Boltune Wireless Earbuds BT-BH023 Manual

Active Noise Cancelling True Wireless Stereo Earbuds Model: BT-BH023

PACKAGE CONTENTS (Fig. 1)

1. Boltune ANC True Wireless Stereo Earbuds (BT-BH023)
   
2. 6 x Ear Tips (two are equipped on the earbuds)
   
3. 1 x USB-C Charging Cable
   
4. 1 x User Manual
   
5. 1 x Quick Start Guide

PRODUCT DIAGRAM (Fig. 2)

1. Multifunction Touch Control
2. LED Indicator
3. Microphone
4. Noise-cancelling Microphone
5. Charging Contacts
6. USB-C Charging Port
7. Charging Case
8. Charging Indicator
9. Charging Slot

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.

Hearing Safety

• Do not wear earbuds with high volume for a long time to avoid damaging your hearing.
• Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference.
• Do not set volume too high to stay aware of your surroundings.
• Please refer to local laws and regulations if you want to answer phone calls via this device during driving.
• For your safety, avoid distraction from music or phone calls when you are driving or doing other activities with potential dangers. Warning: Please set the volume to proper level to avoid hearing damages.

Caution

• Do not expose this product to high temperatures.
• Do not immerse the earbuds into water or expose them to humidity for a long time.
• Do not clean the product with detergent containing alcohol, ammonia, benzene or abrasives.
• Avoid dropping.
• Place the earbuds back into the charging case when not in use and keep it away from children and pets to avoid choking hazard.
• Unauthorized disassembly of any parts of this product is forbidden, which may cause fire hazard, warranty voidance, and/or property loss.
• Close attention is needed when using near children.
• Keep the charging case away from water, rain or any other liquid.
• Don’t use the product in thunderstorm to avoid malfunction or electric shock.
• Always ask a professional technician or authorized personnel for repair.

This product contains lithium battery. Never expose it to excessive heat such as direct sunlight or fire to avoid explosion.

HOW TO WEAR

Choose the Right Tips (Fig. 3) Ear tips with different sizes are included in the package, try all sizes and choose the ones fitting you best.

Wear the Earbuds (Fig. 4)

Please wear the earbuds as shown below.

Bluetooth Caution

• When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid
  possible signal interference.
• When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten
  the effective range.

USING YOUR EARBUDS

Charging

Charging the Earbuds

1. Put the earbuds into the charging case as per the L (left) and R (right) marks (Fig. 5).
2. Cover the lid and charging will start automatically (Fig. 6).

Note:

• Please fully charge the earbuds when using them for the first time.
• When battery is low, a “Battery low” voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later.
• Charge the earbuds at least once every 3 months when not using for a long time.
  

Charging the Charging Case

1. Connect the charging port with any USB charging adapter or active computer USB port (Fig. 7).
2. The charging indicators will light up progressively.
   Note: Unplug the charging cable (timely) when fully charged.
   

Power On (Fig. 8)

Uncover the lid and they will power on automatically

Power Off (Fig. 9)

Put the earbuds into the charging case and close the lid, they will turn off automatically.

Pairing

• You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10 minutes, they will turn off automatically.

Couple Earbuds Mode

1. Uncover the lid and take out both earbuds. They will connect with each other automatically. The LED indicator on the left earbud will flash red and green alternately indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby devices. Find “Boltune BT-BH023” in the searching results, tap on the name to connect.

Note:

•  It is not recommended to wear the two earbuds on different people. If needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple earbuds mode.

Single Earbud Mode

Single Earbud Mode is available only for the left earbud.

1. Take out the left earbud from the charging case, and make sure the other one is placed in the charging case.
2.  It will try to pair with the last paired device first then enter pairing mode with its LED indicator flashing red and green alternately if pairing failed.
3. Turn on the Bluetooth function on your device and search for nearby devices. Find “Boltune BT-BH023” in the searching results, tap on the name to connect.

Note:

If you want to change to couple mode, simply take out the right earbud from the charging case, they will pair with each other automatically.

Clear Pairing List

If you failed to pair your device with the earbuds, please clear the pairing history as instructed below:

1. Place both earbuds in the charging case.
2.  When the LED indicators on both earbuds stay solid red, press and hold the Touch Control on both earbuds for 10 seconds until the LED indicators flash
   red three times.
3. If you have paired your device with the earbuds before, remove “Boltune BT-BH023” from the Bluetooth device list and pair again.
4. Take them out to re-pair with your Bluetooth® device as instructed in “Pairing” section.

Note:

If you want to pair the earbuds with another device when you have already paired them with a device, deactivate the Bluetooth function on the paired device or remove “Boltune BT-BH023” from its Bluetooth list. Restore the earbuds to factory settings as instructed above if pairing failed.

OPERATION AND FUNCTIONS

Function	Operation	Voice Prompt
Play / Pause	Tap the Touch Control on  either of the earbuds twice	/
Volume +	Tap the Touch Control on the right earbud	Toots when highest setting is reached
Volume –	Tap the Touch Control on the left earbud	/
Next Track	Tap the Touch Control on the right earbud three times	/

Previous Track	Tap the Touch Control on the left earbud three times	/
Answer Phone Call	Tap the Touch Control on either of the earbuds once	/
Hang Up Phone Call	Tap the Touch Control on either of the earbuds twice	/
Decline an Incoming Call	Tap and hold the Touch Control on either of the earbuds for 2 seconds	Call rejected
Turn On / Off ANC Function	Only available in Couple Earbuds Mode: Tap and hold the Touch Control on the left earbud for 2 seconds	Toot
Turn On / Off Voice Control	Couple Earbuds Mode: Tap and hold the Touch Control on the right earbud for 2 seconds Single Earbud Mode: Tap and hold the Touch Control on the left earbud for 2 seconds	Toot
Clear Pairing List	Refer to the “Clear Pairing List” section	/
Go into Pairing Mode	Refer to the “Pairing” section	Pairing
Successfully paired with your device	/	Connected
Bluetooth out of Range / Failed to pair with your device	/	Disconnected

Note: Only when you are wearing the earbuds can you hear the voice prompt.

CLEANING AND MAINTENANCE

1. Clean the earbuds and the charging case on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
   Note: Do not insert anything into the product.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.

TROUBLESHOOTING

No.	Problem	Solution
1	Failed to turn on the earbuds	Earbuds low battery, please charge them
2	Failed to charge the earbuds	Place the earbuds into the charging case properly Make sure the charging case is fully charged
3	Can’t charge the charging case	Make sure the charging cable is intact and plugged in properly
4	Can’t find “Boltune BT-BH023” in the               Bluetooth device list	The earbuds reconnected with previously paired device automatically: Deactivate the Bluetooth function of previously paired device or clear “Boltune BT-BH023” from its Bluetooth device list, and then search again

5	Failed to pair the earbuds with           your device	Turn on the device and activate its   Bluetooth function before pairing Bring the earbuds into pairing mode as instructed in the “Pairing” section
6	No sound in one of the earbuds in couple earbuds mode	Place both earbuds back to the charging case then take them out, they will        pair with each other automatically. If pairing failed, restore them back to the    factory settings as instructed in the “Clear Pairing List” section
7	Poor sound quality	Wear the earbuds properly and keep them close to each other. Place the connected device close to the earbuds or remove the obstacles between them Clear the debris on the earbuds
8	Unstable connection	The effective distance may shorten with obstacles in the way Turn off other Bluetooth devices to decrease the interference
9 10 11	Can’t hear the other party during a phone callThe other party can’t hear your voice during a phone call Touch Control of the earbuds is unresponsive	Can’t hear the other party during a phone call Free the built-in microphone of any covers Place the two earbuds into the charging case and cover the lid, disconnect the Bluetooth connection. Uncover the lid to turn on the earbuds and pair again.

WARRANTY AND SERVICE

If any problems occur, please contact the Boltune Customer Care Centre in your country via the contact information listed in this User Guide.
www.boltune.net

FAQS

Are these earbuds compatible with the Google Pixel 6 pro?

Yes, it is compatible with the Google Pixel 6 pro, wish you have a good buying experience!

Do these earbuds charge in the case?

Yes they do.

Are Boltune earbuds any good?

The Boltune BT-BH024 are good for commute and travel. They’re decently comfortable, and if you like an in-ear fit, you can wear them for long periods without fatigue. They’re also very portable, and their hard charging case helps protect them when you’re on the go.

Are Boltune earbuds noise Cancelling?

These headphones from Boltune are a pair of over-ear headphones that have built-in active noise cancelling and support Bluetooth 5.0.

How long do Boltune earbuds last?

The Boltune True Wireless Earbuds offer a whopping 40 hours of total charge, and 6 hours of playback in a single use.

Is Boltune a good company?

Very good budget option for a Bluetooth earphone. Outstanding battery life, good sound quality and rugged enough for a falls and rough tugs. Along with Bluetooth 5.0 with an extremely simple, no-fuss connectivity with multiple devices makes this a very good purchase.

Are Boltune wireless earbuds waterproof?

Boltune BT-BH020 Wireless Earbuds, Bluetooth Headphones Bluetooth 5.0 Wireless Headphones 4D Surroud Heavy Bass IPX5 Waterproof True Wireless Stereo Headsets-02,Bright Black,M.

Are Boltune earbuds iPhone compatible?

Compatible devices: Bluetooth-enabled devices (iPhone / Android / iPad, etc.)

How do you know when Boltune earbuds are done charging?

It blinks while charging and becomes steady when fully charged. That single LED light will flash red when you open the case when the charge in the case is low. Opening the lid of the case will power on the earbuds automatically and closing the case will power them down

How long does it take Boltune earbuds to charge?

The charging case supports a form of fast charging and can be fully charged in around 90 minutes.

Why is my left wireless earbud not working?

One side of your wireless earbuds may not be working because your first time setting the earbuds up might not have run properly. Other reasons include a bug (which requires a manual reset), needing to be reconnected to your other device using Bluetooth and actually having damage to the hardware.

Why won’t my Boltune earbuds connect?

If you failed to pair your device with the earbuds, please clear the pairing history as instructed below: Place both earbuds in the charging case. red three times. If you have paired your device with the earbuds before, remove “Boltune BT-BH023” from the Bluetooth device list and pair again.

Does Boltune BT BH020 have microphone?

Boltune BT-BH020 Truly Wireless Bluetooth In Ear Headphone with Mic.

Why are my Bluetooth earbuds not charging?

Inspect the charging port of your headphones for any damage like bent connectors or bent metal. Also, make sure that the port itself isn’t loose when you touch it, as this could be a sign that the connectors have detached from the headset.

Are Boltunes waterproof?

Wireless Headphones, Boltune Bluetooth 5.0 IPX7 Waterproof 16 Hours Playtime Bluetooth Headphones, with Magnetic Connection, Sports Earbuds for Running Built-in Mic (Grey)

Why won’t my iPhone 13 connect to my headphones?

Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.

What happens when one earbud doesnt work?

If a single earbud only cuts out occasionally, try twisting and taping the cord until sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds.

Why is Bluetooth not finding devices?

Even if Bluetooth is turned on, your phone itself might not be ‘discoverable’. This means that a Bluetooth device you haven’t yet paired cannot see your phone. To make it visible to other devices, open the main Bluetooth settings. On Android, phones remain discoverable so long as you stay on that screen.

Why won’t my earbuds pair with my phone?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

Can you overcharge earbuds?

No, you can not over charge the ear buds. This really should not be a concern with any lithium ion product.