HAYLOU GT1 XR Truly Wireless Earbuds User Manual
Overview
What’s in the Box
Eartips X 3 pairs (medium eartips have been assembled), earbuds, charging case, USB cable, user manual
How to wear
When calling, adjust Mic towards mouth to gain better talking experience.
How to Charge
Prior to using,please peel off sticker covering the pogo pins and top up both earbuds and charging case.
Power-on
Open lid to power on earbuds.
If earbuds are out of case, keep touching both panels for 2s to power on(LED glows solid white)
Power-off
Close lid to power off earbuds.
Keep touching panels for 4s to power off ( LED glows solid red for 2s).
How to Pair?
1)Automatically Pair
- Take two earbuds out from the charging case simultaneously, then open the Bluetooth device search “Haylou GRI XR R ” or Haylou GTI XR L” , finally click it to complete the connection;
- Wait for about 2 seconds, the device interface pops up prompting to pair the other side of the earbud, and click on the pairing connection;
- After the first connection, the earbuds can be automatically connected to the latest paired device (Bluetooth needs to be turned on).
Note: Put the earbuds back to the charging case and repeat the above operation if the connection tails.
2) App connection
- Scan the 9R code on the package or below to download the “Haylou ‘ App in the App Store or Google Play;
- When connecting to the App for the first time turn on the charging case without taking out the earbuds, and keep the Bluetooth of the device turned on;
- Open the”Haylou” App, select “Add Device” on the device page, and follow the page prompts to complete the search
3) Earbuds pop-up window function
- Open the ‘Haylou” App and login the App;
- Open the earbud case, the pop-up window will appear on the phone;
- Click connection, and the pairing prompt of phone Bluetooth and earbuds will pop up. Complete the paring according to the prompt;
- The earbuds are paired with phone Bluetooth and connected successfully. Click “More Settings” on the pop-up window, the App successfully binds the earbuds.
Notes:
- Whenever instructions in App diverge from the above steps, please follow the instructions in the App;
- Keep the charging case and earbuds fully charged and the Bluetooth function is open on the Bluetooth device.
- iOS device does not support pop-up window animation.
Mono Mode
Auto pairing: take out one earbud from the case to power on it. Its LED will soon blink white promptly then search for Haylou GTI XR R/L on cellphone and tap to connect. Once powering on, earbud will auto reconnect to last device in connectivity records, if any (Bluetooth faculty has to be activated).
Manual pairing : manually power on one earbud. Its LED will soon blink white flash then search for it on cellphone and tap to connect.
Basic Parameters
- Operation range: 10m(with no obstacle)
- Battery capacity: 43mAh(single earbud)
- Charging time: approx. 1.5hr
- Calling time: approx. 4hr
- Standby time: approx. 130hr
- Input parameter: 5V
100mA - Battery type: li-ion
- Bluetooth version: 5.0
Charging Case
- Input parameter: 5V 500mA
- Output para meter: 5V 150mA
- Charging time: approx. 3hr
- Standby time: approx. 4 months
- Battery capacity: 800mAh
- Battery type: li-ion
All technical data are subject to practical performance
Functions
Switch Between Mono Mode and Stereo Mode
Pick up two earbuds to auto enter stereo mode and push one back to enter mono mode. Or you can pick it up again to resume stereo mode.
LEDs on Charging Case
Whenever you open/close lid, four LEDs will blink 3 times then some/all of them will glow solid for IOS according to practical battery level.
Low battery warning(carry case): If battery level is under 25%, LED for low battery warning will keep blinking white 3 times in I minute.
Battery level display
When charging, four LEDs will blink 3 times with draw marquee effect then some/all of them glow solid according to practical charging status.
Battery level display in charging
Caveats
- Please charge the product, in case it has not been used over two weeks.
- Please use certified charger.
- Do not wear earphones for a long term to protect your hearing.
- Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world.
If any malfunction emerges in the earbuds, please refer the following steps:
Factory setting: put earbuds into case to charge them then keep touching earbuds for IOS or until LEDs blink red and white 3 times to set them to factory. They will then auto power on and get charged. Pick up two earbuds(LEDs will blink red and white quickly) and they will auto pair with each other. Earbuds will auto turn to be connectable to phone when LED on left earbud turns off and LED on right earbud blinks white promptly. Delete connectivity record in device and reconnect the earbuds to phone.
Audio only outputs from single earbud
It’s really rare. Please reset GTI XR , remove connectivity record on your cellphone and re-connect the earphones to your cellphone.
Other cases in charging
LED glows solid white for I minute when earbuds are topped up.
Carry case cannot charge earbuds, if its battery drains. LEDS on carry case will turn off once the case is topped up.
Daily maintenance
Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth after use in pursuing a longer service life.
Tips
- Before using the headset, please read the manual carefully and keep it for future references.
- The headset need to be fully charged prior to first-time use.
- If the headset is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by qualified manufacturer.
- If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.
Address: Suite 1303, 1305 and 1306, 13/F, Project Phase
2 of Gaosheng Tech Tower, Gaosheng Tech Park,
No.5 Longxi Road, Zhouxi Community, Nancheng
District, Dongguan City, Guangdong, China.
Manufacturer: Dongguan Liesheng Electronics Co., Ltd.
Web: www.haylou.com
Made In China
Hazardous substances and their contents in the item
This form is made by SJ/T 11364 regulation.
O: means that hazardous substance content in the homogeneous materials of this part is within the limits of GB/T 26572 regulation.
X: means that hazardous substance content in, at least, one certain homogeneous material of this part is beyond the limits of GB/T 26572 regulation.
Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Warranty Card
Warranty Period
12 months after the next day receiving this item.
Free exchange service will not be accessed under following circumstances:
- Damages caused by unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God.Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
