Smart Pods Pro
Premium Wireless Pods
All POM Gear products are developed to give users Peace Of Mind. In today’s hectic world, managing our on-the-go lifestyle is a challenge of its own. POM’s mission is to create products that provide simple solutions by combining the latest technology and top-quality materials to exceed all expectations. We’re sure you will have an enjoyable user experience.
To get the most of your new POM Gear product, please read the user manual carefully before use. www.pomgear.com
- MULTIFUNCTION BUTTON
- LED INDICATOR
- CHARGING PORT
- MICROPHONE
- CHARGING CONTACTS
We strongly recommend fully charging the Smart Pods Pro before first use. To do so, place them in their charging case until the red blinking light on the case goes out. FIRST TIME USE SYNC Right & Left Smart Pods Pro to each other
- Remove the Smart Pods Pro from their charging case The Smart Pods Pro will automatically Power On. To manually power them On, simply Press & Hold down the Multifunction button(1).
- The LED lights (2) on the Smart Pods Pro will Blink Red/Blue indicating Auto SYNC mode.
- You do not need to do anything at this stage. Smart Pods Pro will Auto SYNC in about 5-10 seconds. When either one of the Smart Pods Pro stops to blink Red/Blue, this indicates that both Right & Left Smart Pods Pro are SYNC’d to each other. Now you can PAIR them to your cell phone.
PAIR Smart Pods Pro to your cell phone
- Navigate to Bluetooth° settings on your cell phone.
- Turn Bluetooth° On and select “POM Gear Smart Pods Pro” from the list of available devices. When paired, the LED lights(2) on the Smart Pods Pro will slowly blink Blue. You can now use the Smart Pods Pro to listen to music or take calls.
AUTO-PAW USE
Once your Smart Pods Pro is paired to your device for the first time, you no longer need to pal, at. The Smart Pods Pro should Auto-SYNC to each other and Auto-PAIR to your device whenever removed from their charging case / powered on. You can now use the Smart Pods Pro to listen to music and make phone calls. If this does not work, make sure Nuetooth’ on your device Is turned ON and In discoverable mode (not connected to another device). Power your Smart Pods Pro Off and then back On again. It you continue to experience any issues, please reach out to our customer support dept. for assistance at 1-800-778-3513 ext: 102 or by e-mail:
Press and hold the Multifunction button(1) on the Smart Pods Pro to power them on or off.
Press the Multifunction button(1) to Pause/Play music.
To accept incoming calls press the Multifunction button(1) once. To reject a call press and hold the Multifunction button(1) down.
To redial press the Multifunction button(1) twice. On phone calls, earbuds wiN operate as both the microphone and the speaker.
The Smart Pods Pro can recharge inside of their storage case. To do so, place pods in the charging case, and the pods will begin to recharge. After recharging the buds a few times, the carrying case will need to be recharged. To recharge the carrying case, plug the included Micro USB Cable into the Micro USB Port (5) on the back of the unit. When the case is charging the LED indicator light flashes Red. When fully charged, the LED indicator will hold a solid Red light. The earbuds and case will not charge simultaneously. Once the case is recharged you can begin charging the earbuds.
If you have the Google Assistant app running on your mobile device, while using the Smart Pods Pro you press twice on the multifunction button to begin commanding the Google Assistant. Try commands such as “What is the weather?” and the Google Assistant should respond. Please note that due to Bluetooth° Connection Google Assistant’s response may be slightly delayed. If the Smart Pods Pro does not respond to voice prompt, double-check that your device is correctly connected to the Smart Pods PRO via Bluetooth°.
If the Google Assistant still does not respond to voice prompts do the following: Open the Google Assistant App. Navigate to Settings. Choose “Voice”. Choose “Ok Google Detection”. Follow prompts on-screen to reactivate Google Assistant.
HOW TO USE SIRI®
With your iOS device connected to the Smart Pods Pro, you press twice on the multifunction button to open SO on your device. The Smart Pods Pro should now work with Sid and operate according to your commands.
Try commands such as “What day is today?” and Sid should respond.
If the Smart Pods Pro does not respond to voice prompts, double-check that your device is correctly connected to the Smart Pods Pro via Bluetooth.
If Siri still does not respond to voice prompts do the following: On your iOS device, go to Settings. Navigate to “Sid’ & Search” and enable “Listen for Hey Siri.
FIND US
@pomgear
Specifications
| Bluetooth | V5.0 |
| Operation Range | 33 Ft/360° |
| Frequency Range | 2.4 GHZ |
| Earbud Battery | 40 mAh |
| Charging Case Battery | 300 mAh |
©2021 Porn Gear All Rights Reserved. All Other Trademarks And Trade Names Are Those Of Their Respective Owners. The Illustrated Product And Specifications May Differ Slightly From That Supplied Due To Ongoing Enhancements.
Manufactured in China.
Corporate Address: 1407 Broadway, New York, NY 10018
WARRANTY AND LIMITATIONS:
Limited 3 Year Warranty. To activate the product warranty go to our website www.pomgear.com and register this product. The guarantee will not be applied to the damages caused by faulty usage.
Products that have been subjected to abuse, misuse, accident, alteration, modification, tampering, negligence, faulty connection, attachment to any unauthorized accessory, lack of responsible care, repair, or service in any way that is not mentioned in this manual for the product. Such as any damage caused by dust, wetness, coldness, overheating, placement near hot objects near fire storage, or use of corrosive elements. No warranty in damage caused by natural disasters such as floods, fires, typhoons, earthquakes, and related matters. To the extent permitted by law, POM GEAR Inc. Shall not be liable for damages beyond replacing the defective product.
WARNINGS AND NOTES
- Do not store units in a high-temperature environment, including intense sunlight or heat. Do not place the unit near fire or other excessively hot environments.
- Be cautious of excessive drops, bumps, abrasions, or other types of impact. If there is any damage to the battery such as dents, punctures, tears, deformities of corrosion, due to any cause, discontinue use and contact manufacturer or dispose of appropriately.
- Do not disassemble or attempt to modify or replace any part of this unit.
- Do not expose the unit to moisture, snow or submerge it in liquid.
- Do not use units in the vicinity of flammable fumes or gases (such as propane tanks or large engines).
- Do not attempt to operate the unit using any other method than directed. T
TECHNICAL SUPPORT:
Please do not attempt to fix the product by yourself. If you are experiencing any problems with the product, you can contact a Pom Gear representative and they will assist you with any questions, problems, or concerns you may have. Send an email to
FCC NOTICE TO USERS:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void the user’s authority to operate the device.
CE NOTICE TO USERS: Hereby, POM Gear Inc. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Declaration of Confirmation Additional Information FCC ID: 2AH16NEWELL
ADDITIONAL INFORMATION
- Radio Frequency: This POM Gear Bluetooth” headset, is a radio transmitter and receiver. When in operation it communicates with a POM Gear Bluetooth’ equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2.4 to 2.480 GHz. Your POM Gear Bluetooth headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when using any compatible mobile phone.
- Battery information: A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above +60°C(+140°F) or under -20°C(-4°F). For maximum battery capacity, use the battery at room temperature.
If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10°C(+50°F) and +45°C (+113°F). For your safety, do not remove the battery incorporated in the product. Please only charge using included charging cable for correct frequency charging. if you need to replace the battery, contact POM Gear Inc. at for assistance. Recycling the battery in your POM Gear Bluetooth€ headset requires that it be disposed of properly and should never be placed in municipal waste. If POM Gear Inc. removes the battery it will be disposed of according to local regulations.
Emergency calls: This POM Gear Bitietooth headset and the electronic device connected to the headset operate using radio signals, mobile, and landline networks as well as user-programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential emergency calls. Remember, in order to make or receive calls, the headset and the electronic device connected to the headset must be switched on and in a service area with adequate mobile signal strength. Emergency calls may not be possible on all mobile phone networks or when certain network services and/or phone features are in use. Check with your local service provider.
Cellular Empire INC declares that radio equipment P2G-SP9 is in compliance with Directive 2014/53/EU. The EU Declaration of Conformity is available at: http://www.pomgear.com/EU
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction