Model No:
WM3911-13: PINE
WM3921-13: LIGHT CHERRY
WM3921E2: MOCHA
WM3921B-DC: BLACK
WM3921W-DC-13: WHITE
WM3921G-DC: GREY
NOTE:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATIN, PLEASE TEAD AND KEEP FOR FUTURE REFERENCE.
BUNK BED
HARDWARE LIST.
PARTS LIST
PARTS LIST
STEP1: One of the headboard top crosses (F) has a label on it, do not use it in this step
Insert wood dowels (7) into the ends of headboard top cross (F), headboard bottom cross (G), and headboard center cross (S).
Attach top posts (A and B) using wood joint connectors (3) as shown.
Notes: Headboard top cross (F) headboard bottom cross (G) and headboard center cross (S) may require that they be pulled closer together or further apart in order to allow wood dowels (7) to align with holes in top posts (A and B).
STEP 2: Repeat the previous step to assemble the remaining three sets of headboard. Be sure to pair the bottom posts (D) and (E) for one pair, (E) and (D) for another and the top posts (C) and (A) for the last pair.
NOTE: Be sure to use headboard top cross (F) with label attached to it between top posts (A) and (C). See illustration for label orientation.
STEP 3:
Attah the two headboards with bottom posts (D and E) to bottom side rails (I and K) using joint connectors (1) and barrel nuts (8) as shown.
Note: this is the lower bunk
CONVERTING THE BUNK BED INTO TWO SINGLE BEDS
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our costomer service department: We will replace the part FREE of charge.
Tel: 1-800-295-1980
E-Mail: [email protected]
Fax: 514-353-7819