Loading manuals...

ARTISTE ADH300J 2.4GHz Digital Over-Ear Stereo Headphone for TV Manual

ARTISTE ADH300J 2.4GHz Digital Over-Ear Stereo Headphone for TV Manual Image

ARTISTE ADH300J 2.4GHz Digital Over-Ear Stereo Headphone for TV

FEATURES

  1. 30 Meters Wireless Transmission Range
  2. 15~20 Hours Working Duration
  3. 2.4GHz Digital Wireless Technology
  4. One Transmitter can be connected to Several Headphones

COMPATIBLE WITH VARIOUS DEVICES

OUTPUT JACK OPTIONS

PACKAGE CONTENTS

  1. Wireless Headphone
  2. Transmitter/Charging Base
  3. 3.5mm to 3.5mm Direct Line-In cable
  4. Rechargeable Battery*2 (Installed in Headphone)
  5. AC/DC Adaptor
  6. 3.5mm to RCA Cable
  7. Optical TOSLINK Audio Cable
  8. User Manual

FUNCTION IDENTIFICATION

Wireless Headphone

  • Signal link Green LED Indicator
  • (Solid Green: connected)
  • (Flash: pairing)
  • (Flash Quickly: connect new
  • headphone/reconnect)
  • Power Red LED Indicator
  • (Solid Red: ON)
  • (Light out: OFF)
  • ON/OFF Control (press 2 seconds: ON/OFF)(press 5 seconds when OFF: connect new headphone/reconnect)

Transmitter

  • Charging Green LED Indicator （Solid Green: charging/Light out: fully charged）
  • Signal Red LED Indicator （Solid Red: connect/ Flash: pairing）
  1. 3.5mm Audio IN Socket
  2. Optical TOSLINK Audio IN Socket
  3. DC IN Socket

INSTALLATION AND OPERATION

Optical input (recommended)

Analogue audio input

NOTE:
Please note that only one input (either analogue audio input or optical input/TOSLINK) must be connected. If both the analog audio input and the optical input/TOSLINK are connected, the priority use is analog input.

CHARGING THE BATTERIES
Charge the Batteries for about 7 hours before first use.

Charging Duration: 5~7 Hours

  1. Turn OFF the Headphone.
  2. Retract the Headband.
  3. Place the Headphone on the Transmitter.
  • Charging Green LED Indicator （Solid Green: charging/Light out: fully charged）
  • Signal Red LED Indicator

AUTO-OFF

  • The transmitter will be OFF automatically if there is no audio source signal for around 3 minutes. If the audio source signal returns, the transmitter will automatically switches ON.
  • Headphones will be OFF automatically if there is no audio source signal for around 3 minutes.

Reconnect/Connect more Headphones

  1. Disconnect the power of the Transmitter.
  2. Turn OFF the Headphone. Press ON/OFF control for 5 seconds until the Green LED flashes quickly.
  3. Connect the power of the Transmitter.
  4. Headphones and Transmitter will be connected automatically.

TROUBLESHOOTING

No sound

  • Ensure that the Transmitter power ON.
  • Ensure that the Headphone is ON, Red LED Indicator is in solid red.
  • The charge level of the batteries may be too low. Recharge the Batteries.
  • The audio device is ON and PLAY.
  • The volume of the headphone may be too low, adjust the volume to a moderate level.

The audio signal input level is too low. Increase the volume of the audio device.

Distortion

  • Ensure the volume level of headphones is set to an approximate level.
  • The Headphone is too far from the Transmitter, move it closer.
  • The audio signal input level is too low. Increase the volume of the audio device.

FCC STATEMENT

To protect your hearing, please do not use headphones at high volume for a long time. The wireless transmission will produce an electromagnetic signal which may interfere with the heart pacemaker or other medical instruments’ properly functioning. Please follow your doctor’s instructions.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WARNING:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. The device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC’s radiation exposure limits set forth for an uncontrolled environment

TECHNICAL SPECIFICATIONS

  • Transmission Mode: GFSK
  • Carrier Frequency: 2.4GHz
  • Operating Voltage: Transmitter/Charger DC 5V 550mA Headphone 2*1.2V AAA
  • Frequency Response: 25Hz~20KHz
  • S/N Ratio: ＞70dB
  • Music Time: 15~20 hours
  • Distortion: ＜0.5%
  • Operating Distance: 30 meters
  • Charge Time: 5~7 hours

ABOUT ARTISTE

  • ARTISTE TECHNOLOGY LTD.
  • The 6th Building, No. 173, Dunhe Road, Haizhu District, Guangzhou, Guangdong, China www.artiste-audio.com
  • Tel: 86-20-66319168
  • Made In China