User Manual
Airdopes 402 lets you drown in your favorite rhythm with its immersive 10mm drivers and boAt Signature Sound. Its IWP™️ technology and Bluetooth v5.2 offer a seamless and truly wireless listening experience. Let nothing come in between you and your music with its massive 30HRS of playback. Even if you manage to exhaust your battery, ASAP charge empowers you with another 60 minutes of playback within 5 minutes of charge.
Let your thoughts echo clear and loud with ENx™️ technology that ensures crystal clear voice delivery.
Buttons and Indicators
Charging
How can I charge the earbuds?
- Put the earbuds into the charging case in their correct orientation.
- To charge the case, plug in the provided USB cable and connect it to any USB port, for eg- a wall adapter or computer.
- The 4 LEDs aligned horizontally on the charging case indicate the charge/battery status.
- Once all 4 lights are illuminated after charging, then the case gets completely charged.
- A red light on the earbuds will indicate they are being charged.
- A blue light on the earbuds will indicate they are full charged. This light will go o once the earbuds get fully charged.
- When both the earbuds are fully charged, the carrying case will switch off to save power.
How to charge the case?
- To charge the case, plug in the provided USB cable and connect it to any USB port, for eg- a wall adapter or computer.
- The 4 LEDs aligned horizontally on the charging case indicate the charge/battery status.
- Once all 4 lights are illuminated after charging, then the case gets completely charged.
Warning: please do not charge the carrying case with “9V” or “12V” output.
Otherwise, it may cause damage to the case.
What to do if the charging case is not charging?
- Check if the stickers on the charging points of the ear pods are removed or not. If not then it is to be removed and the ear pods will start charging once put inside the charging case.
- Check if the charging cable connected to the case is not broken, use other charging cable and also ensure that the charger being used is not of 9V or 12V as that will damage the case. The LED lights located on the charging case indicate the battery status of the case.
What to do if the earbuds are not charging?
1. Ensure that the earphone case is charged for charging the earbuds
2. Check to see if the earbuds have been put inside the case in the right orientation, and a white light on the earbuds will indicate they are still being charged. This light will go off once the earbud’s have been completely charged.
3. Clean the magnetic connector pins on the case and connector place on the earbuds with a clean cloth with mild alcohol and check the charging of the earbuds again
4. After cleaning, put the left earbud into the case in desired orientation and close the lid.
5. After cleaning, put the right earbud into the case in desired orientation and close the lid.
6. Once both the earbuds are charged, the LED on the case will go off.
What to do if the earbuds are not charging inside the charging case even when the case is charged?
1. Check if the charging pins of the case are clear and there is no obstruction.
2. Check if the charging pin of the earbuds are clear and there is no obstruction.
3. Check if the orientation of the earbuds inside the case is correct and they have been properly inserted inside the case.
4. Check if the pogo pins are clean. You may do so by gently cleaning it cotton swabs with alcohol.
Device Controls
How to Power ON/OFF Airdopes 402?
1. Power ON:
Step1: Take out the earbuds from the charging case.
Step2: Please wait while both the earbuds automatically pair with each other. The earbuds go in to connection mode indicated by alternate Blue/Red lights.
Note:
- Both the earbuds are master earbuds.
- Pairing mode lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the earbuds and follow the above mentioned procedure.
- Airdopes 402 remembers the previously connected devices. Once switched ON, the earbuds automatically reconnect with the previously paired device.
2. Power OFF:
Smart Power Off:
Step1: After usage, remove both the earbuds from your ears
Step2: Place the earbuds back into the charging case in correct orientation and close the lid of the case to power them OFF.
Step3: The LED indicates that it is being charged.
Manual Power Off:
Step1: Long touch the CTC on both earbud for 5 seconds to manually power off the earbuds.
Step 2. Once the earbuds get turned off, place them back inside the case and close the lid.
How Do I factory reset my earbud?
1. Ensure the earbuds are inside the case.
2. Long press the CTC for 8 seconds while the earbuds are inside, and wait till the Red and Blue LED flashes.
3. Shut the case and reopen it again.
4. Once you take the earbuds out from the case they automatically restart.
How can I use a single earbud (Mono mode) at a time?
STEP 1: At this stage your earbuds are in stereo mode & connected to your Bluetooth device.
STEP 2: Simply remove right or left earbud from your ear.
STEP 3: Place the right or left Earbud back into the Charging Case.
STEP 4: Congratulations, you are now using mono/solo mode.
Note:
- Both the earbuds are master earbuds; single earbud usage will work on both the earbuds.
- To switch to stereo mode, simply take out the earbud that has been kept inside the case. It will automatically power on and get paired with the other earbud, hence enabling the stereo usage.
How to activate Voice Assistant in Airdopes 402?
Long press the CTC for 2 seconds to activate the voice assistant.
How to answer/end calls in Airdopes 402?
Single tap the CTC on either earbud to answer an incoming call and once again to hang up an ongoing call.
How to reject calls in Airdopes 402?
Long press the CTC for 1.5 seconds to reject incoming calls
How to play/pause music in Airdopes 402?
Tap the CTC on either earbud to play/pause music at your convenience.
How to change tracks in Airdopes 402?
Next Track: When playing music, double tap the right CTC to skip to the next song.
Previous Track: When playing music, double tap the left CTC to return to the previous song.
Poor Sound Quality
What to do if the sound is distorted/low volume/low bass/low quality?
1. Check if connected device does not have any equalizer settings applied.
2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.
3. Check if the distortion or quality lowers at all volumes or only at high volumes.
4. Check the sound on different media players and different devices and if the distortion happens on all devices or only on specific ones.
5. Check if the problem occurs at all levels of charging or only at low charging levels.
6. Check if the earbuds do not have water droplets, in case they do, use the blow dryer to dry out any water from a distance.
7. Check if the earbuds are clogged with ear wax, simply clear the earbuds to restore the original sound.
What to do if the sound output is muffled?
1. Check if connected device does not have any equalizer settings applied.
2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.
3. Check if the distortion or quality lowers at all volumes or only at high volumes.
4. Check the sound on different media players and different devices and if the distortion happens on all devices or only on specific ones.
5. Check if the problem occurs at all levels of charging or only at low charging levels.
6. Check if the earbuds do not have water droplets, in case they do, use the blow dryer to dry out any water from a distance.
7. Check if the earbuds are clogged with ear wax, simply clear the earbuds to restore the original sound.
Bluetooth Connectivity
What to do if the device is not connecting via Bluetooth?
1. Check if the device is in pairing mode and indicating that by alternating green and red LED flashes on either earbud.
2. Check if the device is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.
3. Check if the device being connected to supports Bluetooth connections or not.
4. Check if it is a passcode issue and if so enter 0000 / 1234.
5. Check if the device being connected to does have any software issues or not – Check to forget the device on Bluetooth, update the mobile software, if it still does not work try factory resetting the device.
What to do if the device is not entering stereo mode / is stuck in mono?
1. Check when both the earbuds are taken out of the charging case, the earbuds will enter into the Connection Mode, indicated by light blue LED flashes.
2. If one of them fails to smart power on, to manually switch the earbuds on (Manual Power On), long touch the CTC for 3 seconds on both Left and Right earbuds for switching them on until the LED light begins to flash in red and white colours.
3. Place the earbuds in the charging case and then try using them again. Check if it connects automatically.
4. Check and see if hard resetting the device work as desired or not.
5. Check if the earbuds are charging or not. If not then clean the earbuds and the charging case specially the charging pins and connectors with mild alcohol swab and see if it goes in charging mode or not.
What to do if the device occasionally disconnects/ the right earbud keeps disconnecting?
- Check if restarting the device resolves the issue.
- Check if the same problem happens for different devices and media players.
- Check if there are any obstructions between the earbuds and the device and clear them, move the device at a closer range to the earbuds and see if it still affects it.
- Try factory-resetting the device.
Why one side of my earbud not working?
Simply the earbuds back in to the case and take them out or perform the factory reset.
Dysfunctional Voice Assistant
What to do if the voice assistant does not wake up?
Check if the pairing device has the feature enabled. Google Assistant or Siri should be enabled to use this feature from your device.
Please follow the steps carefully, long touch the CTC for 2 seconds and release, this should allow Google Assistant or Siri to pop up on the media screen of the device. Though under some circumstance, this feature may or may not work on some devices which may be restricted by default.
Product Functionality
What to do if the device does not turn ON?
1. Check to see if the device has been properly charged first or not. A blue light on the earbuds will indicate they are still being charged. This light will go off once the earbud’s have been completely charged.
2. Check if the voltage of the charger is correct for the charging case and if the lights on the bottom are glowing to indicate the charge level.
3. Check by switching the earbuds on manually, press and hold the capacitive touch control for 2 seconds until the LED begins to flash in blue.
4. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.
5. Check if the charging pins of the case and earbuds have some dirt accumulation or corrosion and clean them with alcohol swab and then put them back in the case for charge and the earbuds should start charging.
What to do if the in-built controls (CTC) of the device are not working?
1. Check if the controls do not work while connected to another device.
2. Check if the media player being used supports such controls and if the controls do not function on call or other media players
3. Check if the controls have been physically damaged or exposed to any hazards.
4. Check if the control area has some sweat and oil as that might interfere with the capacitive touch control and clean the control area to remove any oil or sweat and the touch control should start working.
Instant Pairing
What to do if Insta Wake & Pair (IWP) is not working for my Airdopes?
- Make sure that you have paired the Airdopes at least once to the device you are trying to use IWP with before.
- Check if Bluetooth is turned on for your media device and it has the Airdopes in the list of paired devices.
- Try factory-resetting the device.
- Check if your Airdopes battery case has battery in it to have IWP functioning.
Microphone Functionality
What to do if the voice is muffled during calls/the microphone has muffled input?
- Check if restarting the device resolves the issue.
- Check if dust or ear wax as accumulated near or inside the microphone port, there is no blockage on the microphone.
- Check if sweat or water has gone inside the microphone.
- Check if there are any obstructions between the earbuds and the device and clear them, move the device at a closer range to the earbuds and see if it still affects it.
What to do if any problem related to any functionality occurs in Airdopes?
- Check if restarting the device resolves the issue.
- Place the earbud’s in the charging case and then try using them again.
- Try factory-resetting the device.
General FAQs
Product Functionality
What is Insta Wake N’ Pair (IWP) technology?
Our IWP technology allows the earbuds to connect to your phone if they have already been paired before instantaneously upon opening the case.
Simply open the case and ensure that the Bluetooth is turned on for your media device, the buds will connect as soon as the case is opened without the need to take them out of the case first.
How to enable IWP for my earbuds?
There is no special process to enable IWP, simply follow the steps to pair your Airdopes to your media device first, then upon subsequent usage the IWP tech will be enabled automatically and the Airdopes will pair automatically to your previously paired media device if Bluetooth is turned on your media device.
Does Airdopes 402 support ENx technology?
Yes. Airdopes 402 supports ENx technology.
How long does Airdopes 402 last on a single charge?
Airdopes 402 wireless earbuds offer battery backup of up to 4 hours on a single charge. They also give a total playback time of 20 hours along with the charging case.
Does it support fast charging?
No. Airdopes 402 does not support fast charging.
If there are other exceptions in usage, what do I do?
Place the earbud’s in the charging case and then try using them again. If this does not work, try re-setting the device.
Water/Dust Protection
Are my Airdopes 402 waterproof and sweat resistant?
Yes, Airdopes 402 is IPX4 Dust and Water resistant. You can use it for your workouts or carry them along on long trips.
