Sharper Image OWN ZONE Wireless Rechargeable TV Headphones
Specifications
- WIRELESS RANGE: 160-ft,
- BATTERY TIME: 20h,
- WIRE JACK: 3.5mm,
- TRANSMISSION MODE: UHF stereo,
- CARRIER FREQUENCY: 2.4GHz,
- OPERATION VOLTAGE (BASE UNIT): DC5V,
- OPERATION VOLTAGE (HEADPHONES): DC3.7V,
- FREQUENCY RESPONSE: 20Hz-20kHz,
- DISTORTION: <0.5% at 1KHz,
- S/N RATIO: <95Db,
- PRODUCT DIMENSIONS: 7.48 x 7.87 x 2.76 inches,
- ITEM WEIGHT: 1.06 pounds.
The OWN ZONE wireless tv headphones allow you to watch tv without disturbing others or being disturbed by others. You’ll be surrounded by full stereo sound. it’s very convenient. You can watch the game without being interrupted by children, or you can watch your favorite movie while your significant other sleeps next to you.
Connectivity
The headphones use 2.4Ghz digital technology to broadcast up to 100 feet and connect wirelessly to almost any tv in seconds. No pairing is necessary because the headphones operate right out of the box including all charging and audio cords, as well as an adjustable headband and super-soft ear cushions. Use one of the three provided cables to connect to your tv: AUX, RCA, or optical.
Design
The OWN ZONE headphones are easy to carry and easy to wear. The earcups are comfortable and well padded. These are made of very fine plastic. The controls are around the earcups.
What’s in the box
- Own Zone Headphone
- Transmitter
- Charging Cable
- RCA, AUX, Optical Cable.
Controls
Transmitter:
Headphones:
How to set OWN Zone headphones
- Connect the provided AC adapter to the transmitter base’s DC 5V socket on the rear. After that, connect the other end to an AC outlet.
- On the rear of the transmitter base, slide the Audio Signal switch to the ON position.
- The device is getting power if the blue power (lower) light glows.
How to charge the headphones
- Check that the transmitter base is properly connected as specified above.
- On the rear of the transmitter base, slide the Audio Signal switch to the OFF position.
- Disconnect the TV Wireless Headphones from the power source and set them on the transmitter base.
- While the headphones are charging, the power light on the transmitter base will turn RED. When the headphones are completely charged or in operation, the power light on the transmitter base will turn BLUE.
- When not in use, place your TV Wireless Headphones on the base.
How to connect to TV with wire
- Use the provided 3.5mm audio cable with the headphone jack. One end should be plugged into the TV’s headphone socket.
- Connect the other end to the Audio In jack on the transmitter base’s rear.
- Check for red and white Audio Out jacks on your television (also called RCA jacks).
- If this is the case, connect the provided RCA to 3.5mm converter cable to your TV’s Audio Out connectors.
- Then connect the adapter to the provided 3.5mm cable and the other end of the 3.5mm cable to the Audio In port on the back of the transmitter base.
How to connect to TV with a wireless system
- On the right side of the headphones, press the Power button.
- When the connection is complete, the indicator light will turn GREEN. Within 5 seconds, the headphones will automatically connect.
- Please remove your headphones. The Vol+ and Vol- buttons on the left side of the headphones may be used to adjust the volume. Through the headphones, you should now be able to hear your TV.
PROS
- Good sound quality.
- Best to watch TV.
- Easy to use.
CONS
- Heavy in weight.
Verdict
If you are looking for a budget-friendly product with good sound quality and the best advanced features, Own Zone headphones are the best products.
Frequently Ask Question
- When it comes to Sharper Image headphones, how long do they last?
Enjoy crystal-clear sound for your music, movies, and phone conversations. This case is small enough to fit in your pocket. Bring it with you almost everywhere for up to 16 hours of gameplay and 4 hours of standby time on a single charge. With only 10 minutes in the case, you may get another hour. - What is the best way to connect my Sharper Image headphones to my television?
One end should be plugged into the TV’s headphone socket. Connect the other end to the Audio In jack on the transmitter base’s rear. Check for red and white Audio Out jacks on your television (also called RCA jacks). If this is the case, connect the provided RCA to 3.5mm converter cable to your TV’s Audio Out connectors. - What is the best way to charge your zone headphones?
Connect the tiny end of the micro-USB cable (included) to the headphones’ micro-USB port. 2. Connect the cable’s big end to a USB power source (i.e., computer, phone charger, 5V USB Adapter). - What does a red Bluetooth light mean?
What exactly is this? When the red or amber light on your headphones flashes, it typically implies the battery is low. An orange light indicates that the battery is at a medium level and that the headphones will need to be charged in a few hours. It’s also possible that the headphones are in the process of charging - How can I tell whether my Bluetooth headset is fully charged?
To charge the Bluetooth headset, follow these steps:
When the battery is charging, the indicator light will turn on. The light may take up to one minute to turn on. 3. The indication light will turn off when the headset’s battery is fully charged (approximately 2-3 hours).
