LP40
Lenovo LivePods
TWS WIRELESS EARPHONES
USER MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE
Specification
Bluetooth Version: V5.0
Working Range: Up to 10m
Speaker size: Φ13mm
Impedance: 32
Mic Type: Silicon Microphone(MEMS Microphone)
Mic Sensitivity: -32dB ± 3dB
Speaker Power: 20mW*2
S/N Rate: ≥70DB
THD: ≤5%
Frequency Response: 20Hz-20KHz
Playing time: approx. 2.5h
Earphone battery: 35mAh
Charge case battery: 230mAh
( All technical data is subject to actual performance)
In the box
Bluetooth Earphone x 2
Charge Cable x 1
Charge Case x 1
Manual x 1
Usage Instruction
- Don’t attempt to disassemble the unit and change any part, except there is an operation method mentioned in the manual.
- Don’t expose the unit to liquid, moisture, or humidity, since it is not a waterproof product.
- Disconnect the unit with your Bluetooth device and move it to the safe area if the liquid gets inside the unit.
- Don’t assemble or disassemble the unit to avoid electric shock if there is water on your hands.
- Don’t expose the unit to extremely high temperatures or dispose of the unit in the fire as it will result in an explosion.
- Don’t place the unit in an electromagnetic interference environment to avoid malfunction.
Operation Instruction
- Turn On:
Method 1: Bring both earphones out from the charging case, the earphones will turn on automatically, Method Press and hold on the MF button 2s to turn on the earphones
Note: When the earphone is undercharging, it can not be turned on. - Turn Off:
Method 1: Press and hold on to the MF button 3s to turn off the earphone. Method 2: Put the earphone back into the charge case, the earphone will turn off automatically.
Note: The earphones will turn off if it has not received a signal for approx.5 minutes.
The earphones will turn off if the distance exceeds 10-12M and no signal is received within approx. 5 minutes. - TWS Pairing ( R & L earphones TWS Pairing)
Bring both earphones out from the charging case, the earphones will automatically turn on and pair with each other successfully within 5s. Note: If R & L earphones do not pair successfully after turning on for a while, press and hold on the MF button on both earphones Ss to turn off the earphones. Then turn on both earphones again, they will pair with each other automatically. - Two earbuds automatic switch:
After left and right earbuds are paired, anyone earbuds put in the charging case, will turn off. The earbud is not put in the charging case, still works normally. - Connect with bluetooth:
Turn on the device of Bluetooth and find “Lenovo LP40” to pair. - Playing music T
urn on the device of bluetooth and find “Lenovo LP40” to pair. Previous track: Short press the MF button of the left Earpod 3 times will return you to the previous track Next track: Short press the MF button of right Earpod 3 times will take you to the next track Increase Volume: Short press the MF button of right Earpod 2 times to increase the volume Decrease Volume: Short press the MF button of left Earpod 2 times to decrease the volume Pause/Play: Short press the MF button of one Earpod will resume the music - Hands-free function (two earbuds paired)
Answer an incoming call: Short press the MF button of any Earpod to answer an incoming call. Reject Incoming Call: Press the MF button of any Earpod for 2 seconds and release End call: After your phone conversation, Short press the M F button of any Earpod. - Handsfree function (Single earbud )
Answer an incoming call: Short press the MF button of any Earpod to answer an incoming call. Reject Incoming Call: Press the MF button of any Earpod for 2 seconds and release End call: After your phone conversation, Short press the M F button of any Earpod. - Active SIRI voice assistant:(Only support IOS system)
Activate voice assistant: touch the Multi-function button for 1.5s to turn on. Turn off voice assistant: after activating the voice function, short press the button for 1.5S to turn off. - Charging earbuds
when earbuds are put in the charging case, No indicator light, The charging case with green light, shows normal charging. - Charge the charging case
Charge the charging case, it flashes a red light. After a full charge, the red light is always on.
Name and content of hazardous substances in products
| Part Name | ||||||
| Harmful materials | ||||||
| Pb | Hg | Cd | Cr(VI) | PBB | PBDE | |
| Printed circuit assembly | x | 0 | 0 | 0 | 0 | 0 |
| Small structural parts such as shell | 0 | 0 | 0 | 0 | 0 | |
This form is compiled in accordance with SJ/T 11364. 0: Indicates that the content of the hazardous
substance in all homogeneous materials of the part is Below the limit requirements specified in GB/T 26572.
x : Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds
The limit requirements are specified in GB/T 26572.
The parts marked with “X” on the form are all harmful due to the limitations of global technological development. Substitution of substances.
Printed circuit board components*: including printed circuit boards and their parts, electronic components, etc., Depending on the product model, the product you purchased may not contain all the above components
Electronic and electrical products sold in the People’s Republic of China must mark this Logo, the number in the logo represents the product under normal use Environmental protection use period.
Warranty statement
This user manual does not have any form of guarantee, Disclaimer position expression, or other implication. The mentioned products, specifications, and information are for reference only, and the content will also be updated on the webpage at any time, without additional line notification. Warranty Statement: The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase (“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired free; if the manufacturer confirms that it cannot be repaired, free replacement; repaired or replaced product, Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchase date by sale The ticket date shall prevail; if the purchase date cannot be determined, the warranty period shall be 13 Months of calculation. If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for a warranty, you need to provide an accurate, complete, and clearly filled out valid sales invoice. The above guarantee does not apply to the following situations:
- The validity period of the three packs is exceeded;
- Alteration of the warranty card and product code does not match the product body;
- Causes caused by misuse, abuse, or improper transportation, use, maintenance, or storage impaired or damaged;
- Failure or damage caused by force majeure (such as earthquake, war, fire, etc.) or accident bad; 5. The zipper and buckle are damaged due to excessive force;
