Everest 300/700
Quick Start Guide
Overview – Buttons and LEDs
2 To turn on Bluetooth to pair
3 To pair Bluetooth with the device
LED behaviors
4. To turn off Bluetooth radio when battery is low. Listen to music using audio cable
Connectors in Everest right earcups
5. To use ShareMe™ 2.0
To use ShareMe™ 2.0
ShareMe 2.0 enables sharing
your audio with another set of
Bluetooth wireless headphones
of any brand.
Step 1: Pair and connect JBL Everest headphone to a source device
Step 2: Pause music or disengage the voice call from the source device
Step 3: Press “ShareMe 2.0” button, the white LED starts blinking. JBL Everest headphone is ready to connect to the other headphone.
Step 4: Turn on the Bluetooth pairing function in the other headphone. Keep both headphones near each other. The white LED stops flashing and remains lit after two headphones connect.
Step 5: Press the play button in the source device to share audio between two headphones.
Step 6: Press “ShareMe 2.0” button to turn off this feature. The white LED is off.
6 To charge battery
7 Adjust Volume
8 Multi-function Button (MFB) to control music
9 Multi-function Button (MFB) to skip track
10 Multi-function Button (MFB) to control calls
12 Multi-function Button (MFB) to manage 2 calls at the same time
JBL Everest 700 (AE BT)
Model: V700BT
Drive size: 40mm
Dynamic frequency response range: 10Hz-22kHz
Driver sensitivity: 102dB/1kHz1mW
Maximum SPL: 117dB
Rated power input: 30mW
Microphone sensitivity: -42dBV/Pa
Bluetooth® transmitted power: <4dBm
Bluetooth® transmitted modulation: GFSK π/4, DQPSK, 8-DPSK
Bluetooth® spec: 4.1
Bluetooth® profiles: A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2
Battery type: Polymer Li-ion Battery (3.7V, 850mAh)
Charging time: 3 hours
Music play time: up to 25 hours
Talk time: up to 25 hours
Dimension WxHxL(mm): 76.9×176.5×169.5
Weight (kg): 0.2736
