Ceptor Go TWS Earbuds User Manual
Using Instructions
Power on/off
To start the headset, take the earbuds out of the case. Place the earbuds back in the case to turn them off or press and hold the earbud for 2 seconds to Power on or 5 seconds to power off.
Charging
Connect the USB -C cable to the charging port on the case and a computer or a USB power adapter. There are four LED indicators that will light up inside the case to indicate the battery level. They will gradually fill up. Each earbud has a LED indicator that will turn on and shine red when they are being charged in the case. When the earbuds are fully charged the indicator will turn off.
Pairing
Open the case. Remove the earbuds, they will start blinking and pair together. Open Bluetooth settings on your device and find “Ceptor Go” and choose to connect. Pairing will occur automatically after this each time the earbuds are removed from the case.
Managing music and personal assistant
Press either of the earbuds once to play or pause music. Double-click the right earbud to raise the volume or the left to lower the volume. Triple-click the right earbud to go to the next song and the left earbud to play the previous song. Press and hold either earbud for 3 seconds to start the personal assistant on your device (Siri and Google Assistant).
Managing calls
Press either earbud once to answer or hang up a call. Press and hold either earbud for at least 3 seconds to reject an incoming call
Safety information
This product contains a rechargeable Li-po battery and the battery can not be replaced. To prevent possible hearing damage, do not listen at high volume levels for long periods.
Specifications
| Bluetooth | 5.0 |
| Frequency | 20 Hz – 20 KHz |
| Sensitivity | 92 +/- 3 dB |
| Range | up to 10 m |
| Talk/play time | up to 3 h |
| Charge time (earbuds) | 1.5 h |
| Charge time (case) | 2 h, full battery last 3 charges |
| Charging | USB-C |
| Battery (earbuds / case) | Li-po 3.7 V, 40 mAh / 3.7 V, 300 mAh |
Support
Website: www.roxcore.com
Box 50435, Malmo. Sweden
Version: 2020-06-24
