luxorparts Distance meter User Manual
www.luxorparts.com
Box 50435, Malmö, Sweden
Version: 2020-06-18
Luxorparts®
Overview
Diagramming
Switching On and Off
Measurement Function
Switch measurement unit
Selecting reference level
Backlight function
Memory function
Deleting saved values
Press the button OFF CLEAR, it will delete last measured value in all measuring functions.
Continuous Measurement (Tracking)
Adding/Subtracting Value
Adding/Subtracting values function can be used on distance, area, volume, Pythagoras measurements.
Adding Value
The following example describes the adding of areas:
- Press the button to start the first measurement of area value as described in section “Area Measurement”.- Image 1
- Press the button”+”, symbol “+” will show on the scree.- image 2
- Press the button to start the second area measurement as described in section “Area Measurement”, once the second measurement is completed, the result of the second area measurement will be displayed on the result line.- Image 3
- To show the final result, press the measurement button once more, the accumulated value will show on the result line. – image 4
Subtracting Value
To subtract values, press the button”-“. The subsequent steps are similar to “Adding Values”.
Other supplementary function settings
Measurement accuracy compensation function
- Long press the laser button for about 4 seconds when the product is off to enter the measurement accuracy compensation function.
- Press the laser button for about 2 seconds to enter the measurement accuracy compensation function setting screen. (CRL-7mm to CRL.7mm)
- Select the value from CRL-7 to CRL.7 according to the value you want to subtract or increase. (For example: the length you measured is 3 meters, and the measured value is 3.001 meters, then you can choose CRL-1, and the value measured again will be 3 meters. If you need to add or subtract other values, use the same Method of operation.)
Sound off/on
From the measurement accuracy compensation screen (any number from CRL-7 to CRL.7 is displayed on the screen), press the laser key for about 2 seconds to enter the sound off or on function. “BP, ON” means the sound is turned on, press the laser key again “BP.OFF” means the sound is turned off.
(According to your actual need to set to turn off or turn on the sound, press the laser key for about 2 seconds or press “OFF/CLEAR” key to save the setting.)
Backlight off/on function
From the sound on/off page, press the laser button for about 2 seconds to enter the backlight on/off function, “BL.ON” means the backlight is turned on, and press the laser key “BL.OFF” again to turn off the backlight, Turn off ort urn on the backlight. When setting to turn off the backlight, press the “OFF CLEAR” key to save and need to restart the product to take effect, but when setting to turn on the backlight, press the “OFF CLEAR” key and then press any key to take effect)
Precautions
Under the measurement accuracy compensation function, long press the laser button for about 2 seconds to enter the sound off and on function (when you press the laser button for about 2 seconds to enter the next function setting, the function you set in the previous function will be automatically saved , You can also press “OFF CLEAR” to save).The sound off and on function is also saved when entering the backlight on and off function.
However, the backlight off/on function has special operations. When setting to turn off the backlight, press the “OFF CLEAR” button to save and need to restart the product to take effect, but when setting to turn on the backlight, press any key to take effect. So please carefully confirm whether each function you set is what you need during operation to avoid mistakes.
On the backlight on/off page, long press the laser button for about 2 seconds or press “OFF CLEAR” to enter the length measurement screen (Please do not long press “OFF CLEAR” button will shut down).
Information
During the using of device, the following information may appear in the main display area: If our products have the following situations, please refer to the following instructions (Note: the abbreviations of these words are for users’ reference and may not appear in actual products)
