SHARP Washing Machine ES-W85TWXT Manual

SHARP Washing Machine User Manual

ES-W95TWXT
ES-W85TWXT
Operation manual

Thank you for purchasing our product.

Please read this manual carefully before use.
Please read “Safety precautions” carefully before use.
Please keep this manual in a safe place.
Our product is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environment;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– areas for communal use in blocks of flats or in launderettes.

Safety precautions

CAUTION

To avoid accident /injury, if the power cord is damaged, it must only be replaced by an authorized service staff or contact the nearest Sharp Service Center for assistance.
If powder detergent or liquid detergent spill over the top lid, or other plastic components, wipe it away immediately, otherwise it may damage them.
Each time washing is finished, clean lint filter box. Otherwise it may not be effective in filtering lint.
The new hose-sets supplied with the appliances are to be used and that old hose-sets should not be reused.

Parts of the washing machine

Machine body

List of accessories

NOTE
＊ Bottom cover and Screw are applied by service staff.
• Keep the Operation manual and installation manual for future reference.

Specifications

Installation

See Installation manual for detail.

The way to check whether the product is installed correctly

Drain hose

If a floor drain is used, the height from the ground should not be under 10 cm.
If the drain hose is too high, the water supply will not stop. This time, you should adjust the drain hose so that the clearance to the floor is below 10cm, The water will drain out, and then start again.
Plug the drain hose into the drain port tightly. If the drain hose drops, water will flow to the ground and damage the floor.
Please do not plug the drain hose to the inside or bottom of washing machine.
Change the direction of drain hose

Cut the hose diagonally. (not easily blocked)

When the draining hose is not long enough, please use extension hose. The length of used extension hose should not exceed 1.5m. (The inner diameter of draining hose is about 3.8cm).

If the hose is too long, it can be cut off at the narrow part shown in the figure.

Key points in washing clothes

Pay extra attention to the following situations

Instruction on control panel functions

Control panel / Display

Things to know before washing

Select the course depending on the type of clothing or soiled level on clothing.
Once you press START/PAUSE key, you cannot change the course. When you want to change the course, turn off the power and select the desired course again.
LED indicator blinks when in operation, and lights when the course is selected.
The machine generates a beep and turns off when it finishes the course. The beep sound setting can be turned off by pressing COURSE key and AIR DRY key simultaneously after the operation starts.
When the motor gets hot beyond a safe limit, it fail-safes on itself, and can’t work enough. Do not operate the machines many times in a row.
In BLANKET course, fold the blanket as below.
In BLANKET course, keep the blanket below the line.

ECO SHOWER RINSE

Instruction on washing courses

Manual washing course

Additional operating procedure

Maintenance

Water inlet hose connecting port

Clean it every time after using

Washing / Spin Drying tub

Every time after washing, turn off the faucet and power. (If necessary, dismantle water inlet hose.)
Wipe the water in the tub after washing as soon as possible. Use clean soft cloth.
Be sure to pull out the plug from the plug socket during maintenance.
Hanging power cord and drain hose is desirable.
Open top lid for about 1 hour after cleaning the tub.
Do not use solvents such as alcohol, cleanser and so on, because they may cause damage to the surface of the tub.

TUB CLEAN

In the case of cleaning the washing / spin drying tub

Common non-fault phenomenon

(Please refer to this section if there is an abnormality happens.)

Abnormal display

Caution
It generates a beep when washing machine indicates abnormal display.
As the phenomenon may not be a fault, please check it again before sending the machine for repair. In the case of failure, please consult Sharp Service Center. Be sure not to disassemble and repair the machine without permission.