PHILIPS ANDERIC Master RRH100, RRH200, RRHC100 Manual

PHILIPS ANDERIC Master

Introduction

We want to thank you for purchasing this Universal Hospitality remote by Anderic®. With the purchase of this remote you should receive a screw for the battery cover. Battery cover screw is optional; battery cover does not need screw to hold it in place. This remote requires two AAA size batteries, not included.

Optional Security Cable Attachment
Optional Security Cable available from anderic.com, Part number: CBL01. This cable easily adheres under the battery cover for a secure and flush appearance.

Pre-programmed Codes

This remote is pre-programmed by default to LG and VIZIO TVs under TV mode and DirecTv under STB Mode (Set-Top-Box). If the TV or STB is not one of the brands above, you must program the remote using the directions below:

NOTE: If [S] key is not present on your remote, note that it is the unmarked button to the right of the [POWER] key.

Programming the remote: Direct Code Input Method

Turn on the device you want to control, and find the corresponding brand code from attached code list.
Press and release the device mode key you would like to program ([TV] or [STB]).
Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Input the four digits code. If remote successfully saved code, indicator light will go out. If error, indicator light will blink slowly three times and go out, repeat steps 1-4.
a. Check if most keys of remote control can control the device, if not, please restart step 1-4 using a different code.
b. After trying all codes for your brand without success, please try “Programming the remote – Code Search” method below.

Note: During the programming mode, pressing any button other than number buttons or not pressing any button for 10 seconds will cause remote to exit programming mode.

Programming the remote: Code Search Method

Note: use this method if your brand is not listed in the codes attached, or if all the codes you tried does not work. This method scans through each code in the database.

Manual search

Turn on the device you want to control.
Press and release the device mode key you would like to program ([TV] or [STB]).
Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Repeatedly Press [CH+] to search forwards or [CH-] to search backwards; remote will send the code of POWER one by one.
When device is turned off, immediately press [S] button to save and exit. Check if most keys of remote can control the device, if not, please restart from step 1, remote will pick up where it left off in code database.

Auto search

Turn on the device you want to control.
Press and release the device mode key you would like to program ([TV] or [STB]).
Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Press and release [POWER] key, mode indicator light will blink one time and continue to blink every 2 seconds. Remote is sending codes of POWER one by one. If to press [CH+] / [CH-] can change the searching direction.
When device is turned off, immediately press [S] button to save and exit. Check if most keys of remote can control the device, if not, please restart from step 1, remote will pick up where it left off in code database.

Code Display

About: use this method to display the code that is currently programmed.

Press and release the device mode key ([TV] or [STB]) in which you want to display programmed code for, then follow steps below:
a. Press and release keys [MUTE] and [1] simultaneously, then release. The LED flashing times represents the first digit of code. Note: If digit is 0, the LED will not flash.
b. Press and release keys [MUTE] and [2] simultaneously, then release. The LED flashing times represents the second digit of code.
c. Press and release keys [MUTE] and [3] simultaneously, then release. The LED flashing times represents the third digit of code.
d. Press and release keys [MUTE] and [4] simultaneously, then release. The LED flashing times represents the fourth digit of code.

Note: If digit is 0, the LED will not flash.

Single Press Combined POWER Key

About: This allows for powering on/off both your TV and STB (Set-top-box) with one press of the [POWER] button. If enabled, pressing [POWER] key will send code for power for both units. If disabled, pressing [POWER] key will only send code for TV. See steps below.

Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Device mode indicator light will light. It doesn’t matter which mode lights.
Input code [9] [9] [9] [5].
a. Enabled – (0 blinks): If LED turns off directly after inputting the four digits, this indicates that “one key power-off all devices” was successfully Enabled;
b. Disabled – (2 blinks): If LED blinks 2 times after inputting the four digits, this indicates that “one key power-off all devices” was successfully Disabled.

Note: After one key power-off all devices successfully enabled, press [POWER] key, it will send STB Power immediately followed by TV Power code.

STB (set-top-box) Punch-Through Function

About: When enabled, this feature allows assigning the STB related keys to always send codes programmed under STB mode, no matter what mode the remote currently resides. This feature has been enabled by default. Keys affected are: 0 thru 9, Enter, Prev CH, CC, CH+ and CH-. Follow steps below to enable or disable this feature.

Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Device mode indicator light will light. It doesn’t matter which mode lights.
Input code [9] [9] [9] [0].
a. Enabled – (0 blinks): If LED turns off directly after inputting the four digits, this indicates that “STB punch-through” was successfully enabled;
b. Disabled – (2 blinks): If LED blinks 2 times after inputting the four digits; this indicates that “STB punch-through” was successfully disabled.

TV Punch-Through Function

About: When enabled, this feature allows assigning all TV related keys to always send codes programmed under TV mode, no matter what mode the remote currently resides. This feature has been enabled by default. Keys affected are Power, VOL+, VOL-, Mute, Input and Sleep. Follow steps below to enable or disable this feature.

Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Device mode indicator light will light. It doesn’t matter which mode lights.
Input code [9] [9] [9] [1].
a. Enabled – (0 blinks): If LED turns off directly after inputting the four digits, this indicates that “TV punch-through” was successfully enabled;
b. Disabled – (2 blinks): If LED blinks 2 times after inputting the four digits; this indicates that “TV punch-through” was successfully disabled.

Individually assign key Punch-through Lock

Note: Before proceeding; the following features must be first DISABLED: “TV Punch-through Function,” “STB punch-through Function,” and “Single Press Combined Power Key.”
About: This allows for individually assigning keys to “punch-through” to the mode of your choosing. After enabling punch-through, the key will always send code for assigned mode no matter what mode the remote currently resides.

Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light nlights and remains on, release both keys.
Input the 2 digits code [9] [8].
Press the button you want to lock.
Press the device mode button you want assign it to (e.g. [TV] or [STB])
a. If successful, LED will turn off directly after pressing the Mode button. Repeat steps 1 – 4 for each button lock.

Notes: Applicable to all buttons except for: [S], [TV], [STB]. To re-assign a key to different mode, you first unlock the key using steps from Individually Assign Punch-through Unlock section below, then repeat steps 1-4 to reassign it to correct mode.

Individually Assign Punch-through Unlock

Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Input the three digits [9] [0] [0],
Press the button you want to unlock the punch-through, the LED will blink one time & turn off.

Device Mode Lock

About: This is used to lock the code for the device so they cannot be re-programmed. After device is locked, the current code cannot be changed, and any other operation is invalid unless you repeat steps 1- m3 to unlock first.

Press and release the device mode key you would like to lock code for ([TV] or [STB]).
Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Input code [9] [9] [9] [9],
a. Locked – If LED turns off directly after 4 digits input, it indicates mode successfully locked.
b. Unlocked – If LED blinks 2 times and turns off after 4 digits input, it indicates mode successfully unlocked.

Reset to Factory Default Status

Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Input code [9] [7] [6] [0]. Indicator light will turn off, indicating that the remote has been reset to factory default status.

Advanced Option: Shift remote to 1-Device; TV only remote.

Note: This feature allows remote to switch from a 2-Device remote to a 1-Device; TV only remote. STB mode will be deactivated. Remote will be reset to factory defaults for 1-Device.

Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Input code [9] [7] [6] [1]. Indicator light will blink 3 times, indicating that the remote has successfully been reset to factory default status and converted to a 1-Device remote.

Advanced Option: Shift remote to 2-Device; TV/STB remote.

Note: This feature allows remote to switch from a 1-Device remote to a 2-Device; TV and STB enabled remote. Both modes will be activated. Remote will be reset to factory defaults for 2-Device.

Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
Input code [9] [7] [6] [2]. Indicator light will blink 3 times, indicating that the remote has successfully been reset to factory default status and converted to a 2-Device remote.

TV CODES

Admiral	1917 1927
Advent	1933
Akai	1930 1939 1999 2025
AOC	1964 1985 2029 2032 2073
Apex Digital	1931 1934 1952 2065
Audiovox	1926 1937 2011 2012 2021 2035
Aventura	1922
Broksonic	1927 2025
Carver	1915
Celebrity	1911
Celera	1934
Changhong	1934
Citizen	1916 2025
Coby	1992 2049 2051 2054 2055 2056
Commercial Solutions	1971 1910
Crosley	1911 1915
Curtis	2057 2070
CurtisMathes	1910 1915 1916 1917 19191926 1930 1996
Daewoo	1926 1996
Dell	1957
Denon	1919
Dumont	1912
Durabrand	1922 1923 1927 2087 2088 2120 2121 2122 2123 2124 2125 2167 2168 2169 2170
	2171
Dynex	1974 2030 2038 2085 2086 2116 2117 2118 2119
Electroband	1911
Electrograph	2009
Electrohome	1927 1998
Element	2001 2023 2037
Emerson	1922 1923 1926 1927 1967 1996 1997 2019 2026
Emprex	1969
Envision	1964 1985 2029 2032
ESA	1939 1922 2026
Funai	1911 1922 2026
Gateway	2009
GE	1910 1913 1923 1926 1971 1981
GFM	1922 1997 2026 2036
Gibralter	1912
GoldStar	1923
Haier	2007 2008 2050
Hallmark	1923
Hannspree	1962

Harman/
Kardon	1915
Havermy	1917
Hello Kitty	1926
Hisense	1931 1995 2033 2058 2089 2090 2091 2092 2093 2126 2127 2128 2129 2130 2131
	2172 2173 2174 2175
Hitachi	1994 1919
iLo	1967 1997 2000
Infnity	1915
Insignia	1970 1983 1927 1922 1995 2002 2024 2026 2030 20942095 2096 2097 2098 20992101
	2102 2103 2104 21052106 2107 2108 2109 21102111 2132 2133 2134 2135 2316 2137
	2318 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2167 2176
Inteq	1912
JBL	1915
JCB	1911
Jensen	1933
JVC	1914 1927 1955 1987 2013 2045
KDS	1977 2001
KLH	1934
LG	1970 1971 1912 1923 2059 2066
LXI	1910 1915 1921 1923
MAG	1977 2001
Magnavox	1913 1915 1922 1937 1964 1972 2018 2009 2020 2026 2062
Marantz	1972 1915
Matsushita	1924
Maxent	2009
MB Quart	2021
Megatron	1919 1923
Memorex	1920 19231927 1998 2024
MGA	1920 1923
Midland	1910 1912 1913
Mitsubishi	1917 1920 1923 1954
Motorola	1917
MTC	1916
NAD	1921 1923
NEC	2015
NetTV	2009
Nexus
Electronics	2037
Nikko	1923
Norcent	1931 1964 1985
Olevia	1953 1961 1989
Optimus	1924
Optoma	1962
Optonica	1917
Orion	1927 1974

Panasonic	1913 1924 1959 1973 1975 2045
PARK	2034 2041
Penney	1910 1921 1913 1916 1923
Petters	1979
Philco	1915 1922 1967 1997 2026
Philips	1915 1972 2020 2006 2018 2062 2063
Pioneer	1973
Polaroid	1934 1958 1977 1979 2001 2011 2012 2035
Portland	1926 1996
Prima	1933
Prism	1913
Proscan	1910 1971 2044
Proton	1923
Proview	1977 2001
Pulsar	1912
Quasar	1913 1924
RadioShack	1910 1923
RCA	1910 1913 1917 1971 1981 1996 2014 2040 2042 2067
Realistic	1923
Runco	1912
Sampo	2009
Samsung	1916 1923 1930 1939 1948 2031
Sansui	1922 1927 1998 2024 2025
Sanyo	1915 1950
Sceptre	1945 1952 1963 1986 2081
Scotch	1923
Scott	1923 2003
Sears	1910 1915 1921 1923 1922
Sharp	1917 1940
Sheng Chia	1917
Signature	1915
Sony	1911 1938
Soundesign	1923
Soyo	2017
Spectroniq	1977 2001
Squareview	1922
Superscan	1917
Supreme	1911
SVA	1931 2026
Sylvania	1915 1922 1967 1997 2019 2023 2026
Symphonic	1922
Syntax	1953 1961 1989
Tandy	1917
Technics	1913 1924
Techwood	1913
Teknika	1915 1916 1920

Telefunken	1930
TMK	1923
TNCi	1912
Toshiba	1916 1921 1959 1980 2025 2028
TVS	1927
Victor	1914
Vidikron	1915
Vidtech	1923
Viewsonic	1946 1960 1964 1984 1991 1993 2005 2009 2029 2032 2046
Viore	2000 2034 2057 2112 21502151 2152 2153 2154
Vizio	2010 1946 2314
Wards	1910 1911 1912 1913 1915 1916 1921 1923
Waycon	1921
Westinghouse	1926 1946 1952 2004 2113 2114 2115 2156 2155 2157 2158 2159 2160 2161 2162
	2163 2155 2164 2165 2166 2177 2178
White
Westinghouse	1927 1996
Wyse	1964
Zenith	1910 1911 1912 1919 19231927 1970 1996

LG Hospitality Codes

Note: These codes work with LG TVs and the STB-2000 set to boxes.

BED 0	2314
BED 1	2315
BED 2	2316
BED 3	2317
BED 4	2318
BED 5	2319
BED 6	2320
BED 7	2321
BED 8	2322
BED 9	2323

Digital TV Converter Boxes

Note: These codes can only be programmed under STB mode.

Access HD	2039
Airlink 101	2080
Alpha Digital	2039
AMTC	2039
Apex Digital	2072
Artec	2079

CASTi	2048
Channel
Master	2061
Coby	2083
Coship	2076
Daewoo	2053
Daytek	2048
Digital Stream	2047
Dish Network	2071
Echostar	2071
GE	2060 2068
Goodmind	2068
Gridlink	2056
Insignia	1968
Lasonic	2056
Magnavox	1982
Memorex	2075
MicroGEM	2078
Philco	1982
RCA	2052 2069
Sansonic	2056
Sunkey	2084
Sylvania	1982
Tivax	2039
Ventura	2069
Venturer	2069
Winegard	2069
Zenith	1968
Zentech	2080
Zinwell	2077

CABLE