ENERMAX ETS-T40 fit Ram Compatibility Air CPU Cooler Manual

User Manual

ENERMAX ETS-T40 fit Ram Compatibility Air CPU Cooler

100% RAM compatibility Air CPU Cooler

Part List

Specifications

Installation

Step 1-A-1: For Intel LGA775/1150/1155/1156/1366

Insert the position screws into the proper holes on the back plate. (If your CPU platform is Intel LGA2011, please skip to step 1-B).

Step 1-A-2: For Intel LGA775/1150/1155/1156/1366

Install the back plate on to the back of the motherboard. Put the stand-offs into the back plate screws.

Step 1-B: For Intel LGA2011

Fasten the Intel LGA 2011 screws to the motherboard.

Step 2: For Intel installation

Install the Intel mounting plates with the arrow marks towards to the CPU, then fasten them with spring screws.

Step 3-1: For AMD installation

Insert the position screws into the AMD holes on the back plate.

Step 3-2: For AMD installation

Install the back plate on to the back of the motherboard. Put the stand-offs into the back plate screws.

Step 3-3: For AMD installation

Combine the AMD mounting plates on the Intel mounting plates (arrow marks on the Intel plates facing towards the CPU) with the mounting plate screws. Then install the combined plate on the motherboard with spring screws.

Step 4

Apply the thermal grease evenly onto the CPU surface. Remove the protect film from the cooler base.

Step 5

Apply the thermal grease evenly onto the CPU surface. Remove the protect film from the cooler base.

Step 6

Attach the vibration-absorbing rubbers to the cooler.

Step 7

Attach the fan to the cooler with fan brackets. Connect the PWM 4 pin to the CPU Fan header on the motherboard. ! Please notice the direction of the airflow!

Limited Warranty

Please read this limited warranty carefully. Warranty is subject to void under following criteria:

The serial number label or warranty seal is defaced, modified, or removed.
Taking apart of the product and/or modification of any component or cable without ENERMAX’s written authorization.
Ignoring connector’s faulty-insertion-prevention design by attaching a connector to a device under incorrect orientation.
Damage caused by natural phenomena or uncontrollable forces, such as lightning, flooding, fire, earthquake, or misuse, abuse, negligence, accident, wear and tear, mishandling, misapplication.

This ENERMAX Technology Corporation product is warranted to be free from defects in material and workmanship for a period of one (1) years from the date of purchase. ENERMAX Technology Corporation agrees to repair or replace the product, at its own option and at no charge, if, during the warranty period, it is returned to nearest ENERMAX Technology Corporation subsidiary/agent with all shipping charges prepaid and if inspection reveals that the product is defective. Please present the proof of purchase for requesting RMA. Charges for removing or installing the product are excluded under the terms of this warranty agreement. This warranty shall not apply to any product, which has been subject to connection to a faulty power source, alteration, negligence, or accident, or to any product, which has been installed other than in accordance with these instructions. In no event shall ENERMAX Technology Corporation, or its subsidiaries, or agents be liable for damages for a breach of warranty in an amount exceeding the purchase price of this product.

If you are uncertain whether or not your ENERMAX liquid cooler is defective, please contact your dealer/reseller for support! Web Site: http://www.enermax.com E-mail: [email protected]

ENERMAX Technology Corporation, 15F-2, No. 888, Jing-Guo Road, Taoyuan City (330), Taiwan (R.O.C.), Tel. +886-3-316-1675, Fax. +886-3-346-6640

©2015 ENERMAX Technology Corporation. All rights reserved. Specifications are subject to change without prior notice. Actual product and accessories may differ from illustrations. Omissions and printing errors excepted. Content of delivery might differ in different countries or areas. Some trademarks may be claimed as the property of others. Reproduction in any manner without the written permission of ENERMAX is strictly forbidden.