Hitron CDA-30360 router manual

Hitron CDA-30360 router


Modem Information DOCSIS 3.0 modem 8×4 channel bonding with speeds of up to 150 Mbps on a wired connection Cox recommends a DOCSIS 3.1 modem or gateway	Highest Service Level Preferred 150

DOCSIS 3.0 modem

8×4 channel bonding with speeds of up to 150 Mbps on a wired connection

Cox recommends a DOCSIS 3.1 modem or gateway

Preferred 150


Front View Click to enlarge.		The Hitron CDA 30360 Cable Modem is a DOCSIS 3.0 cable modem. After the cable modem is successfully registered on the network, the Power and Status indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.

Back View Click to enlarge.		The Hitron CDA 30360 has the following ports available on the back of the modem: POWER – Connects the cable modem to the power adapter CATV – Connects to the cable wall outlet ETH – Connects to the Ethernet port on your computer or home network

MAC Address Click to enlarge.		MAC addresses are written as 12 digits containing both letters and numbers (0-9, A-F). A MAC address is unique. The first six characters of the MAC address are unique to the manufacturer of the device.

The modem lights indicate the current status of your gateway. To troubleshoot any connection problems, use the table below.

Modem Light	Status	Problem
Downstream	Green Blinking	Establishing a connection from the Internet to the computer Solution: Verify all cable connections and try resetting the modem. If cable is ok and modem reset does not work, contact Customer Support.
	Solid Green	None – connection with one download frequency
	Solid Blue	None – connection with multiple download frequencies, known as channel bonding
Upstream	Off	Establishing a connection from the computer to the Internet Solution: Verify all cable connections and try resetting the modem. If cable is ok and modem reset does not work, contact Customer Support.
	Solid Green	None – connection with one upload frequency
	Solid Blue	None – connection with multiple upload frequencies, known as channel bonding
Status	Green Blinking	Establishing a connection to the cable provider Solution: Verify all cable connections and try resetting the modem. (login/Reset instructions) If cable is ok and modem reset does not work, contact Customer Support.
	Solid Green	None – connection established
	Solid Blue	None – connection established
LAN	Green Blinking	None – data flowing between the computer and the Internet
	Solid Green	None – connected to LAN device, such as a computer or router
	Solid Blue	None – connected to LAN device, such as a computer or router