Made in Italy
MINI JOLLY DALI 20
Direct current dimmable electronic drivers with DIP-SWITCH
Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH
Rated Voltage
Tensione Nominale
110 ÷ 127 V (²)
220 ÷ 240 V
Frequency
Frequenza
50-60 Hz
AC Operation range
Tensione di utilizzo AC
99 ÷ 264 V
DC Operation range
Tensione di utilizzo DC
(see page info15)
176 ÷ 280 V
Power – Potenza
1 ÷ 20 W
iTHD
≤ 10% (¹)
Stand by power
≤ 0,5 W
Output current ripple
≤ 3% (¹)
| Article Articolo | Code Codice |
Dimming type |
Pout W |
V out DC(1) |
I out DC |
U out V |
to °C |
tc °C |
i.. max. Power Factor |
11 max. Efficiency” |
| DC MINI JOLLY DALI DC MINI JOLLY DALI BI |
125403(4 151403(5 125403B1(4) 151403BI(5) |
AM/PWM AM AM/PWIVI AM |
Constant current output – Uscita in Corrente costante | -25…+45 | 75 | 0.95 C | > 87 | |||
| 12 (12(2)) | 15…49 | 250 mA cost. | 55 | |||||||
| 17 (15(2)) | 10…49 | 350 mA cost. | ||||||||
| 19 (15(2)) | 5…49 | 400 mA cost. | ||||||||
| 20 (15(9 | 5…45 | 450 mA cost. | ||||||||
| 20 (15(9 | 5…40 | 500 mA cost. | ||||||||
| 20 (15(9 | 3…36 | 550 mA cost. | ||||||||
| 20 (15(9 | 3…33 | 600 mA cost. | ||||||||
| 20 (15(2)) | 3…28 | 700 mA cost. | ||||||||
| Constant voltage output – Uscita in tensione costante | ||||||||||
| 16 (15’2′) | 24 cost. | 700 mA max. | – | |||||||
(1) Referred to Vin = 230 V, 100% load – Riferito a Vin = 230 V, carico 100%
(3) 125403BIS – 151403BIS – 125403BIBIS – 151403BIBIS:
order codes for BIS marked products – codici di ordine per i prodotti marchiati BIS
Standards compliance
CSA C22.2 no. 223 (¹)
50172 (VDE 0108)
55015
61000-3-2
61000-3-3
61347-1
61347-2-13
61547
62384
62386-101
62386-102
62386-207
UL 1310 (²)
VDE 0710-T14
Max. pcs for CB B16A
(see page info17)
50 pcs
Inrush current
5A 50µsec
Features
- Multipower driver supplied with dip-switch for the selection of the output current.
- IP20 independent driver, for indoor use.
- Class II protection against electric shock for direct or indirect contact.
- Driver for built-in use (DC MINI JOLLY DALI BI).
- It can be used for lighting equipment in protection classes I and II (DC MINI JOLLY DALI BI).
- IP00, creepage distances, and clearances rely on the final application according to IEC/EN 60598-1 (DC MINI JOLLY DALI BI).
- Active Power Factor Corrector.
- Analogical input (NTC) for the thermal sensor connection.
- Current regulation ±5 % including temperature variations.
- Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm 2 / AWG15).
- Clamping screws on primary and secondary circuits for cables with diameter: PRI 5-8 mm / SEC 3-5 mm.
- Protections:
– against overheating and short circuits;
– against mains voltage spikes;
– against overloads. - Thermal protection = C.5.a.
Wiring diagram – Schema di collegamento (Max. LED distance on page info8 – Massima distanza LED a pagina info8)
DALI diagram – Collegamento DALI
Operation Mode
- Features DALI dimming (0/0,5 – 100 %):
– memory function for sets or light groups;
– recall of stored functions;
– compatible with standard DALI interfaces. - (6) Designed to work with DALI-2 systems.
- (4) Default dimming AM+PWM: 1-25% PWM 2 kHz+25-100% AM.
- (4) Full PWM dimming (240 Hz – 1-100%) available by short circuit of NTC for during switch-on of the driver. The same operation to reset to AM+PWM.
- (5) Full AM DIMMING: 1 – 100%.
For additional details for regulations see pages info12-14.
Dimmable multipower drivers – Compact case – DALI
TCI professional LED applications
www.tci.it