Hongxin Weichuang
Technology 2.4G Air Mouse & Fidelity Voice Input Remote
User Manual
Thank you for using the product of our company!
This is a wireless air mouse with a built-in axis gyroscope and gravity acceleration sensor and fidelity voice input; it can perform the functions of traditional remote control, computer mouse, and gaming motion controller on the android platform. Plug and play micro receiver is compatible with personal computers, projectors, TV boxes, Home Theater Personal computers, etc.
Holding an air mouse and rotating your wrist is converted into a movement of a cursor across the screen and it allows you to control your computer, projector, and other entertainment equipment from a distance.
Ergonomics of air mouse will replace stationary computer mouse and infrared button remote control giving you the convenience to manage your computer and television set from a position which is most comfortable for you.
IR Learning ( take the example of learning the “power” button)
- Keep pressing the “Power” button.
The air mouse enters IR learning mode when the LED flashes slowly. - Press the “power” button when you aim the IR transmitter with the air mouse.
Air mouse receives the code successfully if LED light. - LED flashes slowly means that the Air mouse has finished learning.
- Data will be saved automatically and the product will exit learning mode.
- Press “OK”+ “DEL” to clean the code up.
Air Mouse has 3 levels of cursor speed.
From slow to fast: Press and hold the “ok” and ” Volume+” buttons.
The speed adjusts one level when the LED light is on.
From fast to slow:
Press and hold the “ok” and ” Volume-” buttons.
The speed adjusts one level when the LED light is on.
Function Keys :
Home: Go back the home;
Return: Go back to the previous screen;
OK: Confirm action or insert cursor;
Cursor Locking: Press to lock the air mouse, press again to unlock;
Play/Pause: Multimedia play/pause.
Voice Switch:
Press and hold “Voice Switch” to turn on the voice channel. Release the key to turn off the voice channel.
Low battery reminder:
The red light flashes slowly when the AAA battery power of the product is lower than 2V. It means that the battery needs to be replaced at this time.
Sensor Calibration Automatic calibration:
The changes in voltage and temperature may make the cursor drift. In this case, put the mouse flat on the desk and remain still. You can complete calibration by pressing any key to wake it up when it is in hibernation mode.
How to Use
For initial use, plug a USB receiver into the USB port of the device and wait for 20-60 seconds to install the driver of the USB receiver. Move the mouse, the mouse cursor can move on the screen means that pairing is successful. If it is unsuccessful, press and hold the “OK” and “Home” buttons, LED light begins to flash. Pairing is successful when the LED lights stop flashing.
Product specifications
- Transmission method: 2.4G RF wireless
- Sensors: 6 axis Gyroscope
- Number of keys: 17
- Range: >10m
- Battery Type: AAA*2
- Material: ABS Plastic and silicone
- Size: 143*45*29MM
- Weight: 50g
Note:
- Non-professionals are prohibited to use the test mode of the product. Under normal use, re-install the battery to restore it If the red light is always lit.
- IR Learning only for the “power” key.
- This product is divided into gyroscope version and no gyroscope version,
Gyroscope version: Swing your wrist to control the direction and movement of the mouse pointer!
Gyroscope-free version: Move the mouse pointer by pressing “up”, “down”, “left” and “right” buttons on a virtual mouse.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment