Loading manuals...

Emson egg pod 7001FE Manual

Emson egg pod 7001FE Manual Image

Emson 7001FE egg pod

PRODUCT OVERVIEW

IMPORTANT SAFEGUARDS:

  • • EggPod is designed for microwave use only.
  • EggPod has been designed for domestic use only, not for commercial use.
  • Never use EggPod for any purpose other than the one it was designed for.
  • Do not use without water.
  • Do not cook for more than 11 minutes.
  • Be cautious of hot steam when removing the top after microwave cooking.
  • Immediately stop using if any damage is found.
  • If the valve pops up, after the unit has cooled down, ensure the valve is clean and press down to its original position.

USAGE Before initial use hand wash all parts with warm soapy water.

  1. To unlock and open the EggPod, pull the tabs down.
  2. Measure 50ML of water using the provided measuring cup and fill the bottom of EggPod with water.
  3. Place 4 eggs into the bottom tray.
  4. Make sure the lid is properly aligned with the base of the EggPod and pull the tabs up to lock.
  5. Place the unit into the microwave and cook for 9 minutes at a highest setting.
    Note: Cooking times may vary based on microwave wattage, size of eggs, etc.
    If eggs are not cooked perfectly, add or subtract cook time in 1-minute increments to find the ideal cook time for your microwave.
  6. When finished cooking, allow EggPod to cool for 2 minutes before removing it from the microwave. 
  7. Place EggPod in the sink and carefully remove the top. Run under COLD water for 2 minutes.
  8. With water still in the EggPod, replace the top and lock into place. Hold the unit by its handles and shake vigorously UP and DOWN 10 times.
  9. Unlock and remove the top.
    You can now easily remove the eggshells.
  10. Enjoy the perfectly cooked eggs!

CARE and CLEANING

  • Egg Pod™ is not dishwasher safe.
  • Before initial use and after subsequent uses, hand wash all parts with warm soapy water.
  • Remove aluminum inserts when washing.

TO REMOVE BOTTOM INSERT
To remove bottom insert, turn the unit over and slide insert directly out.

TO REMOVE TOP INSERT 

  • To remove the top insert, turn counter-clockwise to unlock.
  • To replace the insert, align the tab as shown above and turn clockwise to lock into place.

EGG POD”‘
ITEM NO. 7001 FE
Distributed by Emson® New York, NY 10001 USA ©Copyright 2019 EMSON® All Rights Reserved. MADE IN CHINA
EGGPODIIC
ITEM NO. 7001FE
Distribue par Emson®
New York, NY 10001 E·U.
©2019 EMSON®
Tous Drolls Reserves FABRIQUE EN CHINE