After you’ve connected the Cinema Connection Kit (Wireless) device to your HD DVR, a message will appear on your TV screen within 60 seconds indicating the connection has been detected. Follow the steps below to proceed.
If the WLAN LED does not light up, follow these steps:
A. Press and hold the INFO button on your remote until the System Info & Test screen appears.
B. Select Network Setup from the left-hand menu, and then select Connect Now or Repeat Network Setup.
C. When the connection is complete, you’ll see a screen showing the details of your wireless connection. Select Continue to proceed.
D. Read the information on the next screen, and then press Done.
