Loading manuals...

INSIGNIA NS-PCYTC55 Thermal Compound manual


INSIGNIA NS-PCYTC55 Thermal Compound manual Image

Thermal Compound Quick Setup Guide

PACKAGE CONTENTS

  • Insignia thermal compound
  • Applicator
  • Quick Setup Guide

INTRODUCTION

Insignia NS-PCYTC55 thermal conductive compound is a grease-like, silicone material, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed, and hightemperature stability. This compound resists changes in consistency at temperatures up to 572°F (300°C), maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis which increases the overall efficiency of the device.

PRODUCT FEATURES

  • Suitable for CPU, chipsets on main board, VGA card, and similar devices
  • Applicator for spreading the grease in an even layer
  • Wide range of application temperature and dielectric uses

TO APPLY THE COMPOUND

  1. Make sure that the CPU die or heat spreader is completely clean of residue. If necessary, use isopropyl alcohol to clean the surface.
  2. Apply a small amount the compound to heat sink or CPU or both, then slide the applicator across the compound to create a thin, even layer. Repeat, if necessary.
  3. Install the heat sink.

Before using your new product, please read these instructions to prevent any damage.

Caution: This product has been developed and manufactured for general industrial use. For other uses where safety considerations may be required, you must in advance test and review the safety of your intended application. Moreover, this product is not for human implant nor human injection, nor use for applications which may present risk of accumulating inside human bodies. Do not ingest. Avoid Contact with eyes and skin. Keep out of reach of children.

ONE-YEAR LIMITED WARRANTY

For complete warranty, visit www.insigniaproducts.com.

CONTACT INSIGNIA

For customer service, call 877-467-4289 (U.S.) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China



More Manuals From Insignia