Loading manuals...

expert4house А60 Shelly Vintage WiFi Dimming Bulb Manual

expert4house А60 Shelly Vintage WiFi Dimming Bulb Manual Image

expert4house А60 Shelly Vintage WiFi Dimming Bulb

This document contains important technical and safety information about the device and its safety use and installation. Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any). Allterco Robotics is not responsible for any loss or damage in case of incorrect installation or improper operation of this de-vice due to failure of following the user and safety instructions in this guide. The Shelly WiFi Dimming Bulb model A60/A19, ST64/ST21, G125/G40 by Allterco Robotics is intended to be installed into a standard light socket E27/E26 in order to dim the light. Shelly may work as a standalone device or as an accessory to a home automation controller.


A60/A19 ST64/ST21 G125/G40
Power supply AC 220-240V/AC 110-130
Socket E27/E26
Power Rating 7 W 4 W
Brightness 750 lm 260 lm
Color Temperature 2700K
Color Index Ra>80
Working temperature From -10°C to 40°C
Complies with EU standards RED 2014/53/EU, LVD 2014/35/EU, EMC 2014/30/EU, RoHS2 2011/65/EU
Radio signal power 1mW
Radio protocol WiFi 802.11 b/g/n
Frequency 2412-2472 МHz; (Max. 2483,5 MHz)
RF output power 13.74 dBm
Operational range (depending on local construction) up to 50 m outdoors, up to 30 m indoors
Dimensions 60×115 mm 64×160 mm 125×155 mm
Electrical consumption < 1 W
Protection class IP20
Life Time 15,000 hours
Equal Incan 60W 40W
Filament Straight Spiral
Glass/Coating Clear Amber

Technical Information

  • Control through WiFi from a mobile phone, tablet, PC, auto-mation system or any other device supporting HTTP and/or UDP protocol
  • Microprocessor management
  • Controlled elements: multiple LED diods
  • Shelly may be controlled by an external switch
    • CAUTION! Danger of electrocution. Plugging the device to the power grid has to be performed with caution.
    • CAUTION! Do not allow children to play with the device. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away from children.
    • CAUTION! Please handle it with care! The Shelly Vintage is FRAGILE!

Introduction to Shelly

Shelly® is a family of innovative devices, which allow remote control of electric appliances through mobile phone, PC or home automation system. Shelly® uses WiFi to connect to the devices controlling it. They can be in the same WiFi network or they can use remote access (through the internet). Shelly® may work standalone, without being managed by a home automa-tion controller, in the local WiFi network, as well as through a cloud service, from everywhere the User has Internet access. Shelly® has an integrated web server, through which the User may adjust, control and monitor the Device. Shelly® has two WiFi modes – Access Point (AP) and Client Mode (CM). To op-erate in Client Mode, a WiFi router must be located within the range of the device. Shelly® devices can communicate directly with other WiFi devices through HTTP protocol. An API can be provided by the Manufacturer. Shelly® de-vices may be available for monitor and control even if the User is outside the range of the local WiFi network, as long as the WiFi router is connected to the Internet. The Shelly Cloud function could be used, which is activated through the web server of the Device or through the settings in the Shelly Cloud mobile application. The User can register and access the Shelly Cloud, using either Android or iOS mo-bile applications, or any internet browser and the web site: https://my.shelly.cloud/.

Installation Instructions

  • CAUTION! Danger of electrocution. Before installing the De-vice into the light socket please check if it has been powered off.
  • CAUTION! Use the Device only with a power grid which complies with all applicable regulations. A short circuit in the power grid connected to the Device may damage the Device.
  • CAUTION! Please check the working voltage of the device and the supplied voltage of your power grid before installing the device! Installing the device to a non-recommended power supply may lead to malfunction, danger to your life or violation of the law. Allterco Robotics is not responsible for any loss or damage in case of incorrect installation or operation of this device.
  • RECOMMENDATION! The Device may be connected to and may control electric circuits and light sockets only if they comply with the respective standards and safety norms.

Declaration of conformity
Hereby, Allterco Robotics EOOD declares that the radio equip-ment type Shelly Vintage A60/A19, ST64/ST21, G125/G40 is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/UE. The full text of the EU declaration of conformi-ty is available at the following internet address
https://shelly.cloud/knowledge-base/devices/shelly-vintage/Manufacturer: Allterco Robotics EOOD
Address: Bulgaria, Sofia, 1407, 103 Cherni vrah Blvd.

  • Tel.: +359 2 988 7435
  • E-mail: [email protected]
  • Web: http://www.shelly.cloud
    Changes in the contact data are published by the Manufacturer at the official website of the Device http://www.shelly.cloud All rights to trademarks She® and Shelly® , and other intellectual rights associated with this Device belong to Allterco Robotics EOOD.