Baseus WM01 Plus Encok True Wireless Earphones
Baseus WM01 Plus Encok True Wireless Earphones
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Product diagram
Double click touch area – Take out the earphones from the charging case and long press for 3 seconds to turn them on.
Music mode
- Long press left earphone for 2 s: previous song
- Long press right earphone for 2 s: next song
- Double-click the right earphone: play / pause
- Double-click the left earphone: activate voice assistant
Call mode
- Double-click left and right earphone: answer / hang up
- Long press left and right earphone: reject a call
Charging case buttons
- Without earphones, single press the charging case button to show the battery percentage of the charging case.
- With earphones, single press the charging case to show the battery percentage of the charging case, single press again to show the remaining usage time of the left earphone, single press for the third time to show the remaining usage time of the right earphone, single press for the fourth time to show the battery percentage of the charging case. This cycle repeats.
| Name | Baseus Encok True Wireless Earphones |
| Model | Baseus Encok WM01 Plus |
| Material | ABS |
| Version | V5.0 |
| Communication range | 10 m |
| Standby time | 300 hours |
| Music time | 5 hours (70 % of the volume) |
| Music time including case | 50 hours |
| Battery capacity | 40 mAh / 0,128 Wh (earphones)
800 mAh / 1,11 Wh |
| Earphone rated input | DC 5 V = 50 mA |
| Earphone rated consumption current | 8 mA |
| Charging case rated input | DC 5 V = 880 mA |
| Charging case rated consumption current | 96 mA |
| Charging time | 2 hours |
| Frequency response range | 20 Hz – 20 kHz |
| Charging interface | Type-C |
| Suitable for | Compatible with all wireless devices |
Package contents
Product operating method
Before using for the first time, please tear off the insulating sticker on the earphone, and then put it in the charging case to charge. After the earphone and charging compartment are fully charged, remove the earphone from the warehouse. The earphone will automatically turn on. Wait for a few seconds to see a earphone White light flash quickly. When the white light’s flashing, you can open the phone’s Bluetooth and connect to the earphones.
Function definitions (Using both earphones)
• Start – Take out the earphones from the charging case or long press the left and right earphones for 3 seconds to start the pairing between the left and right earphone. After the pairing is successful – when the light of one earphone flashes quickly and the while light of the other earphone flashes slowly, they enter the two-ear pairing mode. Lastly, turn on the phone’s wireless to search the earphones to connect and use.
• Shutdown – put the earphones into the charging case and the earphones will power off automatically. The charging case will charge the earphone automatically.
Single earphone use
- Start – Pick up the earphone from the charging case, turn on the left and right earphone to pair automatically, then enter the two-ear pairing mode.
- Shutdown – put the earphone into the charging case and the earphone will power off automatically. The charging case will charge the earphone automatically.
- Double touch the earphone – Play / Pause / Answer / Hang up
Music Mode
- Long press left / right earphone for 2 seconds – Previous song / Next song
- Long press right earphone for 2 seconds – Play / Pause
- Double-click the left earphone – Activate voice assistant
Call mode
- Double-click the left and right earphone – Answer / Hang up
- Long press left and right earphone – Reject a call
Restore factory settings
- Turn off the wireless of the surrounding phones. Put the earphones into the charging case, open the lid and take out the earphones. When the white light of one earphone flashes quickly and the other earphone’s light flashes slowly, touch left or right earphone three times, then the red light of the earphone flashes once. The earphones are now restored to the factory settings. Put them into the charging case and take them out again. Lastly, turn on the phone’s wireless to search for the earphones to reconnect and use.
- Turn off the wireless of the surrounding mobile phones. Take out just one earphone. When the white light flashes quickly, touch the earphone three times, then the red light flashes once. This earphone is now restored to the factory settings, return it to the case. Take out the other earphone and repeat the operation. After both are restored, put them both into the charging case, take them out and search them to reconnect and use
Pairing mode
- When pairing for the first time, please make sure the distance between wireless earphone and mobile phone is within 1 m.
- Open the charging case and the earphones will automatically power on. The earphone indicators will flash twice – one quick and one slow flash. Enter the dual earphone mode.
- Turn on the wireless function of the mobile phone, search for the wireless devices, select the device named “Baseus Encok WM01” and click connect.
- If needed, enter pairing password “0000”.
- Please repeat the above operation if the pairing fails. The indicator will turn off after the pairing is successful.
- To switch wireless devices, the user must re-enter pairing mode. For specific operations, please refer to the factory reset function.
Note
- If the headset cannot automatically reconnect, please turn off the phone Wireless, perform factory reset, and then reconnect to the phone Wireless.
- Due to the features of Wireless earphones, electromagnetic waves in your area may interfere with wireless connection, thus resulting in silence or disconnection.
Product safety information
- Please read all instructions and warning carefully before using this product, improper use may cause damage to the product.
- Do not store the product in high temperature, strong light and strong magnetic field. Do not place it in other harsh environments such as fire source.
- If water enters, dry it naturally and use it again.
- Improper use of the product may cause damage to the product itself or may endanger personal and property safety.
- Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
- Disintegration of this product by non-professionals is strictly prohibited.
- Use of household appliances or loads more than the output current of this product shall be avoided (no output due to circuit protection).
- Intense physical actions including knocking, throwing, trampling on, and squeezing, etc. shall be avoided.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original component.
Why doesn’t the product turn on?
When using your product for the first time, please check and make sure the earphones battery is fully charged. If the battery runs out of power, your earphone may not turn on.
The earphone is silent during playback?
Check for a valid connection between the device and your earphone. If the device is not properly connected, please reconnect it. Meanwhile, please also adjust the volume on mobile phone or your earphone to a proper level.
Why is the wireless connection unstable, and how far should my mobile phone be kept from the earphone?
Please make sure that your mobile phone is kept within 10% m effective distance from your earphone. Usually if there is no obstruction between your mobile phone and your earphone, then the connection distance can be better. Please make sure that there is not any interference from wireless device and Wi-Fi devices nearby.
Please make sure the earphones have enough power.
Press and hold the earphone for 10 s to turn it off, then press and hold for 3 seconds to turn it on. The earphones will be reset to factory settings, then turn on the mobile phone’s wireless to search for pairing connections.
If the above operations fail, please contact customer service.
Does Baseus wm01 waterproof?
Baseus WM01 Wireless Earbuds Bluetooth Headphones Touch Control 25Hrs Waterproof Built-in Mic Headset TWS Stereo Microphone in-Ear Earphones Long Playtime with USB-C Charging Case White
How do I pair my Baseus wm01 plus?
You don’t have to press anything they will be just turned automatically to the pairing mode
How do you use the Baseus Encok wm01?
Put the left and right earphones into the charging case, open the lid and take out the two earphones. – When the white light of one earphone flashes quickly and the white light of the other earphone flashes slowly, touch left or right earphones three times and then the red light of the earphones flashes once.
How do you charge Baseus wm01?
Start – Pick up the earphone from the charging case, turn on the left and right earphone to pair automatically, then enter the two-ear pairing mode. Shutdown – put the earphone into the charging case and the earphone will power off automatically. The charging case will charge the earphone automatically.
Are Baseus earphones waterproof?
Baseus Wireless Earbuds Bluetooth Earphones W11 with Wireless Charging Case/IPX8 Waterproof/10mm Dynamic Driver/APP Anti-Lost Function for iPhone 12/13/pro, Android – Black
How do you put
simply just open up a case lid you’ll notice the lights will blink. Several times until the left one remains blinking. And then on your samsung phone you’ll go to settings.
How do I reset my Baseus Encok wm01 plus?
By the way, to reset, you need to remove the headphones from the case and while one of them is blinking white quickly, tap it three times. After that, reinstall it in the case, close-open and you can use it.
How do I change my Baseus name wm01?
Then you have to open charger case of your earphones. Then when we got our earphones we have to tap on the settings. Icon. Then click right here and as you can see we can easily change name.
How do I pair my Baseus with my Iphone?
We have to open the settings. And go for the bluetooth tap on the switcher. And right now in the other devices you will find our earbuds so you have to tap on them once.
