JBL Under Armour True Wireless Flash Headphones Manual
1. WHAT’S IN THE BOX
UA True Wireless Flash
Charging Case
Charging Cable
Sport Fit Ear Tips & Freebit Enhancers
Quick Start Guide, Safety sheet, Warranty card, Warning card, and UA MapMyRun 12-Month Premium Membership card
2. OVERVIEW
Buttons and LEDs
Charging
Headphones automatically charge in case.
DO NOT put wet headphones into case.
3. WEARING THE HEADPHONE
Select the ear tips and Freebit enhancers that provide the most secure fit and provide the best seal for sound.
4. BLUETOOTH PAIRING
4.1 Pairing for the first time
Remove the Right ear bud from the case. It will automatically power on and enter pairing mode.
4.2 Connect to Bluetooth device
4.3 Remove the Left headphone from the case. It will automatically sync to the Right headphone.
4.4 After first time set up, your headphones will automatically reconnect when removed from the case if your device is nearby with Bluetooth ON.
4.5 To connect to a new device, begin with the headphones powered off, and hold the button on the Right headphone for 5 seconds to enter Pairing mode.
5. POWER
5.1 Power On
5.2 Power Off
Place headphones in case to automatically power off and charge, or manually power off both headphones simultaneously.
6. CONTROLLING MUSIC
7. MANAGING PHONE CALLS
8. MANUALLY SYNCING
If the Left headphone becomes disconnected from the Right, you may need to manually Sync. Ensure both headphones are powered on. Triple press the button on each headphone, starting with the Right, to enter Sync Mode. Once successfully synced, the LED on each will fade in/out blue simultaneously.
9. VOICE ASSISTANT
10. BIONIC HEARING
10.1 TalkThru Technology:
Short press once to activate TalkThru, which allows you to clearly hear others for quick conversations, without removing your headphones. You will hear your music volume level lower when TalkThru is engaged. Press again to turn off TalkThru.
10.2 Ambient Aware:
Double press to activate Ambient Aware, which allows you to hear your surroundings. Double press again to turn off Ambient Aware.
11. LED BEHAVIORS
IC RF Exposure Information and Statement
The SAR limit of Canada (IC) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-UAFLASH) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.015W / kg.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna. IC: 6132A-UAFLASH
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
