IMPORTANT SAFETY NOTES

Before using this product, read this manual carefully and keep it properly for future reference.

• Do not use this product for a prolonged time to avoid affecting your hearing.
• Do not use this product when driving.
• Do not play music in an extra-large voice.
  Please use this product according to the local laws and regulations.
• Please keep it dry.
• Containing a rechargeable battery, this product cannot be dismantled, altered, or replaced by yourself. Do not expose it to sunlight or fire sources.
• This mark indicates the product should not be disposed of in the same way as other household wastes in EU regions. The product should be recycled to ensure sustainable reuse of resources and to prevent potential harm to the environment and human health caused by non-control of waste management. To recycle the used appliance, apply the recycling system or contact the franchiser to recycle the product according to the environmental protection requirements.

PRODUCT AND ACCESSORIES

• Multifunctional button (MFB)
• LED indicator light
• Charging indicator light
• USB charging port
• Earphones’ charging contact point
• Charging cable

SPECIFICATIONS

USAGE INSTRUCTIONS

Wearing Earphones

Take out the earphones from the charging compartment and wear them on your ears according to the LIR mark printed inside.

Pairing

After being taken out of the charging compartment, the earphones will be paired while the LED indicator will flash red and blue alternatively. Initiate the BT function on your mobile phone connected, after which the LED indicator will flash blue. and search Miniso M1 to

• Charging
• Charging compartment:
• After connecting the charging cable with the compatible DC adapter,
• plug the other end of the charging cable into the charging port to charge.

Charging earphones

Put the earphones into the charging compartment, making sure that the ear- phones’ charging contact points are in touch with the thimble inside the charging case to charge the earphones.The  LED indicator light will stay on red when charging and turn off after charging Earphones will automatically power off when charging.

Functions/Operation of Earphones

FCC Warning

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device múst accepts any interference received, including interference that may cause undesired operation.

Caution

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

MINISO LT716 Sport Smart Watch

CAUTIONS

1.  Charge the product fully before use.
2.  Do not wear it when you are swimming, having a shower or bath.
3.  If you are not going to use tt,e product for a long time, please charge it once every 3 months to maximize its lifespan.
4.  Do not use or store it below -1o·c or aoove 40C to avoid shortening the lifespan of device and battery. Keep the battery away from direct sunlight, fire, high t0mperature.

PARAMETERS

1.  BT version: 4.2
2.  Battery capacity: 3.7V 60mAh
3.  Waterproof: IPX4
4. Screen resolution: 126×128
5.  Input: SV::: 0.05A

PRODUCT OVERVIEW

1. Function button.
2. Display
3. Sensor

OPERATION INSTRUCTIONS

Charge the watch
Before first use, try to turn on the device to check if the battery level is low. If you failed, you should charge the product with a charger; then the watch will tum on automatically. Take out the main part of watch.

Install the main part into a computer or a power adapter for charging.

Install the watch app on your phone

Scan the QR code or go to the App Store to download and install the app. Supports: Android 5.0 or above, iOS 9.0 or above. Bluetooth 4.2

Device connection
Before first use, connect it to the APP for calibration. After the connection, the watch will automatically synchronizs the time. Enable bluetooth on your phone- open the APP – click ·Bind DeVice”

• After the pairing, the APP will automatically save the Bluetooth address of the watch, and when the APP is opened or running in the background, it will automatically search and connect the watch.
• For use on Android phone, the APP requires permissions to access sensitive data on your phone such as contact information; besides, you should allow the APP to n.m in the background.

Watch function 

•  Turn on: when the device is turned off, long press function button for more than 3s to tum it on.
•  Reset watdl: this operation will erase all data in the watch (such as the number of steps}.
•  Light up the SCf8en: when the device is turned on, short press the function button.
•  Set the ttiam& of dock page: the defRult dock page on the watch can be changed. You can control the settings by entering the .. more” menu. If there is no operation for 5s, the screen wil tum off automatically.

ACCESSORIES

• Watch x1
• User Manual x1

TROUBLESHOOTING

1.  The watch  unable to be pain1d with the cell phone.
   Solution: Confirm if the watch has been turned on, and if the Bluetoolh on your phone is toggled on. Then delete the product in the list, pair it with your phone again according to the User Manual.
2.  The watch Is unable to be tu med on.Solution: Confirm the battery level. Charge the watch fully if it is needed.
3.  Can the battery of the watch be replaced? Solution: No, this is lithium polymer battery, which is irreplaceable.
4.  The llnk between the watch and the cell phone has been disconnactad within 10 matars.
   Solution: Bluetooth is wireless so that it is very sensitive to objects bet-.veen the watch and the connected device. Check if there are any metal or other objects that may affect connection within the effective distance.

FCC Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference, and  this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in acoordance with the instructions, may cause harmful interference to radio oommunications. However, there is no guarantee that interference win not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an ouUet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radiafTV technician for help. ‘”RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

User Manual

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY.

Pairing

Press FN+1 for 5 seconds, then the first light will blink fast, after that the possible devices to use the keyboard would find the Bluetooth (MINISO-K616 ). now you can get them paired. press FN+2 for 5 seconds, then the second light will blink fast, after that the possible devices to use the keyboard would find the Bluetooth (MINISO-K616 ), now you can get them paired. press FN+3 for 5 seconds, then the third light will blink fast, after that the possible devices to use the keyboard would find the Bluetooth (MINISO-K616 ), now you can get them paired.

Sleep Mode

After being not used for 10 minutes the keyboard will turn into sleep mode, then if you press any key it will turn back to active mode.

Functionality

Compatible with different operating systems of Win2000, Win XP, Win ME, Vista, Win7, Win8, Win10, etc.

Product Parameters

1.  Size: 366’131″24mm
2. Weight: 354.6g±5g
3. Pairing method: Bluetooth (Bluetooth name: MINISO-K616)
4. Working voltage: VDD=1.5V
5. Compression load: 53gt8g
6. Key travel: 2.5mmi0.5mm
7. Rated Current: 15mA
8. Temperature: -20-55°C

FN Key combination

1. FN+F1 Open music player (Only applicable for Kugou Player)
2. FN+F2 Decrease the volume
3. FN+F3 Increase the volume
4. FN+F4 Mute
5. FN+F5 Previous track
6. FN+F6 Next track
7. FN+F7 Pause
8. FN+F8 Stop
9. FN+F9 Open homepage
10. FN+F10 Open e-mail box
11. FN+F11 Open “My computer”
12. FN+F12 Open “My favorites” (Only applicable for IE browser)

Cautions

1. Do not expose the battery to humidity or high temperature. Avoid contact with conducting materials or liquids.
2. Prevent short circuits.
3. Battery life varies according to service condition, used batteries should be disposed of according to local laws.
4. Do not disassemble or repair the product by yourself.
5. If the product does not work properly, please contact after-sales service support for related service or repair.

Storage

1. Turn the power off before storing.
2. Do not expose to humidity or high temperature.

FCC Warning:
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

SPECIFICATION

FAQS

What are the FCC and IC warnings for the product?

The device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to certain conditions, and changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment. The device must not cause harmful interference and must accept any interference received.

How should I store the keyboard?

Turn the power off before storing and avoid exposing it to humidity or high temperature.

What should I do if the product does not work properly?

Contact after-sales service support for related service or repair.

What cautions should I take when using the keyboard?

Do not expose the battery to humidity or high temperature. Avoid contact with conducting materials or liquids. Prevent short circuits. Battery life varies according to service condition, used batteries should be disposed of according to local laws. Do not disassemble or repair the product by yourself.

What are the FN key combinations for the keyboard?

The FN key combinations include opening the music player (FN+F1), decreasing volume (FN+F2), increasing volume (FN+F3), mute (FN+F4), previous track (FN+F5), next track (FN+F6), pause (FN+F7), stop (FN+F8), opening homepage (FN+F9), opening email box (FN+F10), opening “My computer” (FN+F11), and opening “My favorites” (FN+F12).

What are the product parameters of the MINISO K616 Wireless Multimedia Keyboard?

The keyboard measures 366’131″24mm and weighs 354.6g±5g. It uses Bluetooth for pairing and has a working voltage of VDD=1.5V. The compression load is 53gt8g, key travel is 2.5mmi0.5mm, and rated current is 15mA. It can operate in temperatures ranging from -20-55°C.

What operating systems is the keyboard compatible with?

The keyboard is compatible with Win2000, Win XP, Win ME, Vista, Win7, Win8, and Win10.

How do I activate sleep mode on the keyboard?

The keyboard will automatically enter sleep mode after being inactive for 10 minutes. Press any key to reactivate it.

How do I pair the MINISO K616 Wireless Multimedia Keyboard with my device?

Press FN+1, FN+2, or FN+3 for 5 seconds to initiate pairing mode, then find the Bluetooth (MINISO-K616) on your device and pair them.