Rocketfish RF-HG100F18,100 ft Fiber Optic HDMI Cable manual

Rocketfish RF-HG100F18,100 ft Fiber Optic HDMI Cable

FEATURES

• Supports up to 4K Ultra HD (4096 × 2160) resolution to get the very best picture from your 4K source
• High Dynamic Range (HDR) support to significantly increase the range of both color and contrast which creates an even
more vibrant and realistic picture
• Latest generation chipset and fiber optic cabling results in the best performance
• Fiber optic cable design allows for lossless transmission of high-bandwidth video and audio over extremely long lengths
• Micro USB power inputs available for supplemental power insertion in challenging installations. The need for supplemental power is uncommon, and it should only be required if no image displays or image problems occur. Micro USB cables and power supplies are not included.

SETTING UP YOUR HDMI CABLE

CAUTION: Do not bend the cable sharply (less than a .8 inch radius).

Plug the Source end of your HDMI cable into the source device (such as a Blu-ray player, cable/satellite box, or receiver).
Plug the Display end of your HDMI cable into the display (such as a TV, monitor, or projector).

Notes:

Your HDMI cable is directional. If you do not plug the correct end into the correct device, it will not work. Each end of your HDMI cable is labeled on the connector and with a yellow sticker.
If your HDMI cable is plugged in correctly and does not work properly, your HDMI cable may need supplemental power. Plug a micro USB cable (not included) into the micro USB port on each end of your HDMI cable, then connect the micro USB cables to power.

TROUBLESHOOTING

My display shows a black screen.
Make sure that each end of your HDMI cable is plugged into the correct device. If your HDMI cable is plugged in correctly, plug a micro USB cable (not included) into the micro USB port on each end of your HDMI cable, then connect the micro USB cables to power.
The audio or video cuts in and out.
Make sure that each end of your HDMI is plugged in fully and your cable is not bent.
My display shows static.
Make sure that you did not use an adapter or converter with your HDMI cable. If you did, remove the adapter or converter from your HDMI cable, then plug your HDMI cable directly into the source device or display.
My display does not show 4K content.
Make sure that all of your devices support 4K. You need a source device and a display that support 4K resolutions and 4K content on your source device.

Before using your new product, please read these instructions to prevent any damage

SPECIFICATIONS

Cable length: 100 ft. (30.5 m)
Cable diameter: .2 in. (5.2 mm)
Cable bending radius: 0.8 in. (20 mm)
Operating temperature: 32-131° F (0-55° C)
Storage temperature: -4-176° F (-20-80° C)
Interface: HDMI A Male to HDMI A Male
HDMI version: 2.0 (backwards compatible with all previous HDMI versions)
Maximum resolution: 4K (4096 × 2160 or 3840 × 2160) at 30 or 60Hz (YUV4:2:0 4K@60Hz; YUV4:4:4 4K@30Hz)
Full 3D support: Yes
Bandwidth speed: 18 Gbps
Audio specifications: 32 uncompressed audio channels; 1536kHz sample rates
Note: This product does not support Audio Return Channel (ARC).
This will not affect most users and does not degrade the signal quality.
Other specifications: HDCP 2.2; EDID; CEC
In-wall Installation: UL Certified, CL2

IMPORTANT SAFETY INFORMATION

Read these instructions.
Never pull on the cable to disconnect the connector end from a source or display.
Do not bend your HDMI cable too far. The bending radius at any point on your HDMI cable must be more than .8 in. (20 mm).
Do not expose your HDMI cable to water.
Do not use excessive force when installing your HDMI cable.
Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
Do not store your HDMI cable in an extremely cold, warm, or humid environment.
Do not dismantle your HDMI cable.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
ICES statement: CAN ICES-3 B/NMB-3 B

FIVE-YEAR LIMITED WARRANTY

Visit www.rocketfishproducts.com for details

CONTACT ROCKETFISH

For customer service, call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
www.rocketfishproducts.com

ROCKETFISH is a trademark of Best Buy and its affiliated companies.
Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China