|Model||Versa J24 TG||Versa J24 TG RGB|
|Case Type||Middle tower|
|Dimension(H*W*D)||462 x 206 x 414 mm
(18.48 x 8.2 x 16.55 inch)
|Side Panel||3 mm Tempered Glass x 1|
|Cooling SystemCooling System||Rear (exhaust): 120 x 120 x 25 mm fan (1000 rpm, 16 dBA)||Rear (exhaust):
120 x 120 x 25 mm fan (1000 rpm, 16 dBA)
Front (Intake) :
120 x 120 x 25 mm RGB fan
(1000 rpm, 16 dBA) x 3
|2 x 2.5”(HDD Bracket)
2 x 3.5” or 2 x 2.5”(HDD Tray)
|Fan Support||Front: 3 x 120 mm, 2 x 140 mm
Top: 2 x 120 mm, 2 x 140 mm
Rear: 1 x 120 mm
|Radiator Support||ront: 1 x 360 mm
Rear: 1 x 120 mm
|Clearance||CPU cooler height limitation: 160 mm
VGA length limitation: 310 mm
PSU length limitation: 160 mm
|Figure||Parts Name||Q’ty||Used for|
|Screw #6-32 x 6 mm||8||Power Supply|
|Screw #6-32 x 6 mm||17||Motherboard/3.5” HDD|
|Screw M3 x 5 mm||16||2.5″ HDD|
|Screw T5 x 10 mm||12||Fans|
|Screw #6-32 x 30 mm||8||Fans|
|Movable tie||6||Cable Management|
|Power Rear Holder||1||Power Rear Holder|
Warning and Notice
– Height limit for the CPU heatsink:
The height limit for the CPU heatsink is 160 mm (6.3 inches).
– Length limit for the VGA (graphics card):
The length limit for the VGA (graphics card) is 310 mm (12.2 inches).
Side Panel Disassembly
Remove the screws on the back of the chassis, and open the side panel.
Place the power supply in proper location and secure it with screws.
- Lay down the chassis.
- Install the motherboard in proper location and secure it with screws.
3.5″ and 2.5″ HDD Installation
Insert the HDD and tighten it with the screws.
PCI Slot Usage
- Loosen the screws with a screwdriver.
- Install the PCI card in proper location and secure it with screws.
RGB Switch Mode( RGB Edition only) I/O Port
RGB Lighting Mode 1
Single Color Mode 2~8 (Red, Yellow, Green, Cyan, Blue, White, Purple)
Breath Mode Mode 9~15 (Red, Yellow, Green, Cyan, Blue, White, Purple)
Light Off Mode 16
Long press on RGB button for 3 seconds , fans will blink red light twice which now are controlled by MB software. And vice versa.
How to connect MB
Air Cooling Installation
The radiator is applicable up to 40 mm high
Leads Installation Guide
Case LED Connection / On the front of the case, you can find some LEDs and switch leads. Please consult your user manual of your motherboard manufacturer, then connect these leads to the panel header on the motherboard.
USB 3.0 connection /
- Make sure your motherboard supports USB 3.0 connection.
- Connect the USB 3.0 cable to the available USB 3.0 port on your computer.
Audio Connection / Please refer to the following illustration of Audio connector and your motherboard user manual. Please select the motherboard which used AC’97 or HD Audio(Azalia),(be aware of that your audio supports AC’97 or HD Audio (Azalia)) or it will damage your device(s).
Thermaltake Power Supply Series (Optional)
What is Smart Power Management (SPM)?
Smart Power Management (SPM) is a cloud-based software that seamlessly integrates three intelligent platforms — DPS G PC APP 3.0, DPS G Smart Power Management Cloud 1.0 and DPS G Mobile APP 1.0 — and compiles key statistics about your PC into detailed charts and breakdowns for your instant PC status view and management. With easy access to SPM through your PC or mobile devices, whether you are outside or indoors, enjoy taking full control of your build anytime, anywhere!
Thermaltake has several power supply product lines;
please refer to our official website and Facebook Fan Page for more detail information!
Brand official website:
Tt RGB Plus Ecosystem
Tt RGB Plus Software
Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
Tt Al Voice Control Give you full control over the TT RGB PLUS products with your voice.
© 2018 Thermaltake Technology Co., Ltd. All Rights Reserved. A-2018.07
All other registered trademarks belong to their respective companies. www.thermaltake.com