Selfie Stick
Mpow ISNAP X1 / PA168A
Packing
Diagram
- Fill Light
- Phone Holder
- Adjusting Knob
- l/4″ Screw for GoPro or camera
- Remote Control
- Handle
- Stable Tripod Stand
Pairing
Long press the camera key for 2s until the blue light flashes. Turn on the wireless function on your phone and select “Mpow isnap x1 ” the blue light stays on if paired successfully.
Tips: Tum off: Long press the camera key for another 3s to turn it off.
Step-1.
Loosen the knob and adjust the angle up and down. After adjusting the angle. tighren the knob and put your phone on. (Vertical or Horizontal)
Step-2.
The tripod is located in the handle slot open it outwards when in use. After unfolding the tripod, push the locking device
Step-3.
The remote control is connected to the mobile phone, and the effective distance of the remote control is up to 10 meters/33 feet
Tips
- The remote control will automatically sleep after 5-10mins if without any operation. just click the camera key to wake it up.
- The remote control will automatically off after 30mins if without any operation, and you need to press the camera key for 2 seconds to tum it on
How to Use the Fill Light?
How ID Install a camera or GoPro on the Tripod?
For camera
For GoPro
How to install a cameras or GoPro on the tripod
Step-1.
Adjust the l /4″ screw to the right position with the adjusting knob
Step-2.
Connect the l /4″ screw to the screw thread at the bottom of the camera/GoPro connector and then tighten it
