Follow the guided setup screens on the TV connected to your replacement Wireless Genie Mini:
a. Return to the location where you set up your Wireless Genie Mini.
b. Wait two minutes or until the Connect Now label is active.
c. Confirm that the Wireless Signal Strength icon displays three (3) GREEN bars. If it doesn’t, see troubleshooting instructions.
d. Select Connect Now.
e. The Enter PIN screen will display after the connection countdown.
f. Using your remote control, enter the PIN you noted in Step 3b. Then select Replace a Location. Select the Client that you wish to remove and select Replace. Confirm your choice by selecting Yes, Replace.
The new Wireless Genie Mini may display a flashing red LED and the screen may flash gray intermittently during this setup step.
g. Return to the Genie HD DVR and select DONE on the Add a Client screen.
If the Wireless Genie Mini displays the ENTER PIN screen again after the two-minute connection countdown, please call 800.531.5000 to complete your activation.
If prompted to program your remote, follow the screen prompts.
