ARCTIS
PRODUCT INFORMATION GUIDE
WELCOME TO ARCTIS
Your new headset is the result of taking everything amazing about the Arctis line and bringing it to the Xbox for the first time. Enjoy the award-winning audio, the best mic in gaming, and of course true Xbox Wireless. Congrats on your gaming audio upgrade!
STEELSERIES ENGINE
Download SteelSeries Engine to customize your audio settings and check for firmware updates:
PRODUCT OVERVIEW
Ski goggle headband*
Airweave ear cushions*
ClearCast microphone
USB charging cable
ChatMix dial
Volume control
Microphone mute button
Bluetooth button
Power button
Micro-USB jack (for charging & firmware updates)
Headphone share jack
Find accessories and replacement parts at steelseries.com/gaming-accessories
SETUP
SKI GOGGLE HEADBAND
POWER ON/OFF
BLUETOOTH
PAIRING
With the headset powered on, press and hold the Bluetooth button for 6 seconds. The headset LED will rapidly blink blue.
In your device’s Bluetooth settings, scan for available devices and select ’Arctis 9X’
CONTROL
Answer/end voice call single · press Bluetooth button
Play/pause music single · press Bluetooth button
Next track double · · press Bluetooth button
Previous track triple · · · press Bluetooth button
CHARGING
EQ
REGULATORY
Europe – EU Declaration of Conformity
Hereby, SteelSeries ApS. declares that the equipment which is in compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: https://steelseries.com/
SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory complies with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.
Frequency bands and Powers
a. Frequency band(s) in which the radio equipment operates:
•BT and WIFI: 2.400 – 2.4835 GHz; 5.180 – 5.825 GHz
b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
•BT: QPSK: 9.85 dBm
•WIFI: HT20: 8.67 dBm (2.400 – 2.4835 GHz)
•WIFI: HT20: 11.40 dBm (5.180 – 5.825 GHz)
c. Software Version: R00010
Operations in the 5.18 – 5.825 GHz band are restricted to indoor usage only.
Operating Temperature: 0 to + 40 °C.
WEEE
This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
Safety Guideline for Lithium Battery
This battery must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service, or the shop where you purchased the product.
“CAUTION!” Risk of explosion if the battery pack is not replaced by the same type as specified by the manufacturer.
Please keep following all listed important warnings and cautions below while using this battery pack to avoid any damage
or hazard.
1. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
2. Please keep this battery pack away from fire and high heat sources due to an explosion that might happen. Do not place your battery pack close to any heater or hot location.
3. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
4. This battery pack shall not be exposed to moisture, dripping, or splashing.
5. If any electrolyte flows out of this battery pack when touching the user’s eyes and skin, please seek medical advice immediately.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Headset FCC ID: ZHK-HS00019
More information and support at Industry Canada Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
NMB-003 du Canada.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.
The County Code Selection feature is disabled for products marketed in the US/ Canada.
Headset IC: 9638A-HS00019