Skullcandy S2FYW Mod True Wireless Earbuds User Guide
Let’s get started
Take the earbuds out of the charging case and remove the protective stickers from the charging points.
- Place the earbuds in the charging case. The LEDs turn red. Remove the earbuds from the case.
- Open Bluetooth settings on your device. Select Mod from the list of available devices.
- Accept any PAIR or OK prompts. Your earbuds will connect to your device. They are now ready to use.
Download the App
Toggle controls. access user guides and register your product through the Skullcandy App.
Power On/Off
Remove the earbuds from the case to power ON and connect. Place the earbuds in the case to power the earbuds OFF and charge. To manually power ON your earbuds press and hold for 1 second, and to power OFF press and hold for 4 seconds.
No audio in one earbud?
Let’s re-sync your earbuds, Place them In the charging case and ensure the LED’s both turn RED. When removed, both earbuds should play audio. If not, return the earbuds to the case and follow the steps below.
0 On your device, open Bluetooth settings and turn Bluetooth OFF. 0 0 Press BOTH earbuds 3 times. The LED’s will flash Red/Blue as the earbuds re-sync, once successful both earbuds will flash Blue together 4x.
Remove both earbuds from the charging case. Make sure they are both powered ON.
Resetting your earbuds to resolve pairing issues.
On your device, open your Bluetooth settings and remove “Mod” from your paired
devices list, Then turn Bluetooth OFF. Remove both earbuds from the case. A tone will indicate that your earbuds are powered ON. Press and hold both earbuds for 3 seconds.
Both earbuds will flash Red 2x and then Blue 2x, a tone will indicate a successful reset, and your earbuds will enter back into Pairing Mode.
On your device, open Bluetooth settings and turn Bluetooth ON, Select “Mod” and accept any PAIR or OK prompts to complete pairing.
