JLABAUDIO JBuds Air Sport Earbuds User Manual

JBUDS AIR SPORT EARBUDS

We love that you are rocking JLab Audio!

We take pride in our products and fully stand behind them.

YOUR SATISFACTION IS GUARANTEED

You may exchange or return merchandise within 30 days of the purchase date.

Learn more at jlabaudio.com/guarantee

YOUR WARRANTY

You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US

Reach out to us at or visit jlabaudio.com/contact

FIRST TIME SETUP

1. AUTO-CONNECTING EARBUDS
   A. Take earbuds out of the charging case and remove stickers.
   B. Press and hold both touch sensors 3+ seconds to turn ON.
   The left earbud turns solid white and the Right earbud blinks blue/white indicating ready to pair to your device.
   
2. CONNECTING TO BLUETOOTH
   Select “JLab JBuds Air Sport” in your device settings.
   Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.
   

ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:

Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from the new device. Take earbuds out of the case.

Earbuds will automatically enter Bluetooth Pairing. Select “JLab JBuds Air Sport” in device settings to connect.

IN THE BOX

BUTTON FUNCTIONS

VOLUME DOWN: Single tap. SIRI (iOS) or “OK GOOGLE” (ANDROID): Double-tap. TRACKBACK: Press & hold 1+ sec. EQ CHANGE: Triple tap. (JBuds Air The sport will cycle 3 EQ settings) POWER ON: Press & hold 3+ sec.

VOLUME UP: Single tap. PLAY / PAUSE: Double-tap. TRACK FORWARD: Press & hold 1+ sec. ANSWER: Single tap. HANG UP: Double-tap. REJECT INCOMING CALLS: Press & hold 1+ sec. BE AWARE ON / OFF: Triple tap. POWER ON: Press & hold 3+ sec.

• “Hello”: Power ON
• “Earbuds joined”: Earbuds paired to each other
• “Ready to Pair”: JBuds Air Sport are ready to pair to Bluetooth device
• “Bluetooth Connected”: Earbud is connected to the device
• “Battery Full”: 100-80%
• “Battery Medium”: 80-20%
  “Low Battery”: Less than 20%
  When power decreases to 10%,
  “Low Battery” will play
• “Goodbye”: Power OFF

TURN OFF EARBUDS WITHOUT CHARGING CASE:

Enter your Bluetooth device settings and disconnect the JBuds Air Sport. Earbuds will power OFF after 3 minutes.

EQUALIZER MODES

Triple tap left earbud for different EQ settings. Voice prompts will indicate EQ settings (JBuds Air Sport will cycle 3 EQ settings)

CHARGING EARBUDS

1. Placing the earbuds in the charging case will power off the earbuds and start charging. Blue lights indicate earbuds are charging and will turn off when fully charged.
2. When earbuds are taken out of the case, they will auto power on and reconnect to your device.

CHARGING CASE

Connect the JBuds Air Sport to a computer or USB 5V 1A (or less) output device.

FITTING

TROUBLESHOOTING

NO AUDIO IN LEFT EARBUD OR EARBUDS DISCONNECT FROM EACH OTHER (MANUAL RESET)

• Enter your Bluetooth device settings and forget the JBuds Air Sport. Fig A
  
• Open the charging case door and leave both earbuds inside. Starting with ONE earbud, quickly tap the touch sensor 4x times. Light will blink blue 4x times then turn solid blue. Leave the earbuds in the charging case. Fig C1
  
• Repeat with the other earbud. Quickly tap the touch sensor 4x times. 
  Light will blink blue 4x times then turn solid blue. Fig C2
  
• Take both earbuds out of the charging case and keep them within 2 inches from each other. Wait for the Left earbud to turn solid white and the Right to blink blue/white. You are now ready to pair to your Bluetooth device.

BLUETOOTH DEVICE DOES NOT CONNECT/RECONNECT

1. Enter your Bluetooth device settings and forget the JBuds Air Sport. Fig A
2. Turn OFF then ON Bluetooth. Fig B
   
3. Take the earbuds out of the case. Wait for Left to turn solid white and Right blinking blue/white.
4. Select “JLab JBuds Air Sport” in device settings to reconnect.

QUICK TIPS

• The Bluetooth connection is established from the right earbud. For the most stable connection, keep the device near the right-hand side or in the right pocket.
• If you prefer to wear only one earbud, you must wear the right earbud as this is the main earbud connected to Bluetooth.
• Choosing the correct ear tip makes a significant improvement in audio quality due to the proper seal for the driver. Test all ear tips for best results.
• Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on the chosen device to connect.

WARNING

Fully dry off the earbuds before placing them in the charging case.

If the earbuds are damp or wet, this will cause damage to the charging case. The warranty will be voided if the charging case shows damage by water/sweat.

WARM-UP YOUR HEADPHONES

Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone driver. Normal, everyday use can also burn in the headphones through JLab’s proprietary burn-in provides an ideal mix of sounds and frequency sweeps to achieve this.

Burn in your audio equipment with the JLab Audio app available on the App Store and Google Play.

Or access the burn-in method at: jlabaudio.com/burnin

CAUTIONS

• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering the sound quality.
  Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in a safe location when not in use.

Instructional videos at: JLABAUDIO.COM

Download PDF Manual

You can download the original PDF version that this HTML manual has been created using by clicking the button below:

Download PDF Manual