NEC LED-FA012i2 Ultra HD LED Kit Manual

NEC LED-FA012i2 Ultra HD LED Kit

Product Information

The NEC FA FE Series LED Module is a high-quality LED display system that comes in various models such as LED-FA012i2, LED-FA015i2, LED-FA019i2, LED-FA025i2, LED-FA031i2, LED-FA038i2, LED-FE012i2, LED-FE015i2, LED-FE019i2, LED-FE025i2, LED-FE031i2, LED-FE038i2. This LED display system is designed to provide high-quality and clear images with its advanced pixel technology. The system is equipped with various safety features to ensure the safety of users during installation and operation.

Safety Guidelines

The NEC FA FE Series LED Module comes with various safety guidelines that users must follow to ensure their safety and the safety of the product. These guidelines include:

Following safety symbols used in the manual
Ensuring only qualified personnel install and operate the system
Wearing personal protective gear such as safety helmets when working with suspended loads
Keeping the system away from aggressive substances, inflammable gases, and vapors to avoid the risk of fire and product damage
Not leaving the cabinets standing freely due to the risk of crushing and product damage caused by its heavy weight
Not installing or operating the system in a dusty environment to avoid the risk of product damage
Not cleaning the system with water and not wiping the LED Pixel Cards with a damp cloth to avoid the risk of product damage by moisture or water
Ensuring the system is properly grounded to avoid the risk of electric shock and property damage
Protecting the power cable against overload by wiring maximum 10 cabinets in a row at 100 V AC or 20 modules at 240 V AC
Observing the ventilation requirements during the installation

Product Usage Instructions

Follow the below instructions to ensure proper usage of the NEC FA FE Series LED Module:

Ensure that you have the correct model of the NEC FA FE Series LED Module for your intended use.
Read and understand the safety guidelines provided in the manual before installing or operating the system.
Only allow qualified personnel to install and operate the system.
Wear personal protective gear such as safety helmets when working with suspended loads.
Keep the system away from aggressive substances, inflammable gases, and vapors to avoid the risk of fire and product damage.
Do not leave the cabinets standing freely due to the risk of crushing and product damage caused by its heavy weight. Always use the mounting arrangement.
Do not install or operate the system in a dusty environment to avoid the risk of product damage.
Do not clean the system with water and do not wipe the LED Pixel Cards with a damp cloth to avoid the risk of product damage by moisture or water.
Ensure the system is properly grounded to avoid the risk of electric shock and property damage.
Protect the power cable against overload by wiring maximum 10 cabinets in a row at 100 V AC or 20 modules at 240 V AC. The total load must not exceed 16 A per cable.
Observe the ventilation requirements during installation.

SAFETY AND COMPLIANCE GUIDELINES

Read the instruction manuals carefully and follow the given instructions and safety information thoroughly.
The operating safety of the system is only ensured through its proper use.
Only operate the system with supplied accessories and tools.

Safety Symbols Used in this Manual

Safety instructions emphasize potential hazards for personal injury or property damage. This manual uses the following safety notices to indicate the severity of a potential hazard:

WARNING! A warning for a potentially hazardous situation that can result in death, personal injury, or property damage if not adhered to.
Caution! A recommendation for a potentially hazardous situation that may result in personal injury or property damage if not adhered to.
Notice: A recommendation for a potentially hazardous situation that may result in property damage if not adhered to

Qualification of Personnel
Only authorized and qualified technical personnel can perform the installation. Before the installation, the installation technician must be convinced of the completeness of the scope of supply including the required accessories. The technician may only use the prescribed network cables, please see the cabling in this manual. There must be a security officer who is responsible for the security at diverse tasks during the installation. Only personal qualified by Sharp NEC DISPLAY SOLUTIONS and/or respectively authorized personal may carry out repairs, service and maintenance work on the system. A case of service occurs as soon as one component is damaged in any way, is not fully functional any more. Only trained personnel, such as electricians or NEC personnel, may connect the internal power supply to mains power supply.
Personal Protection
WARNING! Electric shock hazards. Follow the relevant legal electric requirements of the country, where the system will be mounted, installed and operated, as well as the existing regulations of the operator, such as work, operating and safety regulations.
WARNING! Suspended loads can cause severe head injuries. Wear safety helmets when working with suspended loads.
Caution! Risk of crushing and product damage due to heavy weight of the product.

When assembling heavy objects, take great care to avoid crushing hands or limbs.
Treat the cabinets with great care while lifting, placing or transporting them to avoid injuries and damages at the cases or LED pixel cards.

General Safety Guidelines

WARNING! Risk of electric shock or fire due to high-voltage components.

Do not expose this unit to rain or moisture.
Do not submerge this unit partially, or completely in water, or liquids.
Do not use this unit’s polarized plug with an extension cord receptacle or other outlets unless the prongs can be fully inserted.
Do not open the cabinet because of the high-voltage components inside. There are no user
serviceable parts are inside.
Only qualified service personnel are allowed to service and open the unit.

Caution! Risk of electric shock.

If not in use, fully disengage the power to the unit by disconnecting the power cord from the AC outlet.
Do not use damaged cables. Check cables regularly. Replace damaged cables immediately, they are not user-serviceable.

Caution! Risk of fire and product damage by aggressive substances. Keep the system away from aggressive substances, inflammable gases and vapors.

Caution! Risk of fire, injuries and product damage.

Keep the system away from flammable material.
Never block the air ventilation spaces around the LED Wall. Keep them free at all times.
Only use the supplied cables, which are fit for the system and its components.

Caution! Risk of crushing and product damage due to heavy weight of the product. The cabinets are top-heavy. Never leave them standing freely. Always use the mounting arrangement.
Caution! Risk of product damage due to dusty environment. Do not install or operate the system in a dusty environment.
Caution! Risk of product damage by moisture or water. Do not clean the system with water. Do not wipe the LED Pixel Cards with a damp cloth.

Attention
The installation should be performed only after you are thoroughly familiar with all of the proper installation instructions and safety checks. This manual contains fundamental information that should be observed in connection with the installation, start-up, operation and maintenance of the LED video display. Neglect or not following these instructions will increase the risk of hazards and injury to the user. Before work on the system, the power must be disconnected, and the system must be checked for absence of power and secured against further connection of power. Clean the unit only with materials or chemicals that are inert, nonabrasive, noncorrosive and non-marking. Consult the manufacturer for further advice should any doubts exist regarding any cleaning procedure.
Ambient Temperature

The ambient temperature of the FA Series is maximum +40°C and minimum -20°C.
To avoid damage of the LED wall by over-heating, do not exceed the ambient temperature.

Risk of Fire

Keep flammable materials away from the installation. During operation a lot of energy is transferred into heat. The installation should be placed so that the amount of air flow required for safe operation of the equipment is not compromised.
Proper ventilation must be provided. Never block the air ventilation holes. Keep them free at all times.
To protect the power cable against overload maximum 10 cabinets shall be wired in a row at 100 V AC or 20 modules at 240 V AC. The total load must not exceed 16 A per cable.
To avoid risk of fire due to overheating of the cables, only use the supplied cables that are meant for the system and its components. Damaged cables must be replaced by new cables. The cables are not user serviceable.

Safety for Electricity and Power Supply

The electrical systems and their components are not to be opened. The parts inside modules, which are not user-serviceable, hold high voltages, including when these components are not in-use for a long time. Accessing these components may lead to serious injury, or property damage.
Only authorized and qualified personnel may open the system and its components! All repairs to the system may only be carried out by Sharp NEC DISPLAY SOLUTIONS and/or by respectively authorized and qualified technical personnel.
Power cables and connectors are especially designed to be used indoor according to protection class IP20. Only use the supplied cables and plugs. The usage of other manufacturers can cause property damage.
This equipment is designed to be used in the condition of the power cord connected to earth. If the power cord is not connected to the earth, it may cause electric shock. Make sure the power cord is earthed properly.

WARNING! Risk of electric shock and property damage. Ensure the system is properly grounded.
Caution! Risk of overload of the power cable. To protect the power cable against overload maximum 10 cabinets shall be wired in a row at 100 V AC or 20 modules at 240 V AC. The total load must not exceed 16 A per cable.

The limit values specified in the technical data must never be exceeded.
Only operate the system with supplied accessories (cables, power distribution, assist grip, transport carts). However, a power cord to supply power is not included.
Do not operate or touch the system with wet hands.
Use the provided transition ramps (cable channels). Protect the cable against kinks and sharp edges.

Notice
Use a TN-S power distribution system with a separate neutral and grounding conductor. Due to voltage differences in the neutral conductor, large ground current loops can be avoided therewith. The complete electrical system should be protected by an appropriately rated disconnect switch, circuit breakers, over voltage protector and Ground Fault Current Interrupters. The power system needs to be installed according to the local electrical installation codes. For Europe, installations have to be conform to DIN-EN 60364 – the standard for electrical installation of buildings, (and related harmonized Norms). In Germany, the VDE 0100 should be followed and adhered to.
Installation Setup – Wall Mounting
For the limited space for installation, you may either cut a same size space as the LED display on the wall, then install the LED display in this space or fix the support structure directly onto the wall. It requires solid walls. Observe the ventilation requirements.
All additional fixation components and tools must be determined by a detailed static calculation to ensure a safe and high-performance LED system. Front maintenance will be very convenient.

Caution! Risk of personal injury and product damage by unsuitable wall mounting equipment.
Before starting the installation:

Ensure that the installation site is suitable for the cable routing plan. If necessary, mark important points of the plan on the wall used for the installation.
Regarding the installation site: Analyze the wall used for the installation and the weight of the complete LED Wall (see Table 1). Choose installation equipment, e.g. tools, screws and dowels, that are suitable for the wall conditions and the weight of the LED Wall.

Stability hazard:
The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the floor/wall in accordance with the installation instructions.

Table 1: Dimensions and Weight for LED Wall 4×4, 5×5, 6×6

	4 × 4 LED Wall	5 × 5 LED Wall	6 × 6 LED Wall
Dimensions incl. frame (W × H)	2472×1488 mm	3080×1830 mm	3688×2172 mm
Weight	259 kg	381 kg	503 kg

DECLARATION OF CONFORMITY

CE
FCC
RoHS
AEEE Yönetmeliğine Uygundur
EAC
Electromagnetic Compatibility Directive (EMC) 2014/30/EU
Low Voltage Directive 2014/35/EU
ETL

CE Information

WARNING! Operation of this equipment in a residential environment could cause radio interference.

FOR CUSTOMERS IN U.K. IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW: “Earth”
BLUE: “Neutral”
BROWN: “Live”

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked

FCC STATEMENT

FCC Information (for USA only)

WARNING!

The Federal Communications Commission does not allow any modification or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Supplier’s Declaration of Conformity (for USA only)

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions.

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- U.S. Responsible Party: NEC Display Solutions of America, Inc.
- Address: 3250 Lacey Rd, Ste 500 Downers Grove, IL 60515
- Telephone Number: 630-467-3000
- Type of Product: LED MODULE
- Equipment Classification: Class A Peripheral
- Model Number: LED-FA012i2 LED-FA015i2 LED-FA019i2 LED-FA025i2 LED-FA031i2 LED-FA038i2 LED-FE012i2 LED-FE015i2 LED-FE019i2 LED-FE025i2 LED-FE031i2 LED-FE038i2

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-0034.

VCCI Information

This device is a class A device. Radio interference may occur if this equipment is used in a residential environment. can cause In this case, the user should take appropriate measures. may be requested. High-frequency wave current standard JIS C 61000-3-2 compliant product

KC Information

This device is a device that has undergone a conformity assessment for use in a business environment and is used in a home environment.

Taiwan Information

800 cd/m2(LED-FA012i2、LED-FA015i2、LED-FA019i2、LED-FA025i2、LED-FA031i2、 LED-FA038i2、LED-FE012i2、LED-FE015i2、LED-FE019i2、LED-FE025i2、LED-FE031i2、LED-FE038i2) 600 cd/m2(LED-FE012i2-E、LED-FE015i2-E、LED-FE019i2-E) 400 cd/m2(LED-FA012i2-SB、LED-FA015i2-SB)

Contrast: 5000:1
Input voltage: 100 – 240 V AC
Input frequency: 50/60 Hz
Input current: 16 A
Country of manufacture: China
Attention: Do not open the casing, be careful of high-voltage electric shock, and there are no user accessories inside the machine.
How to use: Make sure that there is good ventilation around the LED module for proper heat dissipation. Do not block the ventilation openings, or place the LED Module near a radiator or other heat source.
Importer: Taiwan Enyixi Co., Ltd.
Address of the importer: 7th Floor, No. 167, Section 2, Nanjing East Road, Zhongshan District, Taipei City
Importer phone number: 02-8500-0000 (representative number)
Manufacturer: Sharp NEC Display Solutions, Ltd.

DISPOSAL
Within the European Union

WEEE Mark (European Directive 2012/19/EU and amendments)
Disposing of your used product: In the European Union
EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (see on the left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power
cords. When you dispose of such products, please follow the guidance of your local authority or ask the shop where you purchased the product, or if applicable, follow applicable legislation or agreement you may have. The mark on electrical and electronic products my only apply to the current European Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority and ask for the correct method of disposal.

COPYRIGHT AND DISCLAIMER

Copyright

NEC is a registered trademark of NEC Corporation.
All product and company names are property of their respective owners. Use of them does not imply any affiliation with or endorsement by them.
NovaStar and NovaLCT is a registered trademark of NovaStar Tech Co., Ltd.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Disclaimer

All instructions and specifications in this manual are based on information available at the time of publishing for the features and safety guidelines of the described products.
Technical specifications, measurements, weights and properties are not guaranteed.
The manufacturer reserves the right to make product alterations within legal provisions as well as changes to improve product quality.
Sharp NEC DISPLAY SOLUTIONS shall not be liable for personal injury or damage to materials caused by failure to observe this warning and safety information of this manual. Furthermore, Sharp NEC DISPLAY SOLUTIONS cannot be held responsible for damage or injury, caused by incorrect, inadequate or unsafe use, maintenance or installation of the entire system. The liability as well as the effects of the same will become void if other than genuine parts are used.

LOCAL REGULATIONS

This product and assembly variants that are shown in these instructions for assembly and use may be subject to local regulations, guidelines and norms.
The product use bears the responsibility for compliance to and with such regulations.
Subject to local regulations, we reserve the right not to supply all products illustrated here.

SERVICE and SUPPORT

Service & Support in Europe

Please contact: Sharp NEC Display Solutions Europe GmbH. Landshuter Allee 12-14, D-80637 München
Phone: + 49 (0) 89/99699-0
Fax: + 49 (0) 89/99699-500
For the latest information please see https://www.sharpnecdisplays.eu.
Data is subject to change without notice.

Sales Office List for Asia/Pacific

For the latest information please see
https://www.sharp-nec-displays.com/ap/contact/index.html.

The date of manufacture is indicated on the cardboard box. Get to know her. Importer – Sharp NEC Display Solutions Europe GmbH 119034, Москва, Турчанинов переулок, д. 6, строение 2, офис 39-50. Sharp NEC Display Solutions, Ltd.

NEC LED-FA012i2 Ultra HD LED Kit Manual