Loading manuals...

Motorola Motobuds Charge manual

Motorola Motobuds Charge manual Image

Quick Start Guide

Model No. : Motobuds Charge, MOTO BUDS CHARGE
IC: 20353-MBCHR
Frequency Band: 2.402 – 2.480GHz
Maximum RF power: 6 dBm
Working temperature: -10°C ~ 45°C


Fully charge before use
The device can be powered through a USB-C from any CE compliant power source that implement the European interface as requested by EN 301 489-52.


  1. Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
  2. Select “Motobuds Charge” from the smartphone Bluetooth menu.


  1. To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
  2. Insert the Motobuds into your ear and rotate to fit comfortably.

Basic Operation:

Additional Operation
Factory reset 1.   Ensure earbuds are not connected to phone
2.   Double press MFB and then hold MFB for 5 second until LED shows blue and red
3.   Put both buds into the charging case
Reject a call MFB 2sec
Receive incoming and on hold ongoing call Single Press MFB
LED Indicator
Pairing Red-blue flash
Standby Blue flash
Charging Red steady
Fully charged Off
Battery low Red flash

More Manuals From Motorola