STEALTH CAM QV20 20MP IR Trail Camera Manual

STEALTH CAM QV20 20MP IR Trail Camera

Device Features

Camera Overview

Set-up Guide

Insert Batteries and SD Card
Install 8 AA batteries and a class 10 SD card into camera.

Mount Camera Mount the camera at the desired location using the strap mount, Python Lock cable, Articulating Ball Joint Mount, or other desired mounting mechanism. Position the camera so that it does not face East or West directly as the rising and setting of the sun can cause false-positive triggers.

Activate Camera

Set camera to “On” position and place in desired vantage point to start capturing photos of game.

Camera Care
Operating Conditions
This camera is designed to function in 14°F – 104°F (10°C – 40°C). 20%-85% relative humidity, non-condensing.

Product Care

When not in use, store the camera in a cool, dust-free, environment.
Handle the camera with care
The camera is weather-resistant only. Do no fully submerge the camera in water or other liquid. Doing so will void camera warranty.
Only use the same type of battery to power the camera. Do not mix old and new batteries.
Do not touch the camera lens directly. Clean only with soft lens cloth.
Use a damp cloth to clean. DO NOT submerge the camera.
Remove batteries when the camera is not in use for an extended time.
Do not open camera housing to access internal parts. Doing so could damage the camera and void the warranty.
Notice The camera is an active electronic device. Attempting to service internal parts may expose you to dangerous voltages and other risks.

Camera Setup

Battery Installation

To remove batteries from unit, simply open camera, and slide the battery release switch to the left. Once the battery compartment is open, insert batteries into camera, being careful to match the orientation marked on your camera. After batteries are inserted, close the battery compartment and secure the battery release switch.

SD Card InstallationSD card slot is located on the bottom of the camera, above the battery compartment. Insert SD card with the label facing back of camera. Only minimal resistance should be felt as card is inserted and a click when the card is fully inserted.

Camera Configuration
Cycle between camera modes by pressing the UP and DOWN arrows. The camera mode will be displayed on the left side of the LCD Screen. This camera comes equipped with two Quick Sets (QSET) containing some of our most popular configurations. QSET 1 and 2 are defined in the table below. For alternate configurations, press the UP or DOWN arrows until CUSTOM is displayed on the left of the LCD screen and press ENTER.

Name	Quality	Timeout Delay	Detail
QSET 1	Med	30s	1 Photo
QSET 2	Med	30s	10 sec Video

Continue to next page for more information regarding each setting.

Custom Settings

DATE: This setting allows you to enter the date as it will appear on the info bar of each photo.
OPERATION MODE: The operation mode setting is a ccessible immediately after the Time setting. The screen will be blank with either Video or Photo displayed on the right side of screen. Press Enter to change between Photo and Video mode
TIME: This setting allows you to enter the time as it will appear on the info bar of each photo.

Advanced Options
To navigate to the following advanced options, PRESS and HOLD ENTER button.

will completely format the SD card inserted into the camera. Formatting an SD card will completely erase any data present on the card. It is recommended to format an SD card before use inside a Stealth Cam camera.
RESET: Selecting “Yes” on this option will reset every setting back to the default configuration. Selecting “Yes” will completely wipe your custom configuration.

PHOTO
: In this mode the camera will take a photo when trigger is activated activated.

PHOTO RES: This setting will determine the megapixel (MP) resolution of each image. A higher MP count will result in better photos and take more memory space. OPTIONS: High | Med | Low
DELAY: This setting is used to determine how long the camera will wait before restarting sensor after taking a photo. OPTIONS 5 sec| 10 sec | 15 sec | 30 sec | 60 sec | 120 sec
PHOTO BURST: This setting determines how many photos are taken each time the camera is activated. OPTIONS: 1 photo – 3 photos

VIDEO:
In this mode the camera will take a video when trigger is activated.

DELAY: This setting is used to determine how long the camera will wait before restarting sensor after taking a video. OPTIONS: 5 sec| 10 sec | 15 sec | 30 sec | 60 sec | 120 sec
VIDEO LENGTH: This setting is used to determine the length of time, in seconds, of a video recording. OPTIONS: 5 sec | 10 sec | 15 sec | 30 sec

Viewing and Deleting Images

There are a couple of methods for viewing and deleting your files.

Using an SD Memory Card Reader/Viewer available from our website. You will simply need to remove the SD card from the camera and insert it into the Reader to view the files; you can also delete them from this device.
Using your computer. Your computer would need to have an SD card slot installed for this to work. Please refer to your computer’s Owner’s Manual for the proper way of viewing the files.
Obtain a mobile device adapter. This will allow you to plug one end into the device and the other end insert the SD card. Please refer to the vendor’s User Manual for the proper way of viewing the files.

Frequently Asked Questions

Q: Will I lose my images and settings if the batteries die?
A: You will lose your settings but not your images. The images are stored on your external SD memory card so your images will be intact only on your card.
Q: Why is my camera taking pictures with nothing in front of it?
A: This camera is powered by motion activation. This can cause objects, like a tree branch or moving water, within the camera frame to cause the camera to take a photo.
Q: Is my camera waterproof?
A: No, your camera is weather resistant but not waterproof.
Q: Is there a warranty that comes with my camera or an extended warranty I can purchase?
A: Your Stealth Cam Camera comes with a Limited 1-year warranty. Please contact support at 1.877.269.8490 for more information.
Q: Can I mix batteries together?
A: No, you should never mix batteries. After your camera batteries die, always install brand new batteries in your camera.
Q: Can I use rechargeable batteries in the camera?
A: Rechargeable batteries can be used but will cause battery percentage to be reported incorrectly.
Q: Do I need to recharge my 12V Battery Kit during the seasons if it’s not in use?
A: The 12V Battery Kit should be recharge at least every 3 months, regardless if it is being used or not, in order to preserve the working condition of the battery inside the unit.

To ensure optimum performance of your Stealth Cam camera, it’s best to always check for periodical free software updates. For the latest firmware downloads, please check http://www.stealthcam.com/downloads Sign up for our weekly newsletter to stay informed on updates & new product news.

FCC COMPLIANCE

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device.

Product specifications are subject to change. Good Sportsman Marketing, LLC is not responsible for any photographic or typographical errors.
May be protected by one or more U.S. Patent numbers: 6,735,387 / 6,768,868 / 6,834,162 / 7,149,422 / 7,308,196 / 7,593,632 / 7,710,457 / 8,895,926.

IC WARNING
This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device. This equipment meets the exemption from the routine evaluation limits in section of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Limited Warranty Information

Your Stealth Cam scouting camera is covered by a 365 Day Limited Warranty on parts and labor from the date of original purchase, and purchases must be made through an authorized dealer. The warranty covers defects in workmanship and materials. The warranty does not apply to units, which have been damaged or abused intentionally or unintentionally. A purchase from individuals or unauthorized Internet sites such as eBay voids the warranty. Tampering with or altering the unit will void the warranty. Any unauthorized service will void warranty. A copy of your original sales receipt must be produced for any warranty service and a Return Authorization (RA) number must be obtained from customer service at 877-269-8490 prior to returning product. Stealth Cam is not responsible for any lost untraceable packages or those without a Return Authorization at the time of return.

Notice
To ensure the product is being utilized to its full potential, we recommend checking our website for new product updates. If your camera is having an issue, please check the website to determine you are using the latest firmware or software version.

Contact Us

TECHNICAL SUPPORT EMAIL:
[email protected]
Please allow 48 hours for email response.

STEALTH CAM LLC
P.O. Box 535189
Grand Prairie, TX 75053-9504
WEBSITE: www.stealthcam.com