Loading manuals...

HMS Wireless Router 4G Manual

HMS Wireless Router 4G Manual Image

HMS Wireless Router 4G

Product Overview


Standard 3GPP 4G LTE Release 15.
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet copper
IEEE 802.3x Flow Control and back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
ITU-T G.8032 version 2 Ethernet ring protection switching(ERPSv2)
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1Q-2005 Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1X Port based Network Access Protocol
IEEE 1588 Precision Time Protocol v2
IEEE 802.3af/at Power-over-Ethernet


Ethernet Port LAN: 8x 10/100/1000Base-T RJ45, Auto Negotiation, Auto MDI/MDI-X, with 4x IEEE 802.3af/at PoE/PoE+
WAN: 2x 100/1000Base-T RJ45, Auto Negotiation, Auto MDI/MDI-X
System LED 1 x Ring: Off: Ring disabled, Green On: Ring normal (Not RPL Owner), Green Blinking: Ring normal (RPL Owner), Amber On: Ring abnormal, Amber Blinking: Ring port fail
1 x DO (Red)
1 x Power (Green)
2 x Cellular(LTE) (Green),
Ra: SIM detected: Green On, SIM not inserted: Off Rb: LTE connection: Green On, disconnected: Off 1 x WLAN (Green, WLAN version only),
Rc: AP mode: Green On, Station mode connected: Green Blinking, Station mode/radio disable: Off 1 x System (Green)
4 x PoE (Green, PoE model only)
Ethernet Port LED Link (Green On), Activity (Green Blinking), Speed 1000M(Amber On), Speed 100M(Off)
Reset System Reset (2~6 Seconds) / Default Settings Reset (over 7 Seconds)
SMA Connector 4x SMA Female socket for LTE Antennas
SIM Socket 2x 4FF Nano SIM
Power Input, Digital Output 4-Pin Removable terminal block connector, grey with lock 2 Pin for power Input
2 Pin for relay
DO: Dry relay output with 0.5A/24V DC

Cellular Properties

Standard 4G Multi-mode, 3GPP Rel.15 LTE Cat.20
Frequency Bands LTE FDD B1/B3/B7/B20
LTE TDD B38/B42/B43
Other bands available on request


Management CGI WebGUI, Command Line Interface (CLI), IPv4/, Telnet, SNMP v1/v2c/v3, RMON, LLDP, DHCP server/client/Option 82, TFTP, System Log, SMTP
Traffic Management Flow Control, Rate Control, Port Mirror, CoS, QoS, RFC 2474 DiffServ
Filter IGMP Snooping v1/v2/v3, IGMP Snooping, IGMP Query, GMRP, IEEE802.1Q VLAN, QinQ, GVRP, Private VLAN
Security IEEE 802.1X/RADIUS, TLS v1.2, HTTPs/SSH, First login password management
Advanced Security TACACS+, Mutli-user authentication, IEEE802.1x MAB, DHCP Snooping/IPSG, Dynamic ARP inspection, SFTP
Redundancy ERPSv2 (HW-based CFM), STP/RSTP/MSTP, Port Trunk/LACP
Time Management NTP, IEEE 1588 Precision Time Protocol v2
WAN/Routing/NAT/Firewall/ VPN Throughput of WAN ports routing: 70 Mbps Dual WAN Interface (Port 9-10)
Routing: RIPv2, OSPFv2, VRRPv2, *Static Multicast Route NAT: 1-1 NAT, NAPT(SNAT/DNAT)
Cellular: “Routing behind MS”, “passthrough” Firewall: Stateful Inspection firewall, DMZ VPN: IPSec, OpenVPN, GRE, L2TP
Cellular Configuration Radio on/off, 4G LTE Configuration, SIM Security, Connection Status, Cellular Time

Power Requirement

Input Voltage 24VDC (9.6-57 VDC for both PoE/Non-PoE models)
Reverse Polarity Protect Yes
Input Current 5.54A@24VDC with 120W PD loading
Power Consumption Max 12W@24VDC full traffic without PD Loading


Power forwarding mode Alternative A
PoE Power Budget System: Max. 60W@70°C/12V, 120W@70°C/24V,
Per Port: Max. 30W
PoE Standard IEEE 802.3af/at
Management PoE Enable/Disable, System/Port Power Budget Control, PoE Scheduling, PoE Status


Installation Wall mount/Din rail mount
Enclosure Material Steel Metal with Aluminum
Dimension 200x 55 x 126 (W x H x D) / without Mounting Clip
Ingress Protection IP30
Weight ~1500g without package


Operating Temperature & Humidity -40°C~70°C , 5%~95% Non- Condensing
Storage Temperature -40°C~85°C
MTBF >200,000 hours

CE Conformance

Safety EN62368-1(LVD)
Radio EN62311 EN301908-1/13
EMC EN301489-1/52 EN61000-6-2/4 EN55032/55035, Class A EN55016-2-3, Class A

Ordering Information

Model Name NV1004 Wireless Router 4G
Package List 1 x Product Unit
1 x 4-pin Removable Terminal Block Connector
1 x Wall mounting kit
4 x Antennas
Accessories E-014 Power supply including EU, UK and USA plug