MAXSISUN PB2000 Pro Remote Control LED Grow Light User Manual
Safety Information
Dear Customer
Thank you for shopping with MAXSISUN. Please read and follow the instructions below before installing and using your light. If you have any concerns, please contact us via [email protected].
Safety Warnings and Recommendations:
- Do NOT use a damaged power cord.
- Do NOT look directly at the LED bulbs when the light is operating.
- Do NOT use the light near flammable, explosive or reactive substances.
- Do NOT attempt to open, rewire or reconfigure any components of the light system. It will void the warranty and could cause severe injury or death.
- Hang light securely so that it cannot fall.
- Only use the supplied power cord comes with the light.
- Indoor use only. The light is certified for use in damp and dry locations.
- Always disconnect power from the light before moving or cleaning it.
- Check and adhere to all local rules and regulations when installing.
- The minimum required distances between lights is 4 inches (10cm), and between the light and combustible materials is 16 inches (40cm) such as walls, ceilings, movable partitions, and the like.
- The maximum temperature of the installed environment that will ensure safe operation of the light. A mechanical ventilation or cooling system is required to maintain the temperature within the growing space below 104°F (or 40°C) when the light is operating.
Cleaning
Disconnect the power cord. Using a clean, soft, lint-free cloth to wipe the light. Please be aware of getting moisture or damage in any openings.
Legal Disclaimer:
MAXSISUN products are to be used for lawful purposes only. It is the responsibility of you as the purchaser to know and abide by all laws on the use of MAXSISUN products.
MAXSISUN will NOT be held liable for any unlawful state or federal activity arising out of the use of our products. By purchasing a MAXSISUN product, you agree to these terms and conditions, confirming that you, as the purchaser, are attesting to the lawful use of our product and are thereby solely responsible for acting in conformance with all applicable regulations.
Quick Start Guide
BEFORE USE
- Install batteries in the remote.
- Plug the light into an outlet. Turn off its switch.
CONNECT REMOTE TO LIGHT(S)
- Long-press [ID] and turn on the switch. The light will blinks if the connection succeeds
- PFe5S[ALL]. Select the brightness you want. Repeat for all Lights.
Tips: To save your electricity bill, please turn off the switch of the light if long time no use.
- ON: Power on the light.
- OFF: Power off the light. (Standby mode)
- All: To control all groups.
- ID: Connect remote to light.
GROUPING: SET DIFFERENT BRIGHTNESS FOR MULTIPLE LIGHTS
- Connect one remote to all lights (ex. 10 lights). Turn off their switches.
- Put 5 fig light into group 1: Long-press [1] and turn on 5 lights’ switches. These lights will blink if the connection succeeds.
- Put the rest of 5 lights into group 2: Long-press [2] and turn on their switches. These lights will blink if the connection succeeds.
- Press [1]. Select the brightness for group 1.
- Press [2]. Select the brightness for group 2.
- Press[ALL} Select the brightness or all lights.
CHANGE ONE LIGHT TO OTHER GROUP
(Ex. From Group 1 to Group 5)
- Turn off its switch.
- Long-press [5] and turn on its switch. The light will blinks if the connection succeeds.
CONNECT REMOTE TO LIGHT WHICH IS IN STANDBY MODE
- Turn off the switch over 15 seconds.
- Long-press [ID] and turn on the switch over 5 seconds. The connection will succeed.
- Press [ON] to turn on the light.
PB1000 Pro
PB1000 Pro using suggestions
| PB1000 Pro | Height (above plants’ canopy) | Using Hours | Brightness |
| 3-5 Days Acclimation Period | 24″-28″ | 18 on / 6 off | 40% |
| Seedlings/Young Vegetative | 20″-24” | 18 on / 6 off | 60% |
| Vegetative Stage | 16″-20″ | 18 on / 6 out | 100% |
| Flowering Stage | 12″-16″ | 12 on / 12 off | 100% |
PB1OOO Pro PPFD MAP – Tested in a 2×2 ft Grow Tent
PB1OOO Pro SPECTRUM
PB1000 Pro Specification
| Model: | PB1000 Pro | HID Replacement: | 200W HPS/MH |
| Feature: | Remote Control | Vegetative Coverage at 18″: | 2.5 • 2.5 ft |
| Actual Power Draw: | 1OOW*3% at J20V | Flowering Coverage at 14”: | 2 • 2 ft |
| LED Quantities: | 350pcs | Use for: | all stages grow and flowering |
| Total Harmonic Distortion: | e15% | Dimensions: | J2 x JO.8 x 2.1 inches |
| Input: | AC100-240V” 0.95A | Item Weight: | 3.9 lbs |
| Frequency: | 50-6OHz | Lifespan: | ?1OO,000 hours |
| Package Includes: |
|
||
| / | / | ||
NOTE
Extremely bright, do not stare at operating lamp.
For flowering stage: use all channels with 1009£ brightness.
This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs. For safety, total true wattage of extra connected lights MUST less than 60OW.
PB1500 Pro
PB1500 Pro Using Suggestions
| PB15OO Pro | Height (above plants’ canopy) | Using Hours | Brightness |
| 3-5 Days Acclimation Period | 26″-30″ | 18 on / 6 off | 40% |
| Seedlings/Young Vegetative | 22“-26” | 18 on / 6 off | 60% |
| Vegetative Stage | 18”-22″ | 18 on / 6 out | 100% |
| Flowering Stage | 14″-18″ | J2 on / 12 off | 100% |
PB15OO Pro PPFD MAP – Tested in a 2×2 ft Grow Tent
PB15OO Pro SPECTRUM
PB15OO Pro Specification
| Model: | PB1500 Pro | HID Replacement: | 300W HPS/MH |
| Feature: | Remote Control | Vegetative Coverage at 20″: | 3 • 3 ft |
| Actual Power Draw: | 150W13% at 12OV | Flowering Coverage at 16″: | 2.5 2.5 ft |
| LED Quantities: | 49opcs | Use for: | all stages grow and flowering |
| Total Harmonic Distortion: | e15% | Dimensions: | J6 x 10.8 x 2.4 inches |
| Input: | AC100-240V” 1.42A | Item Weight: | 6.3 lbs |
| Frequency: | 50-6OHz | Lifespan: | ?1OO,000 hours |
| Package Includes: |
|
||
| / | / | ||
NOTE:
Extremely bright, do not stare at operating lamp.
For flowering stage: use all channels with 1009£ brightness.
This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs. For safety, total true wattage of extra connected lights MUST less than 60OW.
PB2000 Pro
PB2000 Pro Using Suggestions
| PB2000 Pro | Height (above plants’ canopy) | Using Hours | Brightness |
| 3-5 Days Acclimation Period | 28″-32″ | 18 on / 6 off | 40% |
| Seedlings/Young Vegetative | 24”-28″ | 18 on / 6 off | 60% |
| Vegetative Stage | 20″-24″ | 18 on / 6 out | 100% |
| Flowering Stage | 16″-20″ | J2 on / 12 off | 100% |
PB2000 Pro PPFD MAP – Tested in a 4×2 ft Grow Tent
PB2000 Pro SPECTRUM
PB20OO Pro Specification
| Model: | PB2000 Pro | HID Replacement: | 400W HPS/MH |
| Feature: | Remote Control | Vegetative Coverage at 22″: | 4 • 3.5 ft |
| Actual Power Draw: | 200W1396 at 12OV | Flowering Coverage at 18″: | 3.5 • 3 ft |
| LED Quantities: | 7OOpcs | Use for: | all stages grow and flowering |
| Total Harmonic Distortion: | e15% | Dimensions: | 24 x 10.8 x 2.4 inches |
| Input: | AC100-240V” 1.9A | Item Weight: | 8.9 lbs |
| Frequency: | 50-60Hz | Lifespan: | ?100,000 hours |
| Package Includes: |
|
||
| / | / | ||
NOTE
Extremely bright, do not stare at operating lamp.
For flowering stage: use all channels with 1009£ brightness.
This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs.
For safety, total true wattage of extra connected lights MUST less than 60OW.
PB4000 Pro
PB4000 Pro Suggestions
| PB4000 Pro | Height (above plants’ canopy) | Using Hours | Brightness |
| 3-5 Days Acclimation Period | 34″-38″ | 18 on / 6 off | 40% |
| Seedlings/Young Vegetative | 3O”-34“ | 18 on / 6 off | 60% |
| Vegetative Stage | 26’3O” | 18 on / 6 out | 100% |
| Flowering Stage | 22″-26″ | J2 on / 12 off | 100% |
PB4OOO Pro PPFD MAP – Tested in a 4×4 ft Grow Tent
PB4OOO Pro SPECTRUM
PB4OOO Pro Specification
| Model: | PB4000 Pro | HID Replacement: | 800W HPS/MH |
| Feature: | Remote Control | Vegetative Coverage at 28′. | 5 • 5 ft |
| Actual Power Draw: | 400W+3% at 12OV | Flowering Coverage at 24“: | 4 4 ft |
| LED Quantities: | 1400pcs | Use for: | all stages grow and flowering |
| Total Harmonic Distortion: | e15% | Dimensions: | 24 x 21.6 x 2.4 inches |
| Input: | AC100-240V” 3.8A | Item Weight: | 17.5 lbs |
| Frequency: | 50-60Hz | Lifespan: | ?100,000 hours |
| Package Includes: |
|
||
| / | / | ||
NOTE:
Extremely bright, do not stare at operating lamp.
For flowering stage: use all channels with 1009£ brightness.
This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs.
For safety, total true wattage of extra connected lights MUST less than 60OW.
Mounting Instructions
- Attach the clips on the ends of the hanging wires to each of the hanging holes on the light.
- Attach two adjustable ropes, via the carabineers, to each of the hanging wires’ carabineers.
- Attach opposite ends of adjustable ropes’ hangers to a safety mounting position.
- Adjust the light to your desired location by using the adjustable ropes.
Using Suggestions
This section will help you in the process of evaluating “how high” and “how many hours” will be best suited for each stage of plant growth. Hang the light at a minimum of 12 inches from light and plant canopy. Less than 12 inches distance may burn plants. Start high, adjust as plants acclimate.
Seedlings – You will need to hang the light high due to the delicate nature of seedlings. We recommend a break-in period of about a week while a seed has broken the surface. The first set of real leaves should be present while the seedling has been above ground for about a week.
Clones – Clones are a little bit hardier than fresh seedlings, but still, need to be given gentle light as they are entirely rootless when first cut, and need to conserve energy and moisture to transition into a rooting stage.
Vegetative – The deeper red spectrum is utilized less by the plant than when it is in flower. It uses high levels of white light that are essential for creating lush, thick plants that have tight internodal spacing and minimal stretching.
Flowering – The plant has much work to do and is preforming many complex biological processes in producing flowers and fruits. Because of this, the plant now requires large amounts of light.
Late Flower – Most rapid development has stopped, and the plant is gearing up for the scene in which the large flowers and fruits will mature or ripen.
Warranty
180 days full warranty 1 3 years limited warranty
What Is Covered
MAXSISUN lights are warranted against defects in materials and craft for three (3) years from the original date of purchase. During the warranty period, MAXSISUN will either repair or replace any covered defective product. Within the first 180 days, MAXSISUN will bear all costs associated with the repair, replacement, and return of the faulty product. After 180 days, the customer will assume responsibility for shipping the defective product back to MAXSISUN for the remainder of the warranty period. MAXSISUN will, in turn, assume liability for up to $50.00 per light of the shipping fees associated with returning the repaired or replaced product to the purchaser. Return shipping fees above $50.00 will be the responsibility of the purchaser.
What Is Not Covered
- This warranty does not cover any damage, deterioration, malfunction resulting from any alteration, modification, improper or unreasonable use or maintenance, misuse, abuse, neglect, exposure to excess moisture, fire, lightning, power surges, or other acts of nature.
- This warranty does not cover any damage, deterioration, malfunction resulting from the installation, removal, unauthorized tampering, repairs attempted by anyone unauthorized by MAXSISUN to make such repairs. Any other cause which does not relate directly to a defect in materials and quality of this product is not covered.
90 Days Money Back Guarantee
MAXSISUN is so confident in the performance of our cutting edge lights that we offer a full 90 days money-back guarantee. If you are unsatisfied with your purchase for any reason, we will gladly accept a return and provide a refund less shipping fees.
Eligibility requirements are as follows:
- Valid for the first purchase of MAXSISUN products only.
- Valid for the original purchaser only.
- Valid for up to two lights.
- 90 days begins from the date of purchase.
- The returned products must be in “like new” condition and in original packaging.
- Offer valid for returns only. Exchanges are subject to a 3O days return policy and restocking fee.
- Offer valid for direct purchasers only. Customers purchasing via authorized resellers are subject to policies of the reseller
Returns
Returns not qualifying for the 90 Days Money Back Guarantee can still be returned within 30 days from the date of purchase. Pending the below conditions are met, the purchaser will receive a refund:
- 30 days begins from date of purchase.
- Valid for the original purchaser only.
- The product must be in “like new” condition and in original packaging.
How To Obtain Warranty Service
To enforce the rights under this warranty, the purchaser must notify MAXSISUN of a warranty claim by sending an email to supportCamaxsisun.com. At this time, the purchaser will be called upon to provide proof of purchase. The MAXSISUN representative will either attempt to assist in trouble-shooting, request photos showing the defect, and provide more detailed return instructions. Upon receipt and review of the defective product, MAXSISUN will repair or replace, and return within five (5) business days. To obtain refund service, upon receipt and review of the returned product, MAXSISUN will issue return credit within three (3) business days.
Contact Us:
Email: [email protected]
Contact us via Amazon or eBay message
Website: www.maxsisun.com
Facebook
Instagram
Amazon Store
