Etoshopy
Bluetooth 5.0 TWS Wireless Earbuds In-Ear
Specifications
- MODEL NUMBER: JS36
- BT VERSION: 5.0
- TRANSMITTING DISTANCE: 10m/33ft
- FREQUENCY RANGE: 40-20KHz
- SENSITIVITY: 106±3dB
- IMPEDANCE: 32Ω
- MUSIC PLAYTIME: about 4 hours (depends on music volume)
- CHARGING TIME: about 1 hour
- COLOR: Black/White
- PACKAGE WEIGHT: 75g/2.18oz
- FEATURES: Noise-canceling
- BRAND: Etoshopy
Introduction
Bluetooth 5.0 provides high data transmission speeds, a stable and quick connection, and low battery consumption. Lightweight and small in size, they fit comfortably in your ear canal. Water- and sweat-proof, so you may enjoy music and sports without stress. The earphones may be charged and stored in a charging case. The remaining power can be displayed on a digital display. Touch control is supported. Music and phone calls are simple to control.
PACKAGE LIST
- 1 * Pair of Earbuds
- 1 * Charging Cable
- 1 * User Manual (English)
- 1 * Charging Case
HOW TO INSTALL
In both ears, place the headset (earbud) pieces. Place the (left) marked unit in your left ear and the (right) marked unit in your right ear. A tactile dot is present on the left unit. To slide the earbud tip deep into your ear, twist the headset (earbud).
HOW TO PAIR
On your phone, enable the Bluetooth pairing mode. To connect, tap “Air +.” When connected correctly, the right earphone will respond with a voice prompt: “CONNECTED” and a blue light will flash. When the earbuds are turned on, they automatically connect to the last associated phone.
HOW TO USE
- Check to see if your phone’s Bluetooth is turned on. The distance between your phone and earbuds should be less than 3 feet (1 meter).
- Turn on your earbuds and go to your phone’s Bluetooth settings to look for new devices.
- You’ve established a connection and are ready to listen to music!
Frequently Asked Questions
- What is the best way to control the volume on my TWS 5.0 earbuds?
The Creative Outlier Air TWS earbuds provide direct volume control, which is simple to use. Turn down the volume by pressing and holding the left earpiece. Turn up the volume by pressing and holding the right earbud. - How do you connect the two earbuds?
The two Bluetooth headsets must be paired at the same time; otherwise, only one will pair. 1- push both buttons until a blue flashing light appears (don’t stop pressing when alternating blue/red lights appear). 2. Open Bluetooth on your phone and search for tws-k2, then select one of them to pair. - What is the procedure for turning on TWS earbuds?
To turn on each earphone, press and hold the power/pairing button for up to 2-3 seconds. A voice prompt with “Power On” will be heard. - What is the best way to charge TWS earbuds?
It’s dubbed “True Wireless Earbuds” since it connects without using a cable. However, you must charge your case using a USB or Type-C cable. - What is the procedure for resetting TWS earbuds?
Remove the earbuds from the case and press and hold the buttons until they turn off. Hold down the buttons on both earbuds for roughly 5 seconds, starting with the earphones in the OFF position. The LEDs will become white for around 5 seconds before turning off. Your earphones will be reset. - Why are my TWS earphones not working?
A hard reset may be required. Use a powered USB charger or port to connect your headphones. Hold the volume – and multifunction button (this is the power button) simultaneously while the device is plugged in. Your headphones should be reset. - On wireless earbuds, where is the button?
Place the earphones in the charging case and push the power button on the front of the case to charge them. Hold down the multi-function buttons to switch off the earphones before putting them back into the case to be charged after use. - What does TWS stand for in earbuds?
Wireless earbuds have grown into a very compact size and cordless form factor with the emergence of Bluetooth® technology, which we term True Wireless Stereo (TWS). - How long does it take to charge TWS earbuds?
Both the headphones and the charging case have a wide range of charging times. It takes about 1-2 hours for headphones to fully recharge within their case, and the case takes less than an hour. This can be as little as 30 minutes if the charging case in question supports USB-C. - Without a case, how do you charge TWS earbuds?
TWS headsets can be charged without a case. However, they have another feature: the device is connected to a USB input or charging via a particular connection. The bundled double cord is utilized, for example, on the I7 TWS model.