6P Smart TV Box
Instruction Manual
| Numbering | Part Name | Quantity |
| 1 | EVPAD | 1 |
| 2 | Remote Control | 1 |
| 3 | User Manual | 1 |
| 4 | HD Cable | Optional |
| 5 | AC Adapter | 1 |
- The HD cable is optional. please ask the agent if you have any problems.
- specifications and appearances of any product are only for information, take practicality as standard.
- It is recommended that users choose HD Cable with a length of not more than 1.2 meters, 128 braid nets, and four layers of shielded dual magnetic rings.
Warranty Period
- The purchase of the company’s products can enjoy one year from the date of purchase of the warranty period. Special agreement to extend the sale period.
- During the warranty period, users can enjoy a valid purchase certificate free of charge after-sales maintenance services.
The following is not a free warranty EVPAD can provide paid service
- Has exceeded the valid warranty period.
- Failure to follow the instructions required by the installation, use, maintenance, and storage of the fault or damage.
- Failure or damage caused by repair by a NON-EVPAD authorized service person.
- Due to accidental factors or that the behavior of the product damage, such as broken, Water, input voltage, corrosion, etc.
- Unauthorized changes to the product’s native configuration files or unverified product firmware without EVPAD’S approval.
- Unauthorized alteration, tear up the after-sales service card product serial number.
- Damage caused by transportation, loading, and unloading on the way back to repair by the customer.
- Failure and damage caused by flood, fire, lightning, and other irresistible.
- Other non-product itself design, technology, manufacturing quality problems caused by failure or damage
Special Reminder
- Before use, please be sure to carefully read the product manual
- Dealers to you to make non-division We commitment to guarantee, We do not assume responsibility for this Division
- Before product repair, please contact our technical service, seek technical support to confirm the product failure
- Be sure the network cable which connected to the set-top box is from the router, and the router DHCP feature is turned on.
- Connect the network cable into the Lan port of the set-top box, make sure it is good to contact for the Internet cable and router.
Set >Wifi>Select the desired wireless connection > Enter password
Service Warranty
Dear users, this card is the only certificate for device maintenance and service affirmation so please keep it properly.
Product type________________
MAC Code_________________
Name of dealer______________
Contact of dealer_____________
Sale date____________________
Authorization Code___________
Purchase price_______________
Voice remote control instructions
Instruction of the Learning Function
- Press the programmable POWER key of the TV Box Remote Control for 5 seconds. The LED light will turn on, indicating that the programmable keys are in the programmable state.
- Press one of the programmable keys of the TV Box Remote Control, its LED light will flash.
- Direct the head of the TV Remote Control at the head of the TV Box Remote Control. (Please keep 3-5cm distance between the two Remote Controls.)
- Press down the original key of the TV Remote Control, the LED light of the TV Box Remote Control will flash 3 times quickly and then stay lit up, indicating that the programmable key has been programmed. To program other keys, please repeat steps 2-3-4.
- The LED light will flash 5 times if the programmable key fails to be programmed. If so, please repeat steps 2-3-4.
- Press any non-programmable key of the TV Box Remote Control to exit the programmable state.
When pressing the key, the LED flashes continuously for more than 10 seconds, indicating the battery is low. Please replace the battery
Maintenance record
| Date | Phenomenon of fault | Reason of fault | Treatment |
FCC ID: 2A4G8X6P8P
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.