avenli 2-3 Person Inflatable Hot Tub Spa Manual

avenli 2-3 Person Inflatable Hot Tub Spa

Installation and user’s manual

Carefully read, understand, and follow all information in this user manual before installing and using the swimming pool. These warnings, instructions, and safety guidelines address some common risks of water recreation, but they cannot cover all risks and dangers in all cases. Always use caution, common sense, and good judgment when enjoying any water activity. Please read carefully and keep for future reference.

Non Swimmers safety

Continuous, active, and vigilant supervision of weak swimmers and non-swimmers by a com- petite adult is required at all times (remember that children under five are at the highest risk of
drowning)
Designate a competent adult to supervise the pool each time it is being used;
Weak swimmers or non-swimmers should wear personal protection equipment when using the pool;
When the pool is not in use, or unsupervised, remove all toys from the swimming pool and its

Safety devices

It is recommended to install a barrier (and secure all doors and windows, where applicable) to prevent unauthorized access to the swimming pool;
Barriers, pool covers, pool alarms, or similar safety devices are helpful aids, but they are not substi-tutes for continuous and competent adult supervision.

Safe use of the pool

Encourage all users especially children to learn how to swim;
Learn Basic Life Support (Cardiopulmonary Resuscitation – CPR) and refresh this knowledge regu-larly. This can make a life-saving difference in the event of an emergency;
Instruct all pool users, including children, what to do in case of an emergency;
Never dive into any shallow body of water. This can lead to serious injury or death;
Do not use the swimming pool when using alcohol or medication that may impair your ability to safely use the pool;
When pool covers are used, remove them completely from the water surface before entering the pool;
Protect pool occupants from water related illnesses by keeping the pool water treated and practi-cing good hygiene.Consult the water treatment guidelines in the user’s manual;
Store chemicals (e.g. water treatment, cleaning or disinfection products) out of the reach of child-ren.
Use the signage as outlined below;
Removable ladders shall be placed on horizontal surface.When using this electrical equipment, basic safety precautions should always be followed, including the following:
- A green coloured tenminal or a terminal marked G, GR, Ground, Grounding, or the symbol is located inside the supply terminal box or compartment. To reduce the risk of electric shock, this terminal must be connected to the grouneding means provided in the electric supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying this equipment.IEC Publication 417, symbol 5019.
- At least two lugs marked «BINDING LUGS» are provided on the external surface or on the inside of the supply termianl box or compartment. To reduce the risk of electric shock, connect the local common bonding grid in the area of the hot tub or spa to these terminals with an insulated or bare copper conduc-tor not smaller than No.6 AWG.
- All field – installed metal components such as rails, ladders, drains or other similar hardware within 3m of the SPA or hot tub shall be bonded to the equipment grounding bus with copper conductors not smaller than No.6 AWG. To reduce the risk or injury, do not permit children use this product unless they are closely supervised all times.
  A wire connector is provided on this unit to connect a minimum 8 AWG (8.4 mm2) ,6 AWG (13.3mm2) solid copper conductor between this unit and any metal equipment, metal enclosures of electrical equip-ment, metal water pipe, or conduit within 5 feet (1.5 m) of the unit.

WARNING

READ ALL INSTRUCTIONS AND SAFETY WARNINGS IN THIS MANUAL Failure to follow the warnings and instructions in this manual may result in serious injury, drowning or electric shock.
The safety of your children is left on your hand! The risk is the highest for children aged below 5. Be high alert all the time. Always comply with the following instructions:

The children should be under close and constant supervision
Designate one security responsible;
Always designate a responsible person to mange pool and pool area;
Adult supervision should always be relevant to the number of people using the pool;
Wet the nape, chest and legs before entering the water;
Learn the safety gestures and especially the specifics to children;
Prohibit diving and jumping;
Prohibit running, splashing games around the pool;
Do not let an unattended child who does not swim use the pool with no life-jack-ets on;
Do not leave any players around and in the basin unattended;
Always keep the water treatment products out of reach of all children. If incident occurs remove the injured person or child from the pool and pool area Contact emergency services for advice and guidance on how to treat injured per-son or child The hot tub’s electrical connections must be installed in the electrical safety zones labelled 1, 2 or outside all safety zones. The measured zones are limited by walls and fixed partitions.

For your own safety and that of your product, make sure to following the safety precautions below. Failure to follow the instruction may result in serious injury, property damage or death. Improper installation or operation will void the warranty. Read, understand and follow all instructions:
DANGER
Risk of accidental drowning:

Extreme caution must be exercised to prevent unauthorized access by children.
Inspect the spa cover regularly for leak, premature wear and tear, damage or signs of deterioration. Never use a worn or damaged cover: it will not provide the level of protection required to
prevent unsuper-vised access to the spa by a child. Always lock the spa cover after each use.

Risk of injury:

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly quali-fied persons in order to avoid a hazard.
To reduce the risk of electric shock, do not use an extension cord, timers, plug adapters or converter plugs to connect the unit to electric supply; provide a properly located outlet.
The spa electrical appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 10mA.
Parts containing live parts, except parts supplied with safety extra-low voltage not exceeding 12V, must be inaccessible to occupants in the spa.
Parts incorporating electrical components, except remote control devices, must be located or fixed so that they cannot fall into the spa.
Residential electrical connection box must be located safely with a distance of at least 2m away from the spa.
This appliance can be used by children aged from 8 years and above and persons with reduced physi-cal, sensory or mental capabilities or lack of experience and knowledge if they have been given supervi-sion or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
To reduce the risk or injury, do not permit children use this product unless they are closely supervised all times.
To reduce the risk of child drowning, supervise children all times. Attach and lock spa cover after each use.
Make sure the floor is capable of supporting the expected load (≥ 500kg/m²).
Adequate draining system must be provided around the spa to deal with overflow water.
To avoid damage do not leave the appliance empty for an extended period.
To avoid damage to the pump, the spa must never be operated unless the spa is filled with water.
Immediately leave spa if uncomfortable or sleepy.
To reduce the risk of injury :

In order to avoid the possibility of hyperthermia (heat stress) occurring it is recommended that the average temperature of spa-pool water should not exceed 40°C (104°F).

Since excessive water temperatures have a high potential for causing fetal damage during the early months of pregnancy, pregnant or possibly pregnant women should limit spa water temperatures to 38°C (100°F).
Before entering a spa or hot tub the user should measure the water temperature with an accurate ther-mometer since the tolerance of water temperature regulating devices varies.
The use of alcohol, drugs or medication before or during spa use may lead to unconsciousness with the possibility or drowning.
The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia in spas. The causes and symptoms of hyperthermia may be described as follows: Hyperthermia occurs when the internal temperature of body reaches a level several degrees above the normal body temperature 37°C (98.6°F). The symptoms of hyperthermia include an increase in the internal temperature of body, dizziness, lethargy, drowsiness, and fainting. The effect of hyperemia include failure to perceive heat; failure to recognize the need to exit spa; unawareness of impending hazard; fetal damage in pregnant women; physical inability to exit the spa; and unconsciousness resulting in the danger of drowning.- Obese persons or persons with a history of heart disease, low or high blood pressure, circulatory system problem, or diabetes should consult a physician before using a spa.
Persons using medication should consult a physician before using a spa since some medication may induce drowsiness while other medication may affect heart rate, blood pressure and circulation.
Check with doctor before use if pregnant, diabetic, in poor health, or under medical care.
People with infectious disease should not use a spa or hot tub.
To avoid injury exercise care when entering or existing the spa or hot tub.
Water temperature in excess of 40°C (104°F) may be injurious to your health.
Never use a spa or hot tub alone or allow others to use the spa alone.
Do not use a spa or hot tub immediately following strenuous exercise.
Do not put the spa under 0°C (32°F) environment in order to avoid freezing if there is still water in the pool. Do not turn on the spa when the water is frozen.
Never pour water with a temperature higher than 40°C(104°F) into the spa directly. Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the product.
Never jump or dive into a spa or any shallow body of water.
Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and other equipment.
Do not attempt to plug in or unplug this product while standing in water or when your hands are wet. Do not use the spa if damaged in delivery and/or malfunctioning in any way.
Keep all pets away from the spa to avoid any damage.
Do not add bath oil or bath salt to the spa water.
Do not leave an empty pool outside. To prevent resetting of the thermal cut out, this appliance must not be supplied through an external swit-ching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

SPECIFICATIONS

	4 persons	4 persons	6 persons	2+1 persons
	4 persons	4 persons	6 persons
Model	17609XX	17624XX/ 17625XX 17626XX/ 17627XX	17610XX / 17628XX 17629XX / 17630XX	17612XX	EN
Model	17609XX	17624XX/ 17625XX 17626XX/ 17627XX	17610XX / 17628XX 17629XX / 17630XX	17623XX
Capacity	4 persons	4 persons	6 persons	2+1persons
Dimension (outer)	66.1″ × 66.1″ × 27.6″ 168 × 168 × 70 cm	Ø 68.9″ × 27.6″ Ø 175 × 70 cm Ø 65″ × 27.6″ Ø 165 × 70 cm(17624XX)	Ø 80.3″ × 27.6″ Ø 204 × 70 cm	Ø 65″ × 27.6″ Ø 165 × 70 cm
Dimensions (inner)	50.3″ × 50.3″ × 27.5″ 128 × 128 × 70 cm	Ø 53.1″ × 27.5″ Ø 135 × 70 cm	Ø 62.9″ × 27,5″ Ø 160 × 70 cm	Ø 49.2″ × 27.6″ Ø 125 × 70 cm
Water capacity	700 L	800 L	956L	686 L
Power supply	220-240 V,50 Hz,1540W	220-240 V,50 Hz,1540W	220-240 V,50 Hz,1540W	220-240 V,50 Hz,1540W
Max heat temperature	40°C	40°C	40°C	40°C
Test certificate	CE/GS	CE	CE	CE
Heating efficiency Ambient temperature : 20°C	1.5 – 2.5°C/h	1.5 – 2.5°C/h	1.5 – 2.5°C/h	1.5 – 2.5°C/h

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). This symbol indicates
that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal of the appliance shall be carried out in accordance with the local environment regulations for waste disposal.The CE mark indicates that the product complies with European directives in relation to 2014/35/CE (low voltage), 2014/30/CE (Compliance with the Electromagnetic Compatibility), 2011/65/UE (restriction of the use of certain hazardous substances in electrical and electronic equipment), 2009/125/CE

PACKAGE LIST

INSTALLATION

WARNING :
Spa installed on inadequately level surfaces are subject to leaking. forming irregulari-ties or collapses. which can result in properly damage or serious injury for those in or around the spa area!

CAUTION :
Please choose your set-up area carefully as lawn and other desirable vegetation undereath the ground cloth (if applicable) wil die. furthermore, try to avoid setting the ground cloth in areas prone to aggressive plant and weed species, as they may grow trough the ground cloth.

Site selection

A level place in order to avoid any defect, hernia or leakage.
Wide enough to support the pool and its pump unit.
Able to support more than 500 kg/m².
Sheltered from the sun and bad weather.
Clean and free from sharp objects.
Devoid of aggressive vegetation on the ground.
failure to comply with these rules may result in property damage or personal injury.

The RCD plug must be tested before each use.. Do not use if RCD test fails and see chapter.

Insert the plug into the power outlet.
Press the «RESET» button, the indicator light turns red.
Press the «TEST» button, the indicator light turns off.
Press the «RESET» button, the indicator light turns red. The RCD works properly.

The number of persons required for installation: 1 adult at least. 10 minutes for site preparation and water filling.

Assembling

Unfold the inflatable spa over the base protector.(Optional)
Bring the pump unit to the inflatable spa.
Connect the inflation hose to the pump on the socket .
Insert the inflation hose into the inflatable spa
Connect the pump unit then press the button to inflate the spa.
The air flow valve prevents your spa from over-inflating.
inflate the inflatable spa for about 10 minutes. Ensure that the spa is firmly inflated.
Remove the inflation hose and screw the cap firmly in place.
Connect the unit pump to the pool using the 3 connectors to screw. Ensure the icons on the pump and the pool match up
artridge location as shown.
Put the filter cartridge in the support then screw it onto the lower suction inside the basin.
Ensure that the drain caps are properly closed before before filling the spa
Smooth wrinkles out of the bottom of the spa, then fill the spa to the level indicated. Your spa is ready.

USAGE

Functions
Once powered-up, the LED displays the current water temperature automatically. The temperature units selector changes the temperature units from Celsius de-grees to Fahrenheit degrees. Press the temperature adjustment buttons, then the screen will flash. When it is flashing, you can set the desired temperature. The value will increase or decrease 1 degree at once. The temperature could be set between 30°C to 40°C (86°F to 104°F). To lock or unlock the control panel, press the Lock button and hold 3 seconds. Lock the control panel when you are away to prevent other people come to change your settings.. Press the massage button to activate the bubble massage system, the green indicator light turns on. It can be turned off by pressing it again.Press the filter button to activate the water filtration. The green indicator light will turn on when the filtration system is activated.Note: If massage function is on, the filtration can’t be activated. Press the heating button to activate water heating and filtering system at the same time. The green indicator light of filter and red indicator light of heating will turn on at same time The pump does not stop heating until the current water temperature reaches the set temperature; and the heating system will restart after the current water tem-perature drops 2°C below the set temperature automatically.Maximum heating temperature: 40°C (104°F)Important :
After 150 cumulative hours of filtration operations, an audible alarm will sound and the LCD display will show the characters CHG, followed by FIL, to remind you to change or clean the filter. You can hold the filtering button 5 seconds to turn off the buzzing. The filtering system will turn off, you can press the button to active the filtering system again.
Note :

With the heating system staring, the filtration system will start working together.
After turning off the heating system, the filtration system will still work.
If the massage function is active, the filtration and heating functions can not be activated.

Pool cover and security (Optional)
After each use, the control panel must be locked and the pool must be coated with its top cover and it must be attached to the base protector with the safety buckles. Each safety buckles has a lock system ; closed buckle, the latch in up position locks the buckle, the latch in down position unlocks the buckle. The top cover keeps the heat from the water and secures the pool.

MAINTENANCE

The filter cartridge should be regularly cleaned (150 hours max.).
The filter cartridge should be replaced every 1 to 2 months.
The pool water should be changed every 15 to 30 days.
Use a water test kit to control the parameters of the water before using the spa, or at least once a week.
Use disinfection products for the spa. The treatment products should be used with caution and it is imperative to refer to their instructions.
Damage resulting from improper use of treatment products is not covered by warranty (overdose, shock treatment, …).
1. Water balance
  The water balance (pH) must be maintained between 7 and 7.4.
2. Water Sanitation
  To sanitize the pool water, we suggest using an active oxygen-based treatment or bromine placed in a floating dispenser. (Dispenser sold
  separately).

Cleaning and replacing the filter cartridge
A dirty filter cartridge may contaminate the pool water and cause damage to the heating
function.

Unscrew the filter case by turning it counter-clockwise. Take out the filter cartridge from the case.
Rinse off the filter cartridge with a garden hose. If the filter cartridge remains dirty and discoloured, the filter cartridge should be replaced.
Put back the cleaned filter cartridge into his case and screw it to the pool.

Disinfection
Water Sanitation:
To sanitize the pool water, we suggest using an active oxygen-based treatment or bro- mine placed in a floating dispenser. (Dispenser sold separately)If water is heavily polluted you should not use pool.
Clean pool with specialist UV lighting equipment. Seek professional advice and guidance before doing this.

Attention:
Detergent residues and dissolved solids from bathing suits and chemicals may build up on the spa walls, Use soap and water to clean the walls and rinse thoroughly with a garden hose using a direct powerful water spray.

Drainage and storage
Drainage

Check the stopper on the bottom of the pool and the drain cap.
Unscrew the drain cap.
Remove the stopper on the bottom of the pool. Completely drain all water from the spa pool. Once empty, the pool can be cleaned with soap and water.
Storage
Press the bubbling button to blow out the water inside the jet holes. Unplug the pump, remove the filter cartridge from the inner wall of the pool.
Use a towel to wipe off the pool, dry 24 hours.
Unscrew the valves to deflate the pool.
Fold the pool. It is recommended that store the SPA in its original package in a warm dry place.

TROUBLESHOOTING

Problem	Cause	Solution
Control panel screen does not operate	Check power source	Power failure
		Reset the RCD plug / Check if the wiring system is adapted to the power of the pump unit (1540W)
		Call for service if it does not reset
SPA pump does not heat properly	Temperature set is too low	Set to a higher temperature
	Filter Cartridge is dirty	Clean or Replace the cartridge (see chapter 5.2)
	Too low water level	Fill water to minimum water level
	Heating element defective	Call for service
Bubble massage system does not work	Pump is overheating	Cut off the power and wait until the pump has cooled.
	Auto shut-down feature (30min) is activated	Press the bubble button to reactivate
	Malfunction of the pump unit	Call for service if it does not reset
Water filtration does not work	Filter Cartridge is dirty	Clean or Replace the cartridge (see chapter 5.2)
	Inlet and outlet blocked	Clean the inlet and outlet
	Air inside the pump	Fill water to minimum water level
	Malfunction of the pump unit	Call for service if it does not reset
Pump leakage	Adaptor seal improperly	Replace the seal in the right position
Pump leakage	Water leakage from pump body	Check the pump body, call for service
Spa pool leakage	Spa pool is torn or punctured	Use provided repair kit (see chapter 5.4)
Water is not clean	Insufficient filtering time	Increase the filtering time
	Filter Cartridge is dirty	Clean or Replace the cartridge (see chapter 5.2)
	Pool filled water quality	Change the pool water completely
	Improper water treatment	Refer to the chemical manufacturer’s instructions

WARRANTY

Error code
If the screen displays an error code “Ex”, please refer to the table below.

Code	Situation	Problem	Causes	Solutions
E1	Not heating Not heating properly.	Wrong temperature control sensor.	Temperature control sensor short circuit or open circuit.	Contact service center.
E3	Not heating properly.	High water tempera- ture indicator.	1.The filled water is over 45°C (113°F) 2. The filter cartridge was put on the wrong suction fitting (higher suction fitting).	1. Cut off the power,make sure the pool water is between 2°C~44°C(36°F~111°F).If this does not solve the problem, refer to the box below. 2. Put the filter cartridge on the lower suction fitting.
E4	All functions do not work, buzzing warn.	Low water tempera- ture indicator.	The pool water is lower than 2°C (36°F).	water is between 2°C~44°C (36°F~111°F) · If this does not solve the problem, refer to the box below
E5	All functions do not work, buzzing warn.	High water tempera- ture indicator.	(122°F).	– cian to reset the thermal cutout described in next paragraph. · If this does not solve the problem, refer to the box below
E6	Not heating and Buzzing warns.	Water pressure is not big enough to activate heating.	·Inlet or outlet on inner wall are blocked. ·Filter cartridge is too dirty. ·Pool water does not reach mini- mum water level. ·Do not release air from pump Pump is wrong”	·Clean inlet and outlet ·Add water to reach water level ·Do air release as outlined again · If this does not solve the problem, refer to the box below

E3, E4, E5, E6 error code

If error code is still displayed on the control Box, please do the following instructions :
Check that the water line is between the high and low limits.
Unscrew and clean the 2 nozzles (Entry and exit of water) inside the spa and remove wastes if necessary (Neaf, hairs, fur, skin… foreign matter.
Cut the spa again electrically for 5 minutes and re-connect it, if the error code is still displayed on the control box please contact the Service Center.

Warranty

Avenli products have been inspected and found free of defects prior to leaving the factory. Aveni warrants this product against defects in material and workmanship for a period of time, 1 year for the pump and 6 months for the liner,unless local law has special requirement. Avenli warrants this product begins on the date of purchase and Avenli requires presen-tation of the original proof to purchase to ascertain the date. During the warranty period, Avenli will either repair or replace, at its discretion, any defective produces. Replace- ment products or repaired parts will be warranted for only the unexpired portion of the original warranty.

Shipping cost policy
The return of defect parts to the authorized service center is at the charge of the owner. On warranty period, the return is at the charge of service center.

Warranty policy

This limited warranty does not apply to any defect resulting from negligence, accident, misuse, or other reason beyond Avenli’s reasonable control, included but not limited to: normal wear and tear, negligence or failure to follow the product instructions, improper or inadequate maintenance; connection to improper power supply; chemical water damage, loss of pool water, unauthorized product modification or repair; use for commercial purpose; fire, lightening, flood or other external causes. This warranty is valid only in the country of purchase in such countries where Avenli sells and services the same model with identical technical specifications. Warranty service outside the country of purchase is limited to the terms and conditions of the corresponding warranty in the country of service. Where the cost of repairs or replacement is not covered by this warranty, Avenli will advise the owners and the cost shall be charged to the owner. This warranty only applies to the original purchaser and terminates upon any transfer of ownership. All repairs of which warranty claims are made must be pre-authorized by a Avenli service center.

All the authorized selling dealer is responsible for all in-field service work carried out on your Avenli product. Avenli will not be liable for results of cost of workmanship from an unauthorized service person.

Warranty registration
To validate your warranty, please register your product on our website Avenli:www.avenli.com. It is essential that all informations including customer name, date of purchase, serial number, spa model are indicated. Without these information the warranty will be invalid.

Local after-sales service center
SHANGHAI JILONG SPORT AND LEISURE PRODUCTS CO., LTD
2555 XiuPu Road, Pudong Area,Shanghai,China.
Tel: +86-21-58942200 Web: www.JLeisure-Global.com
JILONG PLASTIC PRODUCTS(JIANGSU)CO.,LTD
NO.1 Industrial Area South Zhongchen Road Zhongyang Town, Suqian,Jiangsu,China

avenli 2-3 Person Inflatable Hot Tub Spa Manual