microlife NC100 Infrared Thermometer Manual

1. Measuring sensor
2. Tracking light
3. START button
4. Display
5. ON/OFF button
6. Mode switch
7. Battery compartment cover
8. All segments displayed
9. Memory
10. Ready for measuring
11. Measurement complete
12. Body mode
13. Object mode

14. Low battery indicator
15. Changing between Celsius and Fahrenheit
16. Recall mode
17. Recall the last 30 readings
18. Measured temperature too high
19. Measured temperature too low
20. Ambient temperature too high
21. Ambient temperature too low
22. Error function display
23. Blank display
24. Flat battery
25. Replacing the battery

Read the instructions carefully before using the device.
Type BF applied part
Keep dry

This Microlife thermometer is a high-quality product incorporating the latest technology and tested in accordance with international standards. With its unique technology, this device can provide a stable, heat-interference-free reading with each measurement. The device performs a self-test every time it is switched on to always guarantee the specified accuracy of any measurement. This Microlife thermometer is intended for the periodic measurement and monitoring of human body temperature. This thermometer has been clinically tested and proven to be safe and accurate when used in accordance to the operating instruction manual. Please read through these instructions carefully in order for you to understand all functions and safety information.

The Advantages of this Thermometer

Measures in a matter of seconds
The innovative infrared technology allows the measurement without even touching the object. This guarantees safe and sanitary measurements within seconds.
Multiple uses (wide range of measurement)
This thermometer offers a wide range of measurement from 0-100.0 °C / 32-212.0 °F, meaning the unit can be used to measure body temperature or it also has a feature allowing it to be used to measure the surface temperature of the following examples:

Milk surface temperature in a baby’s bottle
The surface temperature of a baby’s bath
Ambient temperature

Accurate and reliable
The unique probe assembly construction incorporates an advanced infrared sensor, ensuring that each measurement is accurate and reliable.
Gentle and easy to use

The ergonomic design enables simple and easy use of the thermometer.
This thermometer can even be used on a sleeping child without causing any interruption.
This thermometer is quick, therefore child-friendly.

Auto-Display Memory
The last reading is automatically displayed for 2 seconds when the unit is switched ON.
Multiple readings recall
Users will be able to recall the last 30 readings when entering the recall mode, enabling efficient tracking of temperature variations.

Safe and hygienic

No direct skin contact.
No risk of broken glass or mercury ingestion.
Completely safe for use on children.
Cleaning of the probe can be done with an alcohol moistened cotton tissue, making this thermometer completely hygienic for use by the whole family. Fever alarm 10 short beeps and a red LCD backlight alert the patient that he/ she may have a temperature equal to or higher than 37.5 °C.

Important Safety Instructions

Follow instructions for use. This document provides important product operation and safety information regarding this device. Please read this document thoroughly before using the device and keep it for future reference.
This device may only be used for the purposes described in these instructions. The manufacturer cannot be held liable for damage caused by incorrect application
Never immerse this device in water or other liquids. For cleaning please follow the instructions in the «Cleaning and Disinfecting» section.
Do not use this device if you think it is damaged or notice anything unusual.
Never open this device.
A basic physiological effect called vasoconstriction can occur in the early stages of fever, resulting in a cool skin effect. The recorded temperature using this thermometer can, therefore, be unusually low.
If the measurement result is not consistent with the patient’s finding or unusually low, repeat the measurement every 15 minutes or double-check the result by another core body temperature measurement.
This device comprises sensitive components and must be treated with caution. Observe the storage and operating conditions described in the «Technical Specifications» section.
Ensure that children do not use this device unsupervised; some parts are small enough to be swallowed.
Do not use this device close to strong electromagnetic fields such as mobile telephones or radio installations. Keep a minimum distance of 3.3 m from such devices when using this device.
Protect it from: – extreme temperatures – impact and dropping – contamination and dust – direct sunlight – heat and cold
If the device is not going to be used for a prolonged period the batteries should be removed.

WARNING: The measurement results given by this device are not a diagnosis. It is not replacing the need for the consultation of a physician, especially if not match the patient’s symptoms. Do not rely on the measurement result only, always consider other potentially occurring symptoms and the patient’s feedback. Calling a doctor or an ambulance is advised if needed.

How this Thermometer measures Temperature

This thermometer measures infrared energy radiated from the forehead as well as objects. This energy is collected through the lens and converted to a temperature value.

Control Displays and Symbols

All segments displayed 8: Press the ON/OFF button 5 to turn on the unit; all segments will be shown for 2 seconds.
Memory 9: The last reading will automatically be shown on the display for 2 seconds.
Ready for measuring AT: When the unit is ready for measuring, the «°C» or «°F» icon will keep flashing while the mode icon (body or object) will be displayed.
Measurement complete AK: The reading will be shown on the display 4 with the «°C» or «°F» icon and the mode icon steady. The unit is ready for the next measurement as soon as the «°C» or «°F» icon is flashing again.
Low battery indicator AN: When the unit is turned on, the « » icon will keep flashing to remind the user to replace the batteries.

Changing between Body and Object Mode

For changing from the body to object mode, slide the mode switch 6 at the side of the thermometer downwards. For switching back to body mode, slide the switch up again.

Directions for Use

Measuring in body mode

Press the ON/OFF button 5. Display 4 is activated to show all segments for 2 seconds.
The last measurement reading will automatically be shown on the display for 2 seconds with the «M» icon 9.
When the «°C» or «°F» icon is flashing, a beep sound is heard and the thermometer is ready for measuring AT.
Aim the thermometer at the center of the forehead with a distance of no more than 5 cm. Please remove any hair, sweat or dirt from the forehead before measuring to improve the accuracy of the readings.
Press the START button 3 and ensure that the activated blue tracking light is aimed at the center of the forehead. After 3 seconds a long beep will verify the completion of measurement.
Read the recorded temperature from the LCD display.

Measuring in object mode

Follow steps 1-3 above, then aim the thermometer at the center of the object you want to measure with a distance of no more than 5 cm. Press the START button 3. After 3 seconds a long beep will verify the completion of measurement.
Read the recorded temperature from the LCD display.

NOTE:

Patients and thermometers should stay in similar room conditions for at least 30 minutes.
Don’t take a measurement while or immediately after nursing a baby.
Don’t use the thermometer in high humidity environments.
Patients should not drink, eat or exercise before/while taking the measurement.
Don’t move the measurement device from the measuring area before hearing the termination beep.
Use an alcohol swab to carefully clean the probe and wait for 15 minutes before taking a measurement on another patient.
10 short beeps and a red LCD backlight alert the patient that he/she may have a temperature equal to or higher than 37.5 °C.
Always take the temperature in the same location, since temperature readings may vary according to location.
Doctors recommend rectal measurement for newborn infants within the first 6 months, as all other measuring methods might lead to ambiguous results. If using a noncontact thermometer on those infants, we always recommend verifying the readings with a rectal measurement.
In the following situations, it is recommended that three temperatures are taken with the highest one taken as the reading:
1. Children under three years of age with a compromised immune system and for whom the presence or absence of fever is critical.
2. When the user is learning how to use the thermometer for the first time until he/she has familiarized himself/
herself with the device and obtains consistent readings.
3. If the measurement is surprisingly low.
Readings from different measuring sites should not be compared as the normal body temperature varies by measuring site and time of day, being highest in the evening and lowest about one hour before waking up.

Normal body temperature ranges:
– Axillar: 34.7 – 37.3 °C / 94.5 – 99.1 °F
– Oral: 35.5 – 37.5 °C / 95.9 – 99.5 °F
– Rectal: 36.6 – 38.0 °C / 97.9 – 100.4 °F
– Microlife NC 100: 35.4 – 37.4 °C / 95.7 – 99.3 °F

Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either Fahrenheit or Celsius. To switch the display between °C and °F, simply turn OFF the unit, press and hold the START button 3 for 5 seconds; after 5 seconds, the current measurement scale («°C» or «°F» icon) will flash on the display AO. Change the measurement scale between °C and °F by pressing the START button 3. When the measurement scale has been chosen, wait for 5 seconds and the unit will automatically enter the «ready for measuring» mode.

How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings.

Recall mode 16: Press the START button 3 to enter Recall mode when power is off. The memory icon «M» will flash.
Reading 1 – the last reading 17: Press and release the START button 3 to recall the last reading. Display 1 alone with a memory icon.
Reading 30 – readings in succession: Press and release the START button 3 consecutively to recall the last 30 readings in succession.

Pressing and releasing the START button 3 after the last 30 readings have been recalled will resume the above sequence from reading 1.

Error Messages

Measured temperature too high 18: Displays «H» when the measured temperature is higher than 42.2 °C / 108 °F in body mode or 100 °C / 212 °F in object mode.
Measured temperature too low 19: Displays «L» when the measured temperature is lower than 34.0 °C / 93.2°F in body mode or 0 °C / 32 °F in object mode.
Ambient temperature too high 20: Displays «H» and when the ambient temperature is higher than 40.0 °C / 104.0 °F.
Ambient temperature too low 21: Displays «L» and when the ambient temperature is lower than 16.0 °C /60.8 °F in body mode or lower than 5.0 °C / 41.0 °F in object mode.
Error function display 22: The system has a malfunction
Blank display 23: Check if the batteries have been inserted correctly. Also, check the polarity (<+> and <->) of the batteries.
Flat battery indicator BN: If only «» icon is shown on the display, the batteries should be replaced immediately.

Cleaning and Disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl) to clean the thermometer casing and the measuring sensor. Ensure that no liquid enters the interior of the device. Never use abrasive cleaning agents, thinners or benzene for cleaning and never immerse the device in water or other cleaning liquids. Take care not to scratch the surface of the sensor lens and the display.

Battery Replacement

This device is supplied with 2 new, long-life 1.5V, size AAA batteries. Batteries need replacing when this icon «» 24 is the only symbol shown on the display.
Remove the battery cover 25 by sliding it in the direction shown. Replace the batteries – ensure correct polarity as shown by the symbols in the compartment.

Batteries and electronic devices must be disposed of in accordance with the locally applicable regulations, not with domestic waste.

Guarantee

This device is covered by a 2-year guarantee from the date of purchase. During this guarantee period, at our discretion, Microlife will repair or replace the defective product free of charge.
Opening or altering the device invalidates the guarantee.
The following items are excluded from the guarantee:

Transport costs and risks of transport.
Damage caused by the incorrect application or non-compliance with the instructions for use.
Damage caused by leaking batteries.
Damage caused by accident or misuse.
Packaging/storage material and instructions for use.
Regular checks and maintenance (calibration).
Accessories and wearing parts: Battery.
Should guarantee service be required, please contact the dealer from where the product was purchased or your local Microlife service. You may contact your local Microlife service through our website: www.microlife.com/support Compensation is limited to the value of the product. The guarantee will be granted if the complete product is returned with the original invoice. Repair or replacement within the guarantee does not prolong or renew the guarantee period. The legal claims and rights of consumers are not limited by this guarantee.

Technical Specifications

Type: Non Contact Thermometer NC 100
Measurement range: Body mode: 34.0-42.2 °C / 93.2-108.0 °F
Object mode: 0-100.0 °C / 32-212.0 °F
Resolution: 0.1 °C / °F
Measurement accuracy:±0.2 °C, 36.0 ± 39.0 °C ±0.4 °F, 96.8
Laboratory: ±102.2 °F
Display: Liquid Crystal Display, 4 digits plus specifics
Acoustic: The unit is turned ON and ready for the measurement: 1 short beep.
Complete the measurement: 1 long beep(1 sec.) if the reading is less than 37.5 °C / 99.5 °F, 10 short «beep» sounds if the reading is equal to or greater than 37.5 °C / 99.5 °F.
System error or malfunction: 3 short «bi» sounds.
Memory: Auto-Display the last measured temperature 30 readings recall in the memory mode
Backlight: The display light will be GREEN for 3 seconds when the unit is turned ON. The display light will be GREEN for 5 seconds, when a measurement is completed with reading less than 37.5 °C / 99.5 °F. The display light will be RED for 5 seconds when a measurement is completed with a reading equal to or higher than 37.5 °C / 99.5 °F.
Operating conditions: Body mode: 15-40.0 °C / 59-104.0 °F
Object mode: 5-40.0 °C / 41-104.0 °F
Storage conditions: -25- +55°C / -13- +131°F 15 – 95 % relative maximum humidity
Automatic Switch-off: Approx. 1 minute after last measurement has been taken.
Battery: 2 x 1.5 V alkaline batteries; size AAA
Battery approx. 2000 measurements
lifetime: (using new batteries)
Dimensions: 150 x 40 x 39 mm
Weight: 81 g (with batteries), 56 g (w/o batteries)
IP Class: IP21
Reference to standards: ASTM E1965; IEC 60601-1; IEC 60601-1-2 (EMC); IEC 60601-1-11
Expected service life: 5 years or 12000 measurements

This device complies with the requirements of the Medical Device Directive 93/42/EEC. Technical alterations reserved. According to the Medical Product User Act a biennial technical inspection is recommended for professional users. Please observe the applicable disposal regulations.