Loading manuals...

EN Smart Sports Watch Manual

EN Smart Sports Watch Manual Image
EN Smart Sports Watch Owner's Manual


Scan here to download VeryFitPro

Manufacturer name

Shenzhen DO Intelligent Technology Co., Ltd.

11th Floor, 3# Building, Guole Tech Park, Dalang Sub-district, Longhua District, Shenzhen Municipality, China.
Dieses Dokument dient nur als Referenz und stellt in keiner Weise eine Verpflichtung dar.

Quick Start

1. Know the Device

Physical Button

Press the physical button

  1. To return to the previous page; or
  2. To turn on the screen in screen-off state.

Press and hold the physical button

  1. To turn on the device in power-off state; or
  2. In charging state, press and hold the physical button for 5s to reset the program without clearing data.

Power On/Off

Power On
When you start charging the device, it will be turned on automatically.

Note: the device must be charged and activated before the first use; please always use the original charger to charge the device.

Press and hold the physical button to turn on the device.

Power Off
Shutdown path: [Setup]→[Power Off].

Downloading and Pairing

1. Download the APP

Scan the following QR code to download “VeryFitPro” or search for and download “VeryFitPro” in “APP Store”on your phone.


2. Pairing

Turn on the APP and Bluetooth. Search and select the device in the APP (or scan the QR code of the device manually). Finally, bind the device in the APP or confirm binding on the device.

Screen Operations

Swipe the screen up/down

  1. To switch among pages at the same level; or
  2. To view long text or details.

Swipe the screen left/right

  1. To switch among pages at the same level.

Click the screen

  1. To go to the sub-page; or
  2. To complete the corresponding action, depending on which on-screen button is clicked.

Click and hold the screen

  1. To change the watch face wallpaper.


ID205G supports multiple sports modes, GPS movement track records, women’s health, watch face wallpaper, heart rate monitoring, sleep monitoring, notifications, etc.; for the use and FAQs of each function, please scan the following QR code to check operating instructions or start the APP to find answers.


Below are three recommendations on wearing and maintenance:

  1. Keep the device clean;
  2. Keep the device dry;
  3. Do not wear the device too tight

* Do not use household cleaners to clean the device. Use soap-free cleaners instead.
* For stains that are difficult to remove, it is recommended to scrub with alcohol.

Waterproof performance: the device is not suitable for diving, swimming in the sea or sauna; it is suitable for swimming pool, shower (cold water) and swimming in shallows.


  • To prevent device failure, fire and explosion, never place the device or its accessories in any extremely-high-temperature or extremely-low-temperature area.
  • To prevent device damage, accessory damage and device failure, always protect the device against strong impact or shock.
  • Do not disassemble or modify the device or its accessories without authorization. Any device failure should be referred to our after-sales service personnel.

The device meets the EU ROHS criterion.

Please refer to IEC 62321, EU ROHS

Directive 2011/65/EU and revised directive.

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.


Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.