ three times to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

From Time Telling Mode, press and hold ‘A’. Seconds flash. Press ‘D’ to zero out the seconds.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to time.
Press ‘B’. Hours flash. Press ‘D’ to advance the Hour.
NOTE: Pressing and holding ‘D’ will advance digits rapidly.
Press ‘B’ Minutes flash. Press ‘D’ to advance the Minutes.

ACTIVATING ALARM + HOURLY CHIME

While in Alarm Mode, press ‘D’ to deactivate the Alarm and Chime.
Press ‘D’ again to activate the Alarm.
Press ‘D’ again to activate the Chime. The Hourly Chime symbol appears to indicate the Hourly Chime will sound every hour on the hour.
Press ‘D’ again to activate the Alarm and Chime.
Press ‘B’ three times to return to Time Telling Mode.

DUAL TIME ZONE

From Time Telling Mode, press ‘B’ three times to enter the Second Time Zone Mode.
Press ‘A’ Hours flash. Press ‘D’ to advance the Hour.
Press ‘ B’ Minutes flash. Press ‘D’ to adjust the Minutes.
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode.
NOTE: Second Time Zone Clock may be used to keep track of a foreign time.

EL LIGHT FEATURE

Press ‘C’ or the ‘EL’ button in any mode to illuminate the watch face. The backlight will remain lit for 3 seconds.
NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.

CHANGING THE BATTERY

WATER RESISTANCE

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

RETURN YOUR WATCH FOR SERVICING

Please call (718) 482-4195 for a listing of all approved and authorized service centers and locations, or visit our website at: WWW.ARMITRON.COM
YOUR WATCH SHOULD NOT BE RETURNED TO THE PLACE OF PURCHASE. Carefully pack your watch in a sturdy box (do not send in a gift box for same will not be returned) and mail to the nearest approved authorized service station. Because of possible loss, we recommend that you insure the watch, return receipt requested, when using the mail. If you do not receive a receipt within a reasonable time, start a tracer through the originating post office. Never include a special watch band or any other article of personal value in your shipment.

Armitron ANALOG Watches User Manual

ItsManual — Mon, 21 Nov 2022 16:19:05 +0000

ANALOG

INSTRUCTIONS MANUAL

ANALOG WATCH INSTRUCTIONS

SETTING THE WATCH

These instructions apply to a variety of watch styles. To change the time, day, or date on your analog watch simply follow the accompanying instructions according to your specific style.
A. NEUTRAL POSITION: This is the normal operating position of the watch in which the crown is free to turn in either direction without any affect on the time.
B. POSITION TO SET THE DATE: (for watches with date windows)
C. POSITION TO SET THE TIME

SETTING THE TIME ON STANDARD ANALOG WATCH STYLES

NOTE: The standard style has no calendar or day/date windows on the dial and, unlike the diagram, has only 2 crown positions: A (closed) and C (open).To change the time, pull the crown out all the way until it stops (position C). Rotate the crown in either direction until desire time is obtained. Next, push the crown all the way back to position A to re-engage timekeeping. (If watch has a second hand, it will begin to move.) SETTING THE TIME ON CALENDAR & DAY/DATE WATCH STYLES For time setting: Follow the above instructions.

SETTING THE TIME ON CALENDAR WATCHES

If your watch has a date window only, pull the crown out to position B (see diagram) and turn the crown in either a clockwise or counter clockwise direction (depending on watch style). Continue to rotate crown until desired date is obtained. Push the crown all the way back to position A to re-engage timekeeping.

SETTING THE DAY/DATE

If your watch has a date window only, pull the crown out to position B (see diagram). Rotate in either a clockwise or counter-clockwise direction (depending on watch style) to change the day or the date. Each turn of the crown will advance the day or date respectively. If the day does not advance using this method, pull the crown to position C and rotate until the time advances each 24 hour period. Continue to rotate the crown until desired day is obtained. After the correct time has been set, push the crown all the way back to position A to re-engage timekeeping. NOTE: During normal timekeeping (watch running with crown in position A) the day and/ or date will advance between the hours of 11pm and 5am. Please keep this in mind when setting the watch.

THE SOLAR COLLECTION

SOLAR POWER FEATURES

This solar powered watch contains a solar cell underneath the dial which converts light into “electrical energy” and stores the power in a secondary battery. Unlike conventional quartz watches, battery replacement is not necessary. Do not replace the rechargeable battery with a different kind of battery.

OPERATING TIME

With a full charge, the watch will operate for approximately 4 months.

POWER DEPLETION WARNING FUNCTION

When the energy stored in the secondary battery is reduced to an extremely low level, the Second Hand will move at 2 second intervals instead of 1 second intervals. Recharge the watch as soon as possible by exposing the watch to light.

ANALOG WATCH STYLES WITH SUBDIAL

FEATURES

Hours, Minutes, and Seconds
Days of the week, date, and 24 Hour Military Time subdials
Water Resistant as indicated on the watch

SETTING THE TIME, DAY & DATE ON MULTI-FUNCTION MODELS

TO ADVANCE THE HOURS AND MINUTES
Pull the crown out to position 3 when the second hand reaches the 12 o’clock position. The second hand should stop at the 12 o’clock position. Next, turn the crown clockwise to advance the hour and minute hands to the desired time. When setting the minute hand, put in 5 minutes later than the time to be set and turn it back to the correct time. NOTE: that the 24 hour military sub dial time zone also changes at the time of setting. Make sure that the 24 hour military time zone corresponds to the correct AM/PM time. Push the crown all the way back to position 1 when the desired time is obtained.

TO ADVANCE THE DAY

Pull the crown out to position 3 and turn clockwise. Each full 24 hour turn will advance the day zone by one full day. Make sure that you then set the correct time worth the corresponding 24 hour military time. Push the crown all the way back to positions 1 when desired day and time is obtained.

TO ADVANCE THE DATE

Pull the crown out to position 2. Rotate the crown counterclockwise to advance the date. Push the crown all the way back to position 1 when desired date is obtained. Do not set the date between 9PM and midnight as it will not change correctly.

THE AUTOMATIC COLLECTION

The Automatic Self-Winding mechanical Watch (since it is not operating by the battery) must be wound at least six or seven times before you wear it. After that, your daily activity should wind the watch sufficiently to keep it running at night when it is not being worn. If your normal daily activity is not sufficient, the occasional supplementary manual winding may be necessary. It is suggested that your mechanical watch be cleaned and oiled periodically to ensure optimum performance. As this is a mechanical watch, quartz watch accuracy cannot be expected.

ADJUSTING THE TIME

Pull the crown from position 1 to position 2, wind it clockwise or counter clockwise until it shows the desired time. After setting the time, push the crown back to position.

CHANGING THE BATTERY

WATER RESISTANCE

ACCELERATING ENERGY OF THE WATCH

Wind the crown clockwise at position 1 until energy is conserved.

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

If your watch requires cleaning, lubrication, battery changing, or needs a crystal replaced, Armitron Adventure-approved Service Centers are available in your area. These repair facilities use Armitron Adventure parts and components to assure quality and future performance. Free estimates are available in advance, should you need servicing or repairs not covered under the warranty. Repairs covered under the warranty may require proof of purchase, so retain the purchase receipt.

RETURN YOUR WATCH FOR SERVICING

Please call (718) 482-4195 for a listing of all approved and authorized service centers and locations, or visit our website at: WWW.ARMITRON.COM
YOUR WATCH SHOULD NOT BE RETURNED TO THE PLACE OF PURCHASE. Carefully pack your watch in a sturdy box (do not send in a gift box for same will not be returned) and mail it to the nearest approved authorized service station. Because of possible loss, we recommend that you insure the watch, return the receipt requested, when using the mail. If you do not receive a receipt within a reasonable time, start a tracer through the originating post office. Never include a special watch band or any other article of personal value in your shipment.

Armitron Watch IW-YP12585-2 User Manual

ItsManual — Sun, 20 Nov 2022 14:26:58 +0000

IW-YP12585-2 INSTRUCTIONS MANUAL

FEATURES

Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the Week)
24 Hour Alarms
Hourly Chime
Calendar Mode
Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a second with Lap Operation
Water Resistant as indicated on the watch
INSTALLED – Electro Luminescent Display
NOTE: Please note that your watch may have a different outlook on the display than this diagram. However, the functions and operations are the same as these instructions.

SELECTING FEATURES

Time Telling Mode displays Hours, Minutes, Seconds, and Day of the Week.
From Time Telling Mode, press ‘B’ once. Chronograph Mode appears.
Press ‘B’ three times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’ twice to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ three times. Time Setting Mode appears. Press ‘B’ once to return to Time Telling Mode.
From Time Telling Mode, press and hold ‘C’ to enter Calendar Mode. The Month, Date, and Day of the Week appear. Release ‘C’ to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

From Time Telling Mode, press ‘B’ three times. Seconds flash. Press ‘C’ to zero out the Seconds.
Press ‘A’. Minutes flash. Press ‘C’ to advance the Minutes.
Press ‘A’. Hours flash. Press ‘C’ to advance the Hour.
NOTE: Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour Format is selected, ‘A’ indicates ‘a.m.’ times; ‘P’ indicates ‘p.m.’ times.
Press ‘A’. The Date flashes. Press ‘C’ to advance the Date.
Press ‘A’. The Month flashes. Press ‘C’ to advance the Month.
Press ‘A’. The Day of the Week flashes. Press ‘C’ to advance the Day of the Week.
Press ‘B’ to end set sequence and return to Time Telling Mode.

STOPWATCH

From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode.
Press ‘C’ to start timing.
Press ‘C’ again to stop timing.
Press ‘A’ to reset to zero.
Press ‘B’ to return to Time Telling Mode.

SPLIT TIME

While in the Stopwatch Mode, press ‘C’ to start timing.
Press ‘A’ to measure and display Split Times.
Press ‘C’ to stop timing at the end of the event.
Press ‘A’ to reveal the final Split Time.
Press ‘A’ to reset to zero.
Press ‘B’ to return to Time Telling Mode.

SETTING THE 24 HOUR ALARMS

From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode. Alarm Hours flash.
Press ‘C’ to advance the Alarm Hour.
NOTE: Pressing and holding ‘C’ will advance digits rapidly.
Press ‘A’. Alarm Minutes flash. Press ‘C’ to advance the Alarm Minute.
Press ‘B’ to end set sequence and return to Time Telling Mode.

ACTIVATING ALARM + HOURLY CHIME

From Time Telling Mode, press and hold ‘A’ and press ‘C’ once. The Alarm Symbol appears to indicate that the Alarm is activated and will sound at the preset Alarm Time for about 60 seconds or until ‘A’ is pressed.
Press and hold ‘A’ and press ‘C’ once again to deactivate the Alarm.
From Time Telling Mode, press and hold ‘A’ and press ‘B’ once. All of the Days of the Week appear to indicate that the Hourly Chime is activated and will sound every hour on the hour.
Press and hold ‘A’ and press ‘B’ once again to deactivate the Hourly Chime.
SNOOZE: Press ‘D’ to stop the Alarm for 5 minutes. The Alarm sound will resume after 5 minutes. Press ‘D’ again to stop the Alarm for another 5 minutes.
Press ‘A’ and ‘C’ again to deactivate the Alarm.

EL LIGHT FEATURE

Press ‘D’ in any mode to illuminate the watch face. The backlight will remain lit for 3 seconds.
NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.

CHANGING THE BATTERY

WATER RESISTANCE

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

RETURN YOUR WATCH FOR SERVICING

Armitron Watch M1090 Manual

ItsManual — Fri, 17 Feb 2023 13:20:12 +0000

M1090

INSTRUCTIONS MANUAL

FEATURES

Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the Week)
Calendar Mode (Month, Date, and Day of the Week)
(3) 24 Hour Daily and Weekly Alarms
Hourly Chime: One ‘Beep’ sound every full Hour
Chronograph Mode: Hours, Minutes, Seconds and 1/100 of a Second with Lap Operation
Countdown Timer
Second Time Zone
12/24 Hour (Military Time)
Water Resistant as indicated on the watch
INSTALITE — Electro Luminescent Display

EL LIGHT FEATURE

Press ’13’ in any mode to illuminate the watch face. The backlight will remain lit for 3 seconds. NOTE: Excessive use of the light will shorten battery life.

SELECTING FEATURES

Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week.
From Time Telling Mode, press and hold ‘C! Calendar Mode appears and the Month, Date, and Day of the Week are displayed. Release ‘C’ to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ once. Chronograph appears. Presst’ four times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’ three times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ three times. Countdown Timer Mode appears. Press ‘B’ twice to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ four times. Second Time Zone Mode appears. Press ‘B’ once to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

From Time Telling Mode, press and hold ‘A’. Seconds flash. Press ‘C’ to zero out the Seconds. NOTE: Zeroing out 30 or more seconds automatically adds one minute to time.
Press ‘FE Hours flash. Press ‘C’ to advance the Hour. NOTE: Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour Format is selected, ‘PM’ indicates ‘p.m.’ times; there is no indicator for ‘a.m.’ times.
Press ‘W. Minutes flash. Press ‘C’ to advance the Minutes.
Press ‘W. Months flash. Press ‘C’ to advance the Months.
Press ‘W The Date flashes. Press ‘C’ to advance the Date.
Press ‘W. The Day flashes. Press ‘C’ to advance the Day.
Press ‘B’ 12/24 Hour Time Format flashes. Press ‘C’ to select either 12 Hour Time or 24 Hour (Military) Time. NOTE: ‘121 indicates 12 Hour Format; ’24’ indicates 24 Hour (Military Time).
Press ‘A’ to end sequence and return to Time Telling Mode.

STOPWATCH

From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode. 2. Press ‘C’ to start timing. 3. Press ‘C’ again to stop timing. 4. Press ‘A’ to reset to zero. 5. Press ‘B’ to return to Time Telling Mode.

SPLIT TIME

While in the Stopwatch Mode, press ‘C’ to start timing 2. Press ‘A’ to measure and display Split Times. 3. Press ‘C’ to stop timing at the end of the event. 4. Press ‘A’ to reveal the final Split Time. 5. Press ‘A’ again to reset to zero. 6. Press ‘B’ to return to Time Telling Mode.

ACTIVATING ALARM + HOURLY CHIME

While in Alarm Mode, press ‘A’ to select the Alarm (A1-A3), Hourly Chime (CH), and “Beep” sound (BP).
Press ‘C’ to activate or deactivate the selected Alarm, Hourly Chime, or “Beep” sound.
NOTE: The Alarm or Chime Symbols appear when the Alarm and Hourly Chime are activated. “ON” indicates that the “Beep” will sound. When the Alarm is activated, the selected Alarm will sound at the preset Alarm Time for 20 seconds or until any button is pressed. When the Hourly Chime is activated, the Hourly Chime will sound with one “Beep” every hour on the hour.
Press ‘B’ to return to Time Telling Mode.

SETTING THE 24 HOUR ALARMS

From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode.
Press and hold ‘A’. The Alarm Number flashes. Press ‘C’ to select the Alarm Number (Al-A3).
Press ‘B: Alarm Hours flash. Press ‘C’ to adjust the Hours.
Press 1: Alarm Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘W. Normal Time/Dual Time Alarms flash. Press ‘C’ to select either Normal Time (Ti) or Dual Time (T2) Alarm.
Press ‘B: Daily or Weekly Alarms flash. Press ‘C’ to select either the Daily (DA) or the Weekly (WE) Alarm. If the Weekly Alarm is selected, press ‘B’ then press ‘C’ to select the Day of the Week.
Press ‘B; then press ‘C’ to activate or deactivate the selected Alarm.
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode.

SECOND TIME ZONE

From Time Telling Mode, press ‘B’ four times to enter the Second Time Zone Mode.
Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode. NOTE: The Second Time (Second Time Zone) Clock may be used to keep track of a foreign time.

COUNTDOWN TIMER

From Time Telling Mode, press ‘B’ three times to enter the Timer Mode.
Press and hold ‘A’ Hours flash. Press ‘C’ to adjust the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
When the Countdown Timer is set, press ‘A’ to end set sequence and return to Timer Mode.
Press ‘C’ to start the Countdown Timer.
If desired, press ‘C’ again to stop the Countdown Timer. Press ‘C’ again to resume the Countdown Timer.
NOTE: The Countdown timing will continue in any mode until ‘C’ is pressed. When the Timer has expired, the alarm will sound for about 10 seconds or until any button is pressed. 8. Press ‘C’ to stop the Timer. 9. Press ‘B’ to return to Time Telling Mode.

CHANGING THE BATTERY

WATER RESISTANCE

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

RETURN YOUR WATCH FOR SERVICING

Armitron M0901 Series Watch Manual

ItsManual — Tue, 28 Mar 2023 09:33:29 +0000

M0901

INSTRUCTIONS MANUAL

FEATURES

Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the Week)
Calendar Mode (Month, Date, and Day of the Week)
(2) 24 Hour Daily and Weekly Alarms
Hourly Chime: One ‘Beep’ sound every full Hour
Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a second with Lap Operation
Countdown Timer
Second Time Zone
12/24 Hour (Military Time)
Water Resistant as indicated on the watch
INSTALITE – Electro Luminescent Display

SELECTING FEATURES

Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week.
From Time Telling Mode, press and hold ‘C’. Calendar Mode appears and the Month, Date, and Day of the Week are displayed. Release ‘C’ to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ once. Chronograph appears. Press ’B’ four times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’ three times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ three times. Countdown Timer Mode appears. Press ‘B’ twice to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ four times. Dual Time Zone Mode appears. Press ‘B’ once to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

From Time Telling Mode, press and hold ‘A’. Seconds flash. Press ‘C’ to zero out the Seconds.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to time.
Press ‘B’. Hours flash. Press ‘C’ to advance the Hour.
NOTE: Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour Format is selected, ‘PM’ indicates ‘p.m.’ times; there is no indicator for
‘a.m.’times.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
Press ‘B’. Months flash. Press ‘C’ to advance the Months.
Press ‘B’. The Date flashes. Press ‘C’ to advance the Date.
Press ‘B’. The Day flashes. Press ‘C’ to advance the Day.
Press ‘B’. 12/24 Hour Time Format flashes. Press ‘C’ to select either 12 Hour Time or 24 Hour (Military) Time.
NOTE: ‘12’ indicates 12 Hour Format; ‘24’ indicates 24 Hour (Military Time).
Press ‘A’ to end sequence and return to Time Telling Mode.

SETTING THE 24 HOUR ALARM

From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode.
Press and hold ‘A’. Alarm Hours flash. Press ‘C’ to advance the Alarm Hour.
Press ‘B’. Alarm Minutes flash. Press ‘C’ to advance the Alarm Minute.
NOTE: Pressing and holding ‘C’ will advance digits rapidly.
Press ‘B’. Alarm Number flashes. Press ‘C’ to select either Alarm One (t1) or Alarm Two (t2).
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode.

DUAL TIME ZONE

From Time Telling Mode, press ‘B’ four times to enter the Second Time Zone Mode.
Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode.
NOTE: The Dual Time (Second Time lone) Clock may be used to keep track of a foreign time.

ACTIVATING ALARM + HOURLY CHIME

While in Alarm Mode, press ‘C’ to activate the Alarm. The Alarm Symbol appears to indicate the Alarm will sound at the preset Alarm Time for about 60 seconds or until any button is pressed.
Press ‘C’ again to activate both the Alarm and the Hourly Chime. The Hourly Chime Symbol appears to indicate the Hourly Chi me will sound every hour on the hour.
Press ‘C’ again to deactivate the Alarm.
Press ‘C’ again to deactivate the Hourly Chime.
Press ‘B’ to return to Time Telling Mode.

STOPWATCH

From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode.
Press ‘C’ to start timing.
Press ‘C’ again to stop timing.
Press ‘A’ to reset to zero.
Press ‘B’ to return to Time Telling Mode.

SPLIT TIME

While in the Stopwatch Mode, press ‘C’ to start timing.
Press ‘A’ to measure and display Split Times.
Press ‘C’ to stop timing at the end of the event.
Press ‘A’ to reveal the final Split Time.
Press ‘A’ again to reset to zero.
Press ‘B’ to return to Time Telling Mode.

COUNTDOWN TIMER

From Time Telling Mode, press ‘B’ three times to enter the Timer Mode.
Press and hold ‘A’. Hours flash. Press ‘C’ to adjust the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
When the Countdown Timer is set, press ‘A’ to end set sequence and return to Timer Mode.
Press ‘C’ to start the Countdown Timer.
If desired, press ‘C’ again to stop the Countdown Timer. Press ‘C’ again to resume the Countdown Timer.
NOTE: The Countdown timing will continue in any mode until ‘C’ is pressed. When the Timer has expired, the alarm will sound tor about 60 seconds or until any button is pressed.
Press ‘C’ to stop the Timer.
Press ‘B’ to return to Time Telling Mode.

EL LIGHT FEATURE

Press ‘D’ in any mode to illuminate the watch face. The backlight will remain lit for 2 to 3 seconds.
NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.

CHANGING THE BATTERY

WATER RESISTANCE

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

RETURN YOUR WATCH FOR SERVICING

Armitron M833 Series Watch Manual

ItsManual — Sat, 01 Apr 2023 10:29:51 +0000

M833

INSTRUCTIONS MANUAL

FEATURES

Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the Week)
Calendar Mode (Month, Date, and Day of the Week)
(2) 24 Hour Alarms
Hourly Chime: One ‘Beep’ sound every full Hour
Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a second with Lap Operation
Countdown Timer
Second Time Zone
12/24 Hour (Military Time)
Water Resistant as indicated on the watch
INSTALITE – Electro Luminescent Display

SELECTING FEATURES

Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week.
From Time Telling Mode, press and hold ‘C’. Calendar Mode appears and the Month, Date, and Day of the Week are displayed. Release ‘C’ to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ once. Chronograph appears. Press ‘B’ four times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’ three times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ three times. Countdown Timer Mode appears. Press ‘B’ twice to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ four times. Second Time Zone Mode appears. Press ‘B’ twice to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

From Time Telling Mode, press and hold ‘A’ for two to three seconds. Seconds flash. Press ‘C’ to zero out the Seconds.
Press ‘B’. Hours flash. Press ‘C’ to advance the Hour.
NOTE: Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour Format is selected, ‘PM’ indicates ‘p.m.’ times; there is no indicator for ‘a.m.’ times.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minute.
Press ‘B’. The Month flashes. Press ‘C’ to advance the Month.
Press ‘B’. The Date Flashes. Press ‘C’ to advance the Date.
Press ‘B’. The Day of the Week flashes. Press ‘C’ to advance the Day of the Week.
Press ‘B’. 24/7 Hour Time Format flashes. Press ‘C’ to select either 12 Hour Time or 24 Hour (Military) Time.
NOTE: ‘PM’ indicates ‘p/m/’ times in 12 Hour Format; there is no indicator for ‘a.m.’ times. ‘24H’ indicates 24 Hour (Military Time).
Press ‘A’ to end set sequences and return to Time Telling Mode.

CHRONOGRAPH

From Time Telling Mode, press ‘B’ to enter Chronograph Mode.
Press ‘C’ to start timing.
Press ‘C’ again to stop timing.
Press ‘A’ to reset to zero.
Press ‘B’ to return to Time Telling Mode.

LAP OPERATION

While in the Chronograph Mode, press ‘C’ to start timing.
Press ‘A’ to measure Laps.
Press ‘C’ to stop timing at the end of the event.
Press ‘A’ to reveal the final Lap Time.
Press ‘A’ again to reset to zero.
Press ‘B’ to return to Time Telling Mode.

SETTING THE 24 HOUR ALARM

From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode
Press and hold ‘ A’. Alarm Hours flash. Press ‘C’ to advance the Alarm Hour.
Press ‘B’. Alarm Minutes flash. Press ‘C ’ to advance the Alarm Minute.
NOTE: Pressing and holding ‘C’ will advance digits rapidly.
Press ‘B’. Alarm Number flashes. Press ‘C’ to select either Alarm One (t1) or Alarm Two (t2).
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode

SECOND TIME ZONE

From Time Telling Mode, press ‘B’ four times to enter the Second Time Zone Mode.
Press and hold ‘A’ for two or three seconds. Hours flash. Press ‘C’ to advance the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode.
NOTE: The Second Time Zone (Dual Time) Clock may be used to keep track of a foreign time.

COUNTDOWN TIMER

From Time Telling Mode, press ‘B’ three times to enter the Timer Mode.
Press and hold ‘A’ of two or three seconds. Hours flash. Press ‘C’ to adjust the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
Press ‘B’. Seconds flash. Press ‘C’ to advance the Seconds.
When the Countdown Timer is set, press ‘A’ to end set sequence and return to Timer Mode.
Press ‘C’ to start the Countdown Timer.
If desired, press ‘C’ again to stop the Countdown Timer. Press ‘C’ again to resume the Countdown Timer.
NOTE: The Countdown timing will continue in any mode until ‘C’ is pressed. When the Timer counts down below three minutes, an alarm (‘Beep Beep’) will sound when the Seconds Digit is ‘0’ or ‘30’. When the Timer counts down below ten seconds an alarm (‘Beep’) will sound every second. When the Tim has expired, the alarm (‘Beep Beep Beep’) will sound for ten seconds or until ‘A’, ‘B’ or ‘C’ is pressed.
Press ‘C’ to stop the Timer.
Press ‘B’ to return to Time Telling Mode.

EL LIGHT FEATURE

Press ‘D’ in any mode to illuminate the watch face. The backlight will remain lit for 2 to 3 seconds.
NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.

CHANGING THE BATTERY

WATER RESISTANCE

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

RETURN YOUR WATCH FOR SERVICING

Armitron M807 2 Series Watch Manual

ItsManual — Sat, 01 Apr 2023 14:49:33 +0000

M807

INSTRUCTIONS MANUAL

FEATURES

Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the Week)
Calendar Mode
24 Hour Alarm(s) with buzzer signal output
Hourly Chime: One ‘Beep’ sound every full Hour
Chronograph Mode: Hours, Minutes, Seconds and 11100 of a Second with Lap Operation
Countdown Timer
Second Time Zone
Water Resistant as indicated on the watch
INSTALITE – Electro Luminescent Display

SELECTING FEATURES

Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week.
From Time Telling Mode, press ‘B’ once. Chronograph Mode appears. Press ’B’ four times to return to Time Telling Mode.
From Time Telling Mode, press ’B’ twice. Alarm Mode appears. Press ’B’ three times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ three times. Countdown Timer Mode appears. Press ’B’ twice to return to Time Telling Mode.
From Time Telling Mode, press ’B’ four times. Second Time Zone Mode appears. Press ’B’ once to return to Time Telling Mode.
From Time Telling Mode, press and hold ‘C’ Calendar Mode appears. Release ’C’ to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

From Time Telling Mode, press and hold ‘A’. Seconds flash. Press ‘C’ to zero out the Seconds.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to time.
Press ‘B’. Hours flash. Press ‘C’ to advance the Hour.
NOTE: Pressing and holding ‘C’ will advance digits rapidly.
Press ‘ B ~ Minutes flash. Press ‘C’ to advance the Minutes.
Press ‘B: Months flash. Press ‘C’ to advance the Month.
Press ‘B: The Date flashes. Press ‘C’ to advance the Date.
Press ‘B: The Day of the Week flashes. Press ‘C’ to advance the Day of the Week
Press ‘B’. 12 Hour or 24 Hour (Military) Time flashes. Press ‘C’ to select either 12 Hour or 24 Hour (Military) Time
Press ‘A’ to end sequence and return to Time Telling Mode.

STOPWATCH

From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode.
Press ‘C’ to start timing.
Press ‘C’ again to stop timing.
Press ‘A’ to reset to zero.
Press ‘B’ to return to Time Telling Mode.

SPLIT TIME

While in the Stopwatch Mode, press ‘C’ to start timing.
Press ‘A’ to measure and display Split Time.
Press ‘C’ to stop timing at the end of the event.
Press ‘A’ to reveal the final Lap Time.
Press ‘A’ to reset to zero.
Press ‘B’ to return to Time Telling Mode.

SETTING THE 24 HOUR ALARMS

From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode.
Press and hold ‘A’. Alarm Hours flash. Press ‘C’ to advance the Alarm Hour.
Press ‘B’ Alarm Minutes flash. Press ‘C’ to advance the Alarm Minute.
NOTE: Pressing and holding ‘C’ will advance digits rapidly.
Press ‘B’ Alarm Number flashes. Press ‘C’ to select either Alarm One (t1) or Alarm Two (t2)
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode.

ACTIVATING ALARM + HOURLY CHIME

While in Alarm Mode, press ‘C’ to activate the Alarm. The Alarm Symbol appears to indicate the Alarm will sound at the preset Alarm Time for about 20 seconds or until any button is pressed.
Press ‘C’ again to activate both the Alarm and z Hourly Chime. The Hourly Chime Symbol appears to indicate the Hourly Chime will sound every hour on the hour.
Press ‘C’ again to deactivate the Alarm.
Press ‘C’ again to deactivate the Hourly Chime
Press ‘B’ to return to Time Telling Mode.

SECOND TIME ZONE

From Time Telling Mode, press ‘B’ four times to enter the Second Time Zone Mode.
Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
Press ‘B’ Minutes flash. Press ‘C’ to advance the Minute.
Press ‘A’ to end set sequence.
Press ‘B’ to return to Time Telling Mode.
NOTE: The Second Time lone (Dual Time) Clock may be used to keep track of a foreign time.

EL LIGHT FEATURE

Press ‘D’ or ‘EL’ in any mode to illuminate the watch face. The backlight will remain lit for 3 seconds.
NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.

COUNTDOWN TIMER

From Time Telling Mode, press ‘B’ three times to enter the Timer Mode.
Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
Press ‘B’. Seconds flash. Press ‘C’ to advance the Seconds.
When the Countdown Timer is set, press ‘A’ to end set sequence and return to Countdown Timer Mode.
Press ‘C’ to start the Countdown Timer.
If desired, press ‘C’ again to stop the Countdown Timer.
NOTE: The Countdown timing will continue in any mode until ‘C’ is pressed. 11”11en the Timer has expired, the alarm will sound for about 10 seconds or until any button is pressed.
Press ‘C’ to stop the Timer.
Press ‘B’ to return to Time Telling Mode.

CHANGING THE BATTERY

WATER RESISTANCE

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

RETURN YOUR WATCH FOR SERVICING

Please call (718) 482-4195 for a listing of all approved and authorized service centers and locations, or visit our website at: WWW.ARMITRON.COM
YOUR WATCH SHOULD NOT BE RETURNED TO THE PLACE OF PURCHASE. Carefully pack your watch in a sturdy box (do not send in a gift box for same will not be returned) and mail to the nearest approved authorized service station. Because of possible loss, we recommend that you insure the watch, return the receipt requested, when using the mail. If you do not receive a receipt within a reasonable time, start a tracer through the originating post office. Never include a special watch band or any other article of personal value in your shipment.

Armitron ADVENTURE MD16388 Series Watch Manual

ItsManual — Fri, 28 Apr 2023 04:54:11 +0000

MD16388

LIMITED LIFETIME WARRANTY & INSTRUCTIONS MANUAL

FEATURES

Time Telling Mode (Hours, Minutes, Seconds, Month, Date, and Day of the Week)
(5) 24 Hour Alarms
Hourly Chime: One ‘Beep’ sound every full Hour
Chronograph: Hours, Minutes, Seconds, and 1/100 of a Second with Lap Operation
Countdown Timer
World Time
Daylight Savings Time
Pedometer
12/24 Hour (Military Time)
Water Resistant as indicated on the watch
INSTALITE- Electro Luminescent Display

EL LIGHT FEATURE

Press ‘D’ in any mode to illuminate the watch face. The backlight will remain lit for 3 seconds.
NOTE: Excessive use of the light will shorten battery life.

SELECTING FEATURES

Time Telling Mode displays Hours, Minutes, Seconds, Month, Date, and Day of the Week.
From Time Telling Mode, press ‘B’ once. Pedometer Mode appears. Press ‘B’ six times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ twice. Recall Pedometer Data Mode appears. Press ‘B’ five times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ three times. Alarm Mode appears. Press ‘B’ four times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ four times. Chronograph Mode appears. Press ‘B’ three times to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ five limes. Countdown Timer Mode appears. Press ‘B’ twice to return to Time Telling Mode.
From Time Telling Mode, press ‘B’ six times. World Time Mode appears. Press ‘B’ once to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

From Time Telling Mode, press and hold ‘A’ until the City Code flashes. Press ‘C’ to select the City Code.
Press ‘B’. Daylight Savings Time flashes. Press ‘C’ to activate or deactivate Daylight Savings Time.
NOTE: The Daylight Savings Time symbol appears when the Daylight Savings Time is in effect.
Press ‘B’. Seconds flash. Press ‘C’ to zero out the Seconds.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to time.
Press ‘B’. Hours flash. Press ‘C’ to advance the Hours.
NOTE: When 12 Hour Format is selected, ‘AM’ indicates ‘a.m.’ times; ‘PM’ indicates ‘p.m.’ times.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
NOTE: Pressing and holding ‘C’ will advance digits rapidly.
Press ‘B’. 12/24 Hour Time Format flashes. Press ‘C’ to select either 12 Hour or 24 Hour (Military) Time.
NOTE: ‘12’ indicates 12 Hour Format; ‘24’ indicates 24 Hour (Military Time).
Press ‘B’. The Year flashes. Press ‘C’ to advance the Year.
Press ‘B’. Months flash. Press ‘C’ to advance the Month.
Press ‘B’. The Date flashes. Press ‘C’ to advance the Date.
Press ‘B’. The Unit flashes. Press ‘C’ to select the Unit (Inches or Centimeters).
Press ‘A’ to end sequence and return to Time Telling Mode.

STOPWATCH

From Time Telling Mode, press ‘II’ four times to enter the Stopwatch Mode.
Press ‘C’ to start timing.
Press ‘C’ again to stop timing.
Press ‘A’ to reset to zero.
Press ‘B’ three times to return to Time Telling Mode.

SETTING THE 24 HOUR ALARMS

From Time Telling Mode, press ‘B’ three times to enter the Alarm Mode. Press ‘A: then press ‘B’ to select the Alarm Number (Al-A5).
Press and hold ‘A’ until the Alarm Hours flash. Press ‘C’ to advance the Alarm Hours.
Press ‘B’. Alarm Minutes flash. Press ‘C’ to advance the Alarm Minutes.
Press ‘A’ to the end sequence.
Press ‘A’ again, then press ‘B’ four times to return to Time Telling Mode.

SPLIT TIME

While in the Stopwatch Mode, press ‘C’ to start timing.
Press ‘A’ to measure and display Split Times.
Press ‘C’ to stop timing at the end of the event and to reveal the final Split Time.
Press ‘A’ to reset to zero.
Press ‘B’ three times to return to Time Telling Mode.

WORLD TIME

From Time Telling Mode, press ‘B’ six times to enter the World Time Mode
Press ‘C’ to select the desired city. Based on the set time, the Hour is automatically adjusted to display the local time in the newly selected city.
NOTE: One of 28 major cities may be selected: (PPG) Samoa, (HNL) Honolulu, (ANC) Anchorage, (LAX) Los Angeles, (DEN) Denver, (CHI) Chicago, (NYC) New York, (CCS) Caracas, (RIO) Rio de Janeiro, (LON) London, (PAR) Paris, ( JRS) Jerusalem, (GAl) Cairo, (JED) Jeddah, (THR) Tehran, (DXB) Dubai, (KBL) Kabul, (KHI) Karachi, (DEL) Delhi, (DAC) Dacca, (RGN) Yangon, (BKK) Bangkok, (HKG) Hong Kong, (TYO) Tokyo, (ADL) Adelaide. (SYD) Sydney, (NOU) Noumea, (WLG) Wellington.
Press ‘B’ to return to Time Telling Mode.

COUNTDOWN TIMER

From Time Telling Mode, press ‘B’ five times to enter the Timer Mode.
Press and hold ‘A’ until the Hours flash. Press ‘C’ to adjust the Hour.
Press ‘B’. Minutes flash. Press ‘C’ to adjust Minutes.
Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
When the Countdown Timer is set, press ‘A’ to end set sequence and return to Timer Mode.
Press ‘C’ to start the Countdown Timer.
If desired, press ‘C’ again to stop the Countdown Timer. Press ‘C’ again to resume the Countdown Timer.
NOTE: The Countdown timing will continue in any made until ‘C’ is pressed. When the timer has expired, the alarm will sound for about 10 seconds or until any button is pressed.
Press ‘C’ to stop the Timer.
Press ‘B’ twice to return to Time Telling Mode.

ACTIVATING ALARM + HOURLY CHIME

While in the Alarm Mode, press ‘A’, then press ‘B’ to select the Alarm Number (Al-A5). Press ‘C’ to activate the selected Alarm. The Alarm Symbol appears to indicate that the selected Alarm will sound at the preset Alarm Time.
Press ‘C’ again to deactivate the selected Alarm.
Press ‘B’ to select the Hourly Chime (CHM). Press ‘C’ to activate the Hourly Chime. The Hourly Chime Symbol appears to indicate that the Hourly Chime is activated.
Press ‘C’ again to deactivate the Hourly Chime.
Press ‘A’, then press ‘B’ four times to return to Time Telling Mode.
NOTE: When an Alarm is activated, the selected Alarm will sound at the preset Alarm Time for 10 seconds or until any button is pressed. When the Hourly Chime is activated, the Hourly Chime will sound with one “Beep” every hour on the hour.

PEDOMETER

NOTE: The Pedometer can record and display the number of steps that you have walked, the number of calories that you have burned, the distance that you have travelled, and the walking or running time. When the preset Pedometer Step Goal is reached, the watch will beep for about 10 seconds and “GOAL:’ will flash. Press any button to stop the notification.

From Time Telling Mode, press ‘B’ once to enter the Pedometer Mode.
Press ‘C’ to turn the Pedometer On or Off.

SELECTING THE TYPE OF PEDOMETER

While in the Pedometer Mode with the Pedometer On, press and hold ‘C’ to select the type of pedometer (Walking or Running).

SETTING THE PEDOMETER

PARAMETER SETTING RANGE

Goal of Step Range: 100-900,000(5) 24 Hour Alarms
Height Range: 90-22lcm; 35-87 inches
Weight Range: 20-200 kg; 44-440 lbs
Distance of Walk & Run: 10-180cm; 4-71 inches

While in the Pedometer Mode, press and hold ‘A’ to set the Pedometer Goal. Steps flash. Press ‘C’ to select the desired number of Steps.
Press ‘B’. Height flashes. Press ‘C’ to select the desired Height.
Press ‘B’. Weight flashes. Press ‘C’ to select the desired Weight
Press ‘B’. The Distance of Walk flashes. Press ‘C’ to select the desired Walk Distance.
Press ‘B’. The Distance of Run flashes. Press ‘C’ to select the desired Run Distance.
Press ‘B’. Power Save flashes. Press ‘C’ to activate or deactivate the Power Save.
NOTE: When the Power Save is activated, the Pedometer will turn off automatically when the Date updates. If the Power Save is not activated, more power will be consumed which will shorten battery fife.
Press ‘A’ to end sequence.
Press ‘B’ six times to return to Time Telling Mode.

RECALLING THE PEDOMETER DATA

From Time Telling Mode, press ‘B’ twice to enter the Recall Pedometer Data Mode.
Press ‘A’ to enter Data Browse.
Press ‘B’ to select the desired data in the following sequence: Steps, Distance, Calories, Time of Walking or Running.
Press ‘A’ to exit Data Browse.
Press ‘B’ five times to return to Time Telling Mode.

CHANGING THE BATTERY

WATER RESISTANCE

This is a WATER RESISTANT watch. Do not operate push buttons below the surface of the water. Should water or condensation appear in the watch, immediately have the watch checked? Water can corrode electronic parts inside the case.

USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.

RETURN YOUR WATCH FOR SERVICING

LIMITED WARRANTY

This Armitron Adventure Watch is warranted to you, the owner, for your lifetime against all defects in material or workmanship. This warranty does not apply to normal wear and tear or abuse and excludes batteries, case, strap, crystal, or bracelet. In the event of a defect or malfunction of the movement within this period it will be repaired or replaced, at our option, provided that it is returned prepaid with a check or money order for $9.95 to cover the cost of handling and return postage. This charge does not apply to California residents. (This is not a repair charge.) DO NOT SEND CASH. No additional charge will be made unless additional servicing is necessary for reasons beyond our control such as accident, misuse, neglect or replacement of parts not warranted is required such as case, crystal, strap, bracelet or batteries in which event a moderate charge will be made. The movement of any timepiece requires periodic cleaning/timing which is not a defect and, as such not warranted. After one year from the date of purchase each cleaning/timing with be performed as required without charging a fee in excess of the specified $9.95 handling charge. The above remedy is exclusive. Armitron Adventure shall not be liable for any incidental or consequential damages. Should any other part of your watch require repair, please use our Service Center for quick and inexpensive repairs on your watch. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. In the event of a problem with warranty service or performance, you may be able to go to Small Claims Court, a State Court or a Federal District Court. CALIFORNIA RESIDENTS ONLY!! There is no handling charge for in-warranty service. Charges apply only for NON-WARRANTY ITEMS such as cleaning after one year and other routine maintenance.