Flight controller wiring
Note: Take UART3 for example
Betaflight 3.3 or above setting
Remote control
When connected, Mode LED will be on and the buzzer on Flight Controller will beep for 3 times; When disconnected, Mode LED will be off and the buzzer on Flight Controller will beep for 2 times only; If connected successfully, take Micro Swift 2 for example, you can long-press the up button to enter the OSD menu, right button to switch preset scenes, left button to calibrate voltage and down button to reset OSD.
OSD Menu
QUICK SETTINGS
Quick settings:
- Long press UP button for three seconds to access to the OSD setting‘s screen
- Long press LEFT button for three seconds to calibrate the voltage. When the voltage text flashes, press UP/DOWN button to adjust it
- Long press DOWN button for ten seconds to reset OSD settings to default
- Long press RIGHT button for three seconds to switch between the camera presets
OSD Menu
- CLR: clear the ID character;
- ALARM: low voltage warning value, smartly judge the warning value of the battery when it’s low; if set it manually, then it saves the manual preset value;
- SCENE: switch the camera presets among Personal / Lightrax / Outdoor/ Indoor/ Cloudy / Twilight
- Press the middle button to switch ON / OFF, then move to POS to enter the position adjustment.
Camera Menu
MAIN MENU
- LANGUAGE (English/中文)
- WHITE BAL (ATW1 / ATW2 / AWC→ SET /MANUAL: MANUAL)
- DPC (Cover the lens then press enter key)
EXPOSURE
- SHUTTER (AUTO / 50-100000 / FLK)
- BRIGHTNESS (50 / 0-255)
- AGC (OFF / LOW / MIDDLE / HIGH)
- DWDR (ON: 63 0-63 / OFF)
IMAGE ADJ
- LENS SHAD (OFF/ ON:22 0-255)
- CONTRAST (110 / 0-255)
- SHARPNESS (26 / 0-31)
- DISPLAY (CRT/LCD/USER)
- GAMMA (0.5 / 0.05-1.0)
- PED LEVEL (17 / 0-63)
- COLOR GAIN (176 / 0-255)
BACKLIGHT (BLC / HLC / OFF)
- AREA SEL (AREA1/AREA2)
- GAIN (042 / 0-255 )
- HEIGHT (4 / 0-10)
- WIDTH (3 / 0-9)
- LEFT/RIGHT (6 / 0-6)
- TOP/BOTTOM (10 / 0-10)
- LEVEL (200 / 0-255)
- MODE (ALL DAY / NIGHT ONLY )
DAY ＆ NIGHT（AUTO / COLOR / B&W / EXT)
- DAY NIGHT LEVEL (80 / 0-176)
- DAY NIGHT DELAY (3 / 1-30)
- NIGHT DAY LEVEL (032 / 0-255)
- NIGHT DAY DELAY (1 / 1-30)
- BURST (OFF/ON)
- IR SMART (OFF/ON)
- IR LEVEL (HIGH/LOW)
Parameters
| Model | RunCam Micro Swift 3 |
| Image Sensor | 1/3″ SONY Super HAD II CCD |
| Horizontal Resolution | 600TVL |
| Lens | 2.1mm (M12) FOV165° / 2.3mm(M12) FOV 150° |
| Signal System | PAL/NTSC |
| Integrated OSD | Yes |
| One Touch Scene Setting | Personal / Lightrax / Outdoor / Indoor / Cloudy /Twilight |
| S/N Ratio | >60dB (AGC OFF) |
| Electronic Shutter Speed | PAL: 1/50-100,000; NTSC: 1/60-100,000 |
| Auto Gain Control (AGC) | Yes |
| Min. Illumination | 0.01 [email protected] |
| WDR | D-WDR |
| DNR | 2DNR |
| Day/Night | Color/Auto/B&W |
| Remote Control | Flight Controllers : BetaFlight 33 / Butterflight 34/Cleanflight 22 |
| Power | DC 5-36V |
| Working Current | 60mA@12V / 120mA@5V |
| Net Weight | 9g(2.3mm) / 11g(2.1mm) |
| Dimensions | 19mm*19mm*25mm |
