OLUTRON Fan Controls Manual

OLUTRON Fan Controls

Dim your LED lights & adjust fan speed from one wall control. Eliminates the need for pull chains.

• LED+ dimmer for LEDs and incandescent/halogen bulbs
• 4-speed fan control
• Available in 26 colors
• Single pole; no neutral wire or canopy module required
  Note: Separate wire required for fan and light

Did you know?
Lutron LED+ dimmers:

• Don’t require a neutral or special wire temperature rating
• Take the hassle out of low-end adjustments
• Use patented technology to prevent dimmer interaction and minimize flicker, for beautiful LED dimming

Name and Model No.	Fan speeds	Fan amp	Light control	Maximum Wattage		Control locations	Required wiring
				LED	Inc/Hal
Fan / light controls
Maestro MACL-LFQ*	4	1.5 A	Dimmer LED / Inc / Hal	75 W	250 W	Single pole	3 wires
Diva DVFSQ-LF*	3	1.5 A	Switch LED / Inc / Hal	120 W	240 W	Single pole	3 wires
Skylark S2-LFSQ*	3	1.5 A	Dimmer Inc / Hal	N/A	300 W	Single pole	3 wires
Fan-only controls
Skylark SFSQ	3	1.5 A	N/A	N/A	N/A	Single pole	2 wires
Skylark Contour CTFSQ	3	1.5 A	N/A	N/A	N/A	Single pole / 3-way	2 wires
Ariadni AYFSQ _____________ Toggler TGFSQ	3	1.5 A	N/A	N/A	N/A	Single pole / 3-way	2 wires
Rotary FSQ-2F	3	1.5 A	N/A	N/A	N/A	Single pole	2 wires

* Requires separate wires in the backbox for fan and light— see “Wiring” section
More options available online—visit lutron.com to learn more.

Make sure to choose your fan control based on the type of wiring in your backbox

2-wire
Single wire for both fan and light

3-wire
Separate wires for fan and light

Some fan / lights have a limiter. Please note that Lutron fan controls with a dimmer may not perform as intended when used with a fan / light with a limiter.

Although most fans are alternating current (AC) fans, some newer fans are available with DC. Please note that Lutron fan controls are not designed to control DC fans.

Exhaust fan controls

Maestro
MA-T51

Rotary
FS-5F

lutron.com/fans