miroco MI-CL003 Light Therapy Lamp manual

miroco MI-CL003 Light Therapy Lamp

Product Diagram

1. Lamp
2. Power Button
3. Timer Buttons
4. Light Brightness Button
5. Power Port
6. Supporting Foot
7. Hanging Inset

Features

Your new Miroco light therapy lamp is a remarkable product with many features and benefits:

• Delivers LED light to your home, office, dorm room or apartment.
• Designed with a stable stand for easy placement on a convenient spot.
• Cues your body’s own energy enhancers to help you regain focus and concentration.
• UV free LED- the built-in LED light panel delivers the full brightness with no pollution, no radiation and no stroboscopic effects.
• 10.000 lux at l0cm/4. from lamp to lift up your spirit.

Important

1. This product contains magnets. Keep a proper distance if you are wearing a pacemaker or any other implants.
2. Some people may suffer from light sensitivity; discontinue use immediately if any discomfort occurs.
3. Consult your health care provider before use of this product ff you are under medical care or have suffered from an eye condition before.
4. Never cover the lamp or place anything on top of it during operation to avoid overheating or fire hazards.

Specifications

Model	MI-L003
Voltage	AC 100-240V 50 / 60Hz DC 12V lA
Power	11W Max
Storage Temperature	-20 – 50°C / -4 – 122°F

How to Use

1. Put the lamp on a flat and stable surface using the support foot or hang it up through the hanging inset.
   
   
2. Connect to a power source with the included power adapter. The unit will enter standby mode. and the Power Button indicator will light up.

Power On / Off
Tap the Power Button to tum on / off the lamp.
Note: If power Is not disconnected. the lamp will remember the light brightness of last use when fumed on again.

Adjust the Light Brightness
When the lamp is on. tap the Light Brightness Button to set the light brightness between low / medium / high levels.

Set the Timer

1. Tap the Timer Button to set the timer from 10 minutes to 60 minutes. The timer button indicators will light up accordingly.
2. Tap and hold the set Timer Button to tum off the timer.

Warning

1. Please keep the lamp away from waler or any other liquid to avoid electrical shock.
2. For Indoor use only.
3. Close supervision is needed when used by or near children.
4. Keep away from heat and avoid direct sunlight.
5. Don’t try to repair or dlsmantte the lamp by yourself.
6. Don’t drop or knock the lamp on hard surfaces.