LG SL4Y 2.1 Channel 300W Sound Bar w-Bluetooth Streaming Manual

in the box

Front Panel

(Standby)
·Switches the unit ON or OFF.
F (Function)
Selects function.
p/o (Volume)
Adjusts volume.

Rear Panel

DC IN
Connect to the AC adapter.
OPTICAL IN
Connect to an optical device.
USB Port
Connect to a USB device.

Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.

Subwoofer Connection

Place the wireless subwoofer near the soundbar and follow the steps below.

Connect the power cord of the soundbar and the wireless subwoofer to the outlet.
Turn on the soundbar.
1. The soundbar and wireless subwoofer will be automatically connected. The subwoofer’s yellow-green LED turns on.

Manual Subwoofer Connection

If the subwoofer does not make a sound, try to connect manually.

Press PAIRING on the rear of the wireless subwoofer.
1. The yellow-green LED on the front of the wireless subwoofer blinks quickly.
  (If the yellow-green LED does not blink, press and hold the PAIRING.)
Turn on the soundbar.
1. Pairing is completed. The yellow – green LED on the front of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.

TV Connection

Connect the soundbar to the TV using an Optical cable.
Set up [External Speaker (Optical)] on your TV

Additional Device Connection

Connect to the external device like as follow.
Set the input source by pressing F repeatedly.

Remote control

Replacement of Battery

C/V: Skip/Search
N: Play/Pause
- Bluetooth connection lock (BT LOCK): Select the Bluetooth function by pressing F repeatedly. Long press N and press it again to limit Bluetooth connection to only BT and LG TV. SOUND
EFFECT: Selects a sound effect mode.
- TV remote: Long press SOUND EFFECT and
  press it again to use TV remote control.
FOLDER W/S: Searches a folder.
Displays the information of a file, an input source or a connected Bluetooth device name.
- Auto Power ON/OFF: Long press J and press it again: Adjusts sound level of each speaker.
- Surround sound: Long press and press it again.
REPEAT: Listens to your files repeatedly or randomly.

Additional Information

Specification

Refer to the main label.

Power consumption
Networked standby: 0.5 W (If all network ports are activated.)
- Model : DA-38A25
- Manufacturer : Asian Power Devices Inc.
- Input : 100 – 240 V ~50 – 60 Hz
- Output : 25 V 0 1.52 A
AC adapter
- Model : MS-Z1520R250-038A0-P
- Manufacturer : MOSO POWER SUPPLY TECHNOLOGY CO., LTD.
- Input : 100 – 240 V ~ 50/60 Hz
- Output : 25 V 0 1.52 A
Dimensions
Approx. 890.0 mm X 57.0 mm X
(W x H x D)
85.0 mm With foot
Bus Power Supply (USB)
5 V 0 500 mA
Amplifier (Total RMS Output power)
300 W RMS

Design and specifications are subject to change without notice.

How to disconnect the wireless network connection or the wireless device

Set up the AUTO POWER ON/OFF function to off and turn off the unit.

Rear Speakers Ready

Ready for surround sound with
Rear Speakers Kit sold separately. (SPK8-S)

Declaration of Conformity

Hereby, LG Electronics declares that the radio equipment type Wireless Sound Bar is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For the consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.