MODEL: VERVEBUDS 500 Product ID: SH022
Frequency Band: 2.402 – 2.480 GHz Bluetooth ID: D036846
Maximum RF power: 6 dBm FCC ID: VLJ-SH022
Working temperature: -10°C – 45°C IC: 4522A-SH022
Quick Start Guide
(1) Pairing:
1. *Ensure both buds are inside the charging case with the lid closed. Take both buds out from the case.
2. Select “Vervebuds 500” from the smartphone Bluetooth menu
Value-added Feature
To use the buds independently (mono mode) please follow this pairing sequence.
3. Switch off the right bud by either holding MFB for 2 sec or by putting the right bud into the case with lid closed.
4. Put the left bud into pairing mode by holding it for 5 sec
5. Select “Vervebuds 500(L)”
*Tips: When the Vervebuds are sitting on the case, it will automatically be switched on when charging case lid is open. It will automatically be switch OFF when the lid is closed.
*Tips: Both right and left buds can be used as a mono!
(2) Fitting:
1. Insert the Vervebuds into your ear and rotate to fit comfortably
2. To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
(3) Basic Operation:
| Additional Operation | |
| Factory reset | Switch off both buds, then hold both MFB for 10 sec until it shows PURPLE LED |
| Reject a call | Long Press MFB |
| Mute during call | Double Press MFB |
| Receive incoming call and end ongoing call | Double Press MFB |
| Receive incoming and on hold ongoing call | Single Press MFB |
| Voice command (Siri/Google/Alexa) | Double Press MFB (only available in standby mode) |
| LED Indicator | |
| Pairing | Red-blue flash |
| Standby | Blue flash |
| Charging | Red steady |
| Fully charged | Off |
| Battery low | Red flash |
(4) Charging:
Fully charge before use
The device can be powered through a micro USB from any CE compliant power source that implement the European interface as requested by EN 301 489-52.
