DCOLOR DVB-T2 Digital Terrestrial Television Manual

DCOLOR DVB-T2 Digital Terrestrial Television
User Manual

Easily Upgrade your TV to DVB-T2/C
Happy? Tell the whole world
Unhappy? Contact us to get help

Packing list

Functional Port

Update to DVB-T2/C

Attention

1. Place the TERRESTRIAL Box in front of your TV Not behind it
   
2. Insert 2 AAA batteries (not included) into you’re remote

DVB Remote Control

POWER: turn ON/OFF the DVB device
TV Control
POWER: turn ON/OFF the TV
SET: auto-learning setting

MEDIA Control
Show the REC media via the USB device
Switch 720P or 1080P
Switch 16:9 or 4:3
Book listing control
Show the subtitles (if available)
Skips to the previous channel

MENU Control
Electronic guide (if available)
Info of the channel
MENU: open the main menu
EXIT: Exit from a menu

MORE Control
AUDIO: selects the language of the channel
TTX: Teletext ( if available)

FAV: creates and shows the list of the favorite channels
REC: start recording in the USB device
PAGE: navigate inside the menu
CHANNEL Control:
TV/RADIO: switch TV or Radio channel

Remote Auto -learning Set

Troubleshooting

Problem	Possible cause	Solutions
The front panel the display does not turn on	Lack of tension	Make sure the power cord is properly inserted into a powered outlet Verify that the switch is turned on
No image or sound	The cables connecting the W and the decoder are not connected correctly	Check that the output signal cable is well connected (SCART or HDMI). Also, check the antenna cable.
	TV mode is incorrect	Make sure you have selected the correct input signal on the TV (SOURCE or INPUT key on the TV remote control)
	Incorrect video definition	Press V-FORMAT on the remote control and select a video resolution that allows correct viewing
Intermittent t picture and audio	Insufficient signal strength	Check that the antenna cable is well connected and that the quality of the video signal is adequate.
	Electrical interference	Check that the antenna cable is completely shielded
No audio	The receiver or TV is in silent mode	Disable silent mode using the MUTE button
	Volume level too low	Check that the volume level of the set-top box and television are adequate
	Audio CODEC is not supported	While watching multimedia content, audio encoding may not be supported (while video encoding maybe) and movies may appear without audio. The file is not completely readable.
The remote control not working	Batteries not inserted	Insert the batteries into the remote control
	Low battery	Replace the batteries
	Polarity reversal of batteries	Check that the batteries have been inserted according to their correct polarity, as indicated on the bottom of the battery compartment.
	The remote control is out of its operating range	Approach and point the remote control directly at the appliance.
Media files on the USB stick are not played	The files are not of the supported format	Only some formats are supported
	The compression codec is not supported	Only some codecs are supported